lkml.org 
[lkml]   [2016]   [Jul]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v4 1/2] of: add J-Core interrupt controller bindings
On Wed, Jul 27, 2016 at 05:35:09AM +0000, Rich Felker wrote:
> Signed-off-by: Rich Felker <dalias@libc.org>
> ---
> .../bindings/interrupt-controller/jcore,aic.txt | 26 ++++++++++++++++++++++
> 1 file changed, 26 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/interrupt-controller/jcore,aic.txt
>
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/jcore,aic.txt b/Documentation/devicetree/bindings/interrupt-controller/jcore,aic.txt
> new file mode 100644
> index 0000000..b7a56ad
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interrupt-controller/jcore,aic.txt
> @@ -0,0 +1,26 @@
> +J-Core Advanced Interrupt Controller
> +
> +Required properties:
> +
> +- compatible: Should be "jcore,aic1" for the (obsolete) first-generation aic
> + with 8 interrupt lines with programmable priorities, or "jcore,aic2" for
> + the "aic2" core with 64 interrupts.
> +
> +- reg: Memory region(s) for configuration. For SMP, there should be one
> + region per cpu, indexed by the sequential, zero-based hardware cpu
> + number (which is also the logical cpu number).
Nit: remove the bit about the logical number. That's a linux detail that
doesn't belong in the binding.

> +- interrupt-controller: Identifies the node as an interrupt controller
> +
> +- #interrupt-cells: Specifies the number of cells needed to encode an
> + interrupt source. The value shall be 1.

... where the value encoded in that cell is?

I guess it's the zero-based index of the interrupt?

No flags? Can the AIC only do one trigger type?

Thanks,
Mark.

\
 
 \ /
  Last update: 2016-07-27 12:41    [W:0.081 / U:0.420 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site