lkml.org 
[lkml]   [2016]   [Jul]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3] i2c: i2c-cros-ec-tunnel: Reduce logging noise
Date
If an i2c access through i2c-cros-ec-tunnel returns an error, the following
log message is seen on the console.

cros-ec-i2c-tunnel ff200000.spi:ec@0:i2c-tunnel:
Error parsing EC i2c message -121

This can happen a lot if, for example, the i2c-detect command is executed.

Since it is perfectly normal for an i2c controller to report an error,
drop the message. Also, report -ENXIO instead of -EREMOTEIO if the access
error is due to NAK from the device, and return -EIO instead of -EREMOTEIO
for other errors, as suggested in Documentation/i2c/fault-codes.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
v3: Do not assume that unknown status bits reflect an error.
v2: Drop message entirely instead of replacing it with dev_dbg,
and return -EIO instead of -EREMOTEIO for unknown errors.

drivers/i2c/busses/i2c-cros-ec-tunnel.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/i2c/busses/i2c-cros-ec-tunnel.c b/drivers/i2c/busses/i2c-cros-ec-tunnel.c
index a0d95ff682ae..0e9653852069 100644
--- a/drivers/i2c/busses/i2c-cros-ec-tunnel.c
+++ b/drivers/i2c/busses/i2c-cros-ec-tunnel.c
@@ -154,8 +154,10 @@ static int ec_i2c_parse_response(const u8 *buf, struct i2c_msg i2c_msgs[],
resp = (const struct ec_response_i2c_passthru *)buf;
if (resp->i2c_status & EC_I2C_STATUS_TIMEOUT)
return -ETIMEDOUT;
+ else if (resp->i2c_status & EC_I2C_STATUS_NAK)
+ return -ENXIO;
else if (resp->i2c_status & EC_I2C_STATUS_ERROR)
- return -EREMOTEIO;
+ return -EIO;

/* Other side could send us back fewer messages, but not more */
if (resp->num_msgs > *num)
@@ -222,10 +224,8 @@ static int ec_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg i2c_msgs[],
}

result = ec_i2c_parse_response(msg->data, i2c_msgs, &num);
- if (result < 0) {
- dev_err(dev, "Error parsing EC i2c message %d\n", result);
+ if (result < 0)
goto exit;
- }

/* Indicate success by saying how many messages were sent */
result = num;
--
2.5.0
\
 
 \ /
  Last update: 2016-07-27 01:21    [W:0.098 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site