lkml.org 
[lkml]   [2016]   [Jul]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4] ARM: dts: sun8i: Add dts file for Olimex A33-OLinuXino
Hi Stefan,

On Mon, Jul 25, 2016 at 03:37:23PM +0300, Stefan Mavrodiev wrote:
> A33-OLinuXino is A33 development board designed by Olimex LTD.
>
> It has AXP233 PMU, 1GB DRAM, a micro SD card, one USB-OTG connector,
> headphone and mic jacks, connector for LiPo battery and optional
> 4GB NAND Flash.
>
> It has two 40-pin headers. One for LCD panel, and one for
> additional modules. Also there is CSI/DSI connector.
>
> Signed-off-by: Stefan Mavrodiev <stefan.mavrodiev@gmail.com>

It looks mostly good, a few comments though.
> +&pio {
> + led_pin_olinuxino: led_pins@0 {
> + allwinner,pins = "PB7";
> + allwinner,function = "gpio_out";

This line is not properly indented.

> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> + };

And this one too.

> +&reg_dc1sw {
> + regulator-name = "vcc-lcd";
> +};

No constraints on this one?

> +&reg_dcdc1 {
> + regulator-always-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "vcc-dsi";
> +};

What is it used for? Is it really necessary to keep it on at all time?

Thanks,
Maxime

--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2016-07-26 18:01    [W:0.060 / U:0.644 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site