lkml.org 
[lkml]   [2016]   [Jul]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 4/9] media: adv7180: add power pin control
Date
Some targets control the ADV7180 power pin via a gpio, so add
optional support for "powerdown" pin control.

Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Tested-by: Tim Harvey <tharvey@gateworks.com>
Acked-by: Tim Harvey <tharvey@gateworks.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>

---

v3: no changes

v2:
- placed call to gpiod_get inline in adv7180_probe().
- rename gpio pin to "powerdown".
- document optional powerdown-gpios property in
Documentation/devicetree/bindings/media/i2c/adv7180.txt.
- include error number in error message on gpiod_get failure.
---
.../devicetree/bindings/media/i2c/adv7180.txt | 4 ++++
drivers/media/i2c/Kconfig | 2 +-
drivers/media/i2c/adv7180.c | 27 ++++++++++++++++++++++
3 files changed, 32 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/media/i2c/adv7180.txt b/Documentation/devicetree/bindings/media/i2c/adv7180.txt
index 6c175d2..ab9ef02 100644
--- a/Documentation/devicetree/bindings/media/i2c/adv7180.txt
+++ b/Documentation/devicetree/bindings/media/i2c/adv7180.txt
@@ -15,6 +15,10 @@ Required Properties :
"adi,adv7282"
"adi,adv7282-m"

+Optional Properties :
+- powerdown-gpios: reference to the GPIO connected to the powerdown pin,
+ if any.
+
Optional Endpoint Properties :
- newavmode: a boolean property to indicate the BT.656 bus is operating
in Analog Device's NEWAVMODE. Valid for BT.656 busses only.
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index ce9006e..6769898 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -187,7 +187,7 @@ comment "Video decoders"

config VIDEO_ADV7180
tristate "Analog Devices ADV7180 decoder"
- depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
+ depends on GPIOLIB && VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
---help---
Support for the Analog Devices ADV7180 video decoder.

diff --git a/drivers/media/i2c/adv7180.c b/drivers/media/i2c/adv7180.c
index 3067d5f..58f4eca 100644
--- a/drivers/media/i2c/adv7180.c
+++ b/drivers/media/i2c/adv7180.c
@@ -26,6 +26,7 @@
#include <linux/i2c.h>
#include <linux/slab.h>
#include <linux/of.h>
+#include <linux/gpio/consumer.h>
#include <linux/videodev2.h>
#include <media/v4l2-ioctl.h>
#include <media/v4l2-event.h>
@@ -215,6 +216,7 @@ struct adv7180_state {
struct media_pad pad;
struct mutex mutex; /* mutual excl. when accessing chip */
int irq;
+ struct gpio_desc *pwdn_gpio;
v4l2_std_id curr_norm;
bool newavmode;
bool powered;
@@ -466,6 +468,19 @@ static int adv7180_g_std(struct v4l2_subdev *sd, v4l2_std_id *norm)
return 0;
}

+static void adv7180_set_power_pin(struct adv7180_state *state, bool on)
+{
+ if (!state->pwdn_gpio)
+ return;
+
+ if (on) {
+ gpiod_set_value_cansleep(state->pwdn_gpio, 0);
+ usleep_range(5000, 10000);
+ } else {
+ gpiod_set_value_cansleep(state->pwdn_gpio, 1);
+ }
+}
+
static int adv7180_set_power(struct adv7180_state *state, bool on)
{
u8 val;
@@ -1219,6 +1234,8 @@ static int init_device(struct adv7180_state *state)

mutex_lock(&state->mutex);

+ adv7180_set_power_pin(state, true);
+
adv7180_write(state, ADV7180_REG_PWR_MAN, ADV7180_PWR_MAN_RES);
usleep_range(5000, 10000);

@@ -1319,6 +1336,14 @@ static int adv7180_probe(struct i2c_client *client,

adv7180_of_parse(state);

+ state->pwdn_gpio = devm_gpiod_get_optional(&client->dev, "powerdown",
+ GPIOD_OUT_HIGH);
+ if (IS_ERR(state->pwdn_gpio)) {
+ ret = PTR_ERR(state->pwdn_gpio);
+ v4l_err(client, "request for power pin failed: %d\n", ret);
+ return ret;
+ }
+
if (state->chip_info->flags & ADV7180_FLAG_MIPI_CSI2) {
state->csi_client = i2c_new_dummy(client->adapter,
ADV7180_DEFAULT_CSI_I2C_ADDR);
@@ -1410,6 +1435,8 @@ static int adv7180_remove(struct i2c_client *client)
if (state->chip_info->flags & ADV7180_FLAG_MIPI_CSI2)
i2c_unregister_device(state->csi_client);

+ adv7180_set_power_pin(state, false);
+
mutex_destroy(&state->mutex);

return 0;
--
1.9.1
\
 
 \ /
  Last update: 2016-07-23 19:41    [W:0.097 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site