lkml.org 
[lkml]   [2016]   [Jul]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [v6 PATCH 1/6] extcon: Add Type-C and DP support
To create a baseline, I'll pick up the changes from the extcon
repository and make them available in chromeos-4.4.

Guenter

On Fri, Jul 22, 2016 at 2:40 AM, Chris Zhong <zyw@rock-chips.com> wrote:
> Hi Chanwoo Choi
>
> Thanks for your help, I am going to post V7 next week base on these latest
> extcon patch.
>
> Regards
> Chris Zhong
>
>
> On 07/22/2016 05:29 PM, Chanwoo Choi wrote:
>>
>> Hi Chris,
>>
>> I'm sorry for late reply. I finished the first draft to support the extcon
>> property.
>> You can check the patches[1]. But, I need more time to test it. After
>> tested it,
>> I'll send the patches.
>>
>> [1]
>> https://git.kernel.org/cgit/linux/kernel/git/chanwoo/extcon.git/log/?h=extcon-test
>>
>> Chanwoo Choi (4):
>> extcon: Add the extcon_type to group each connector into five category
>> extcon: Add the support for extcon property according to type of
>> connector
>> extcon: Rename the extcon_set/get_state() to maintain the function
>> naming pattern
>> extcon: Add the sync APIs to support the notification for extcon
>> property
>>
>> Chris Zhong (1):
>> extcon: Add EXTCON_DISP_DP and the property for USB Type-C
>>
>> Regards,
>> Chanwoo Choi
>>
>> On 2016년 07월 21일 22:13, Chris Zhong wrote:
>>>
>>> Add EXTCON_DISP_DP for the Display external connector. For Type-C
>>> connector the DisplayPort can work as an Alternate Mode(VESA DisplayPort
>>> Alt Mode on USB Type-C Standard). The Type-C support both normal and
>>> flipped orientation, so add a property to extcon.
>>>
>>> Signe-off-by: Chris Zhong <zyw@rock-chips.com>
>>>
>>> Signed-off-by: Chris Zhong <zyw@rock-chips.com>
>>> ---
>>>
>>> Changes in v6:
>>> - move the EXTCON_PROP_TYPEC_POLARITY to EXTCON_TYPE_USB in _supported
>>> Series-changes: 5
>>> - support get property
>>>
>>> Changes in v5: None
>>> Changes in v4: None
>>> Changes in v3: None
>>> Changes in v2: None
>>> Changes in v1: None
>>>
>>> drivers/extcon/extcon.c | 26 ++++++++++++++++++++++++++
>>> include/linux/extcon.h | 13 +++++++++++++
>>> 2 files changed, 39 insertions(+)
>>>
>>> diff --git a/drivers/extcon/extcon.c b/drivers/extcon/extcon.c
>>> index a1117db..f79b510 100644
>>> --- a/drivers/extcon/extcon.c
>>> +++ b/drivers/extcon/extcon.c
>>> @@ -157,6 +157,11 @@ struct __extcon_info {
>>> .id = EXTCON_DISP_VGA,
>>> .name = "VGA",
>>> },
>>> + [EXTCON_DISP_DP] = {
>>> + .type = EXTCON_TYPE_DISP | EXTCON_TYPE_USB,
>>> + .id = EXTCON_DISP_DP,
>>> + .name = "DP",
>>> + },
>>> /* Miscellaneous external connector */
>>> [EXTCON_DOCK] = {
>>> @@ -270,6 +275,7 @@ static bool is_extcon_property_supported(unsigned int
>>> id,
>>> switch (prop) {
>>> case EXTCON_PROP_USB_ID:
>>> case EXTCON_PROP_USB_VBUS:
>>> + case EXTCON_PROP_TYPEC_POLARITY:
>>> return true;
>>> default:
>>> break;
>>> @@ -547,6 +553,26 @@ int extcon_get_cable_property(struct extcon_dev
>>> *edev, unsigned int id,
>>> enum extcon_property prop,
>>> union extcon_property_value *val)
>>> {
>>> + struct extcon_cable *cable;
>>> + int index;
>>> +
>>> + if (!edev)
>>> + return -EINVAL;
>>> +
>>> + /* Check the property whether is supported or not */
>>> + if (!is_extcon_property_supported(id, prop))
>>> + return -EINVAL;
>>> +
>>> + /* Find the cable index of external connector by using id */
>>> + index = find_cable_index_by_id(edev, id);
>>> + if (index < 0)
>>> + return index;
>>> +
>>> + /* Store the property value */
>>> + cable = &edev->cables[index];
>>> +
>>> + val->intval = cable->propval[prop].intval;
>>> +
>>> return 0;
>>> }
>>> diff --git a/include/linux/extcon.h b/include/linux/extcon.h
>>> index f6f0a8d..50ef87f 100644
>>> --- a/include/linux/extcon.h
>>> +++ b/include/linux/extcon.h
>>> @@ -77,6 +77,7 @@ enum extcon_type {
>>> #define EXTCON_DISP_MHL 41 /* Mobile High-Definition
>>> Link */
>>> #define EXTCON_DISP_DVI 42 /* Digital Visual
>>> Interface */
>>> #define EXTCON_DISP_VGA 43 /* Video Graphics Array
>>> */
>>> +#define EXTCON_DISP_DP 44 /* DisplayPort */
>>> /* Miscellaneous external connector */
>>> #define EXTCON_DOCK 60
>>> @@ -108,9 +109,13 @@ enum extcon_property {
>>> * - EXTCON_PROP_USB_USB
>>> * @type: integer (int value)
>>> * @value: 0 (low) or 1 (high)
>>> + * - EXTCON_PROP_TYPEC_POLARITY,
>>> + * @type: integer (int value)
>>> + * @value: 0 (normal) or 1 (flip)
>>> */
>>> EXTCON_PROP_USB_ID = 0,
>>> EXTCON_PROP_USB_VBUS,
>>> + EXTCON_PROP_TYPEC_POLARITY,
>>> /* Properties of EXTCON_TYPE_CHG. */
>>> /* Properties of EXTCON_TYPE_JACK. */
>>> @@ -225,6 +230,14 @@ extern int extcon_get_cable_state_(struct extcon_dev
>>> *edev, unsigned int id);
>>> extern int extcon_set_cable_state_(struct extcon_dev *edev, unsigned
>>> int id,
>>> bool cable_state);
>>> +extern int extcon_get_cable_property(struct extcon_dev *edev, unsigned
>>> int id,
>>> + enum extcon_property prop,
>>> + union extcon_property_value *val);
>>> +
>>> +extern int extcon_set_cable_property(struct extcon_dev *edev, unsigned
>>> int id,
>>> + enum extcon_property prop,
>>> + union extcon_property_value val);
>>> +
>>> /*
>>> * Following APIs are to monitor every action of a notifier.
>>> * Registrar gets notified for every external port of a connection
>>> device.
>>>
>>
>>
>>
>
>

\
 
 \ /
  Last update: 2016-07-22 20:01    [W:0.080 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site