lkml.org 
[lkml]   [2016]   [Jul]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 11/13] rapidio: modify for rev.3 specification changes
Date
Implement changes made in RapidIO specification rev.3 to LP-Serial Physical
Layer register definitions:
- use per-port register offset calculations based on LP-Serial Extended
Features Block (EFB) Register Map type (I or II) with different per-port
offset step (0x20 vs. 0x40 respectfully).
- remove deprecated Parallel Physical layer definitions and related code.

Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Tested-by: Barry Wood <barry.wood@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com>
Cc: Barry Wood <barry.wood@idt.com>
Cc: linux-kernel@vger.kernel.org
---
drivers/rapidio/devices/rio_mport_cdev.c | 2 +-
drivers/rapidio/devices/tsi721.c | 8 +-
drivers/rapidio/rio-scan.c | 74 +++----------
drivers/rapidio/rio.c | 149 ++++++++++++++-------------
drivers/rapidio/rio.h | 2 +-
drivers/rapidio/switches/tsi57x.c | 26 ++---
include/linux/rio.h | 11 +--
include/linux/rio_regs.h | 167 +++++++++++++++++++++++------
8 files changed, 248 insertions(+), 191 deletions(-)

diff --git a/drivers/rapidio/devices/rio_mport_cdev.c b/drivers/rapidio/devices/rio_mport_cdev.c
index de0c692..436dfe8 100644
--- a/drivers/rapidio/devices/rio_mport_cdev.c
+++ b/drivers/rapidio/devices/rio_mport_cdev.c
@@ -1813,7 +1813,7 @@ static int rio_mport_add_riodev(struct mport_cdev_priv *priv,
if (rdev->pef & RIO_PEF_EXT_FEATURES) {
rdev->efptr = rval & 0xffff;
rdev->phys_efptr = rio_mport_get_physefb(mport, 0, destid,
- hopcount);
+ hopcount, &rdev->phys_rmap);

rdev->em_efptr = rio_mport_get_feature(mport, 0, destid,
hopcount, RIO_EFB_ERR_MGMNT);
diff --git a/drivers/rapidio/devices/tsi721.c b/drivers/rapidio/devices/tsi721.c
index 53daf63..32f0f01 100644
--- a/drivers/rapidio/devices/tsi721.c
+++ b/drivers/rapidio/devices/tsi721.c
@@ -2555,11 +2555,11 @@ static int tsi721_query_mport(struct rio_mport *mport,
struct tsi721_device *priv = mport->priv;
u32 rval;

- rval = ioread32(priv->regs + (0x100 + RIO_PORT_N_ERR_STS_CSR(0)));
+ rval = ioread32(priv->regs + 0x100 + RIO_PORT_N_ERR_STS_CSR(0, 0));
if (rval & RIO_PORT_N_ERR_STS_PORT_OK) {
- rval = ioread32(priv->regs + (0x100 + RIO_PORT_N_CTL2_CSR(0)));
+ rval = ioread32(priv->regs + 0x100 + RIO_PORT_N_CTL2_CSR(0, 0));
attr->link_speed = (rval & RIO_PORT_N_CTL2_SEL_BAUD) >> 28;
- rval = ioread32(priv->regs + (0x100 + RIO_PORT_N_CTL_CSR(0)));
+ rval = ioread32(priv->regs + 0x100 + RIO_PORT_N_CTL_CSR(0, 0));
attr->link_width = (rval & RIO_PORT_N_CTL_IPW) >> 27;
} else
attr->link_speed = RIO_LINK_DOWN;
@@ -2673,9 +2673,9 @@ static int tsi721_setup_mport(struct tsi721_device *priv)
mport->ops = &tsi721_rio_ops;
mport->index = 0;
mport->sys_size = 0; /* small system */
- mport->phy_type = RIO_PHY_SERIAL;
mport->priv = (void *)priv;
mport->phys_efptr = 0x100;
+ mport->phys_rmap = 1;
mport->dev.parent = &pdev->dev;
mport->dev.release = tsi721_mport_release;

diff --git a/drivers/rapidio/rio-scan.c b/drivers/rapidio/rio-scan.c
index a63a380..23429bd 100644
--- a/drivers/rapidio/rio-scan.c
+++ b/drivers/rapidio/rio-scan.c
@@ -49,15 +49,6 @@ struct rio_id_table {
static int next_destid = 0;
static int next_comptag = 1;

-static int rio_mport_phys_table[] = {
- RIO_EFB_PAR_EP_ID,
- RIO_EFB_PAR_EP_REC_ID,
- RIO_EFB_SER_EP_ID,
- RIO_EFB_SER_EP_REC_ID,
- -1,
-};
-
-
/**
* rio_destid_alloc - Allocate next available destID for given network
* @net: RIO network
@@ -380,10 +371,15 @@ static struct rio_dev *rio_setup_device(struct rio_net *net,
if (rdev->pef & RIO_PEF_EXT_FEATURES) {
rdev->efptr = result & 0xffff;
rdev->phys_efptr = rio_mport_get_physefb(port, 0, destid,
- hopcount);
+ hopcount, &rdev->phys_rmap);
+ pr_debug("RIO: %s Register Map %d device\n",
+ __func__, rdev->phys_rmap);

rdev->em_efptr = rio_mport_get_feature(port, 0, destid,
hopcount, RIO_EFB_ERR_MGMNT);
+ if (!rdev->em_efptr)
+ rdev->em_efptr = rio_mport_get_feature(port, 0, destid,
+ hopcount, RIO_EFB_ERR_MGMNT_HS);
}

rio_mport_read_config_32(port, destid, hopcount, RIO_SRC_OPS_CAR,
@@ -445,7 +441,7 @@ static struct rio_dev *rio_setup_device(struct rio_net *net,
rio_route_clr_table(rdev, RIO_GLOBAL_TABLE, 0);
} else {
if (do_enum)
- /*Enable Input Output Port (transmitter reviever)*/
+ /*Enable Input Output Port (transmitter receiver)*/
rio_enable_rx_tx_port(port, 0, destid, hopcount, 0);

dev_set_name(&rdev->dev, "%02x:e:%04x", rdev->net->id,
@@ -481,10 +477,8 @@ cleanup:

/**
* rio_sport_is_active- Tests if a switch port has an active connection.
- * @port: Master port to send transaction
- * @destid: Associated destination ID for switch
- * @hopcount: Hopcount to reach switch
- * @sport: Switch port number
+ * @rdev: RapidIO device object
+ * @sp: Switch port number
*
* Reads the port error status CSR for a particular switch port to
* determine if the port has an active link. Returns
@@ -492,31 +486,12 @@ cleanup:
* inactive.
*/
static int
-rio_sport_is_active(struct rio_mport *port, u16 destid, u8 hopcount, int sport)
+rio_sport_is_active(struct rio_dev *rdev, int sp)
{
u32 result = 0;
- u32 ext_ftr_ptr;

- ext_ftr_ptr = rio_mport_get_efb(port, 0, destid, hopcount, 0);
-
- while (ext_ftr_ptr) {
- rio_mport_read_config_32(port, destid, hopcount,
- ext_ftr_ptr, &result);
- result = RIO_GET_BLOCK_ID(result);
- if ((result == RIO_EFB_SER_EP_FREE_ID) ||
- (result == RIO_EFB_SER_EP_FREE_ID_V13P) ||
- (result == RIO_EFB_SER_EP_FREC_ID))
- break;
-
- ext_ftr_ptr = rio_mport_get_efb(port, 0, destid, hopcount,
- ext_ftr_ptr);
- }
-
- if (ext_ftr_ptr)
- rio_mport_read_config_32(port, destid, hopcount,
- ext_ftr_ptr +
- RIO_PORT_N_ERR_STS_CSR(sport),
- &result);
+ rio_read_config_32(rdev, RIO_DEV_PORT_N_ERR_STS_CSR(rdev, sp),
+ &result);

return result & RIO_PORT_N_ERR_STS_PORT_OK;
}
@@ -655,9 +630,7 @@ static int rio_enum_peer(struct rio_net *net, struct rio_mport *port,

cur_destid = next_destid;

- if (rio_sport_is_active
- (port, RIO_ANY_DESTID(port->sys_size), hopcount,
- port_num)) {
+ if (rio_sport_is_active(rdev, port_num)) {
pr_debug(
"RIO: scanning device on port %d\n",
port_num);
@@ -785,8 +758,7 @@ rio_disc_peer(struct rio_net *net, struct rio_mport *port, u16 destid,
if (RIO_GET_PORT_NUM(rdev->swpinfo) == port_num)
continue;

- if (rio_sport_is_active
- (port, destid, hopcount, port_num)) {
+ if (rio_sport_is_active(rdev, port_num)) {
pr_debug(
"RIO: scanning device on port %d\n",
port_num);
@@ -831,21 +803,11 @@ rio_disc_peer(struct rio_net *net, struct rio_mport *port, u16 destid,
static int rio_mport_is_active(struct rio_mport *port)
{
u32 result = 0;
- u32 ext_ftr_ptr;
- int *entry = rio_mport_phys_table;
-
- do {
- if ((ext_ftr_ptr =
- rio_mport_get_feature(port, 1, 0, 0, *entry)))
- break;
- } while (*++entry >= 0);
-
- if (ext_ftr_ptr)
- rio_local_read_config_32(port,
- ext_ftr_ptr +
- RIO_PORT_N_ERR_STS_CSR(port->index),
- &result);

+ rio_local_read_config_32(port,
+ port->phys_efptr +
+ RIO_PORT_N_ERR_STS_CSR(port->index, port->phys_rmap),
+ &result);
return result & RIO_PORT_N_ERR_STS_PORT_OK;
}

diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c
index 1cd3260..3de81e0 100644
--- a/drivers/rapidio/rio.c
+++ b/drivers/rapidio/rio.c
@@ -789,7 +789,7 @@ EXPORT_SYMBOL_GPL(rio_unmap_outb_region);
*/
u32
rio_mport_get_physefb(struct rio_mport *port, int local,
- u16 destid, u8 hopcount)
+ u16 destid, u8 hopcount, u32 *rmap)
{
u32 ext_ftr_ptr;
u32 ftr_header;
@@ -807,14 +807,21 @@ rio_mport_get_physefb(struct rio_mport *port, int local,
ftr_header = RIO_GET_BLOCK_ID(ftr_header);
switch (ftr_header) {

- case RIO_EFB_SER_EP_ID_V13P:
- case RIO_EFB_SER_EP_REC_ID_V13P:
- case RIO_EFB_SER_EP_FREE_ID_V13P:
case RIO_EFB_SER_EP_ID:
case RIO_EFB_SER_EP_REC_ID:
case RIO_EFB_SER_EP_FREE_ID:
- case RIO_EFB_SER_EP_FREC_ID:
+ case RIO_EFB_SER_EP_M1_ID:
+ case RIO_EFB_SER_EP_SW_M1_ID:
+ case RIO_EFB_SER_EPF_M1_ID:
+ case RIO_EFB_SER_EPF_SW_M1_ID:
+ *rmap = 1;
+ return ext_ftr_ptr;

+ case RIO_EFB_SER_EP_M2_ID:
+ case RIO_EFB_SER_EP_SW_M2_ID:
+ case RIO_EFB_SER_EPF_M2_ID:
+ case RIO_EFB_SER_EPF_SW_M2_ID:
+ *rmap = 2;
return ext_ftr_ptr;

default:
@@ -873,16 +880,16 @@ int rio_set_port_lockout(struct rio_dev *rdev, u32 pnum, int lock)
u32 regval;

rio_read_config_32(rdev,
- rdev->phys_efptr + RIO_PORT_N_CTL_CSR(pnum),
- &regval);
+ RIO_DEV_PORT_N_CTL_CSR(rdev, pnum),
+ &regval);
if (lock)
regval |= RIO_PORT_N_CTL_LOCKOUT;
else
regval &= ~RIO_PORT_N_CTL_LOCKOUT;

rio_write_config_32(rdev,
- rdev->phys_efptr + RIO_PORT_N_CTL_CSR(pnum),
- regval);
+ RIO_DEV_PORT_N_CTL_CSR(rdev, pnum),
+ regval);
return 0;
}
EXPORT_SYMBOL_GPL(rio_set_port_lockout);
@@ -906,6 +913,7 @@ int rio_enable_rx_tx_port(struct rio_mport *port,
#ifdef CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS
u32 regval;
u32 ext_ftr_ptr;
+ u32 rmap;

/*
* enable rx input tx output port
@@ -913,34 +921,29 @@ int rio_enable_rx_tx_port(struct rio_mport *port,
pr_debug("rio_enable_rx_tx_port(local = %d, destid = %d, hopcount = "
"%d, port_num = %d)\n", local, destid, hopcount, port_num);

- ext_ftr_ptr = rio_mport_get_physefb(port, local, destid, hopcount);
+ ext_ftr_ptr = rio_mport_get_physefb(port, local, destid,
+ hopcount, &rmap);

if (local) {
- rio_local_read_config_32(port, ext_ftr_ptr +
- RIO_PORT_N_CTL_CSR(0),
+ rio_local_read_config_32(port,
+ ext_ftr_ptr + RIO_PORT_N_CTL_CSR(0, rmap),
&regval);
} else {
if (rio_mport_read_config_32(port, destid, hopcount,
- ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num), &regval) < 0)
+ ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num, rmap),
+ &regval) < 0)
return -EIO;
}

- if (regval & RIO_PORT_N_CTL_P_TYP_SER) {
- /* serial */
- regval = regval | RIO_PORT_N_CTL_EN_RX_SER
- | RIO_PORT_N_CTL_EN_TX_SER;
- } else {
- /* parallel */
- regval = regval | RIO_PORT_N_CTL_EN_RX_PAR
- | RIO_PORT_N_CTL_EN_TX_PAR;
- }
+ regval = regval | RIO_PORT_N_CTL_EN_RX | RIO_PORT_N_CTL_EN_TX;

if (local) {
- rio_local_write_config_32(port, ext_ftr_ptr +
- RIO_PORT_N_CTL_CSR(0), regval);
+ rio_local_write_config_32(port,
+ ext_ftr_ptr + RIO_PORT_N_CTL_CSR(0, rmap), regval);
} else {
if (rio_mport_write_config_32(port, destid, hopcount,
- ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num), regval) < 0)
+ ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num, rmap),
+ regval) < 0)
return -EIO;
}
#endif
@@ -1042,14 +1045,14 @@ rio_get_input_status(struct rio_dev *rdev, int pnum, u32 *lnkresp)
/* Read from link maintenance response register
* to clear valid bit */
rio_read_config_32(rdev,
- rdev->phys_efptr + RIO_PORT_N_MNT_RSP_CSR(pnum),
+ RIO_DEV_PORT_N_MNT_RSP_CSR(rdev, pnum),
&regval);
udelay(50);
}

/* Issue Input-status command */
rio_write_config_32(rdev,
- rdev->phys_efptr + RIO_PORT_N_MNT_REQ_CSR(pnum),
+ RIO_DEV_PORT_N_MNT_REQ_CSR(rdev, pnum),
RIO_MNT_REQ_CMD_IS);

/* Exit if the response is not expected */
@@ -1060,7 +1063,7 @@ rio_get_input_status(struct rio_dev *rdev, int pnum, u32 *lnkresp)
while (checkcount--) {
udelay(50);
rio_read_config_32(rdev,
- rdev->phys_efptr + RIO_PORT_N_MNT_RSP_CSR(pnum),
+ RIO_DEV_PORT_N_MNT_RSP_CSR(rdev, pnum),
&regval);
if (regval & RIO_PORT_N_MNT_RSP_RVAL) {
*lnkresp = regval;
@@ -1076,6 +1079,13 @@ rio_get_input_status(struct rio_dev *rdev, int pnum, u32 *lnkresp)
* @rdev: Pointer to RIO device control structure
* @pnum: Switch port number to clear errors
* @err_status: port error status (if 0 reads register from device)
+ *
+ * TODO: Currently this routine is not compatible with recovery process
+ * specified for idt_gen3 RapidIO switch devices. It has to be reviewed
+ * to implement universal recovery process that is compatible full range
+ * off available devices.
+ * IDT gen3 switch driver now implements HW-specific error handler that
+ * issues soft port reset to the port to reset ERR_STOP bits and ackIDs.
*/
static int rio_clr_err_stopped(struct rio_dev *rdev, u32 pnum, u32 err_status)
{
@@ -1085,10 +1095,10 @@ static int rio_clr_err_stopped(struct rio_dev *rdev, u32 pnum, u32 err_status)

if (err_status == 0)
rio_read_config_32(rdev,
- rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(pnum),
+ RIO_DEV_PORT_N_ERR_STS_CSR(rdev, pnum),
&err_status);

- if (err_status & RIO_PORT_N_ERR_STS_PW_OUT_ES) {
+ if (err_status & RIO_PORT_N_ERR_STS_OUT_ES) {
pr_debug("RIO_EM: servicing Output Error-Stopped state\n");
/*
* Send a Link-Request/Input-Status control symbol
@@ -1103,7 +1113,7 @@ static int rio_clr_err_stopped(struct rio_dev *rdev, u32 pnum, u32 err_status)
far_ackid = (regval & RIO_PORT_N_MNT_RSP_ASTAT) >> 5;
far_linkstat = regval & RIO_PORT_N_MNT_RSP_LSTAT;
rio_read_config_32(rdev,
- rdev->phys_efptr + RIO_PORT_N_ACK_STS_CSR(pnum),
+ RIO_DEV_PORT_N_ACK_STS_CSR(rdev, pnum),
&regval);
pr_debug("RIO_EM: SP%d_ACK_STS_CSR=0x%08x\n", pnum, regval);
near_ackid = (regval & RIO_PORT_N_ACK_INBOUND) >> 24;
@@ -1121,43 +1131,43 @@ static int rio_clr_err_stopped(struct rio_dev *rdev, u32 pnum, u32 err_status)
* far inbound.
*/
rio_write_config_32(rdev,
- rdev->phys_efptr + RIO_PORT_N_ACK_STS_CSR(pnum),
+ RIO_DEV_PORT_N_ACK_STS_CSR(rdev, pnum),
(near_ackid << 24) |
(far_ackid << 8) | far_ackid);
/* Align far outstanding/outbound ackIDs with
* near inbound.
*/
far_ackid++;
- if (nextdev)
- rio_write_config_32(nextdev,
- nextdev->phys_efptr +
- RIO_PORT_N_ACK_STS_CSR(RIO_GET_PORT_NUM(nextdev->swpinfo)),
- (far_ackid << 24) |
- (near_ackid << 8) | near_ackid);
- else
- pr_debug("RIO_EM: Invalid nextdev pointer (NULL)\n");
+ if (!nextdev) {
+ pr_debug("RIO_EM: nextdev pointer == NULL\n");
+ goto rd_err;
+ }
+
+ rio_write_config_32(nextdev,
+ RIO_DEV_PORT_N_ACK_STS_CSR(nextdev,
+ RIO_GET_PORT_NUM(nextdev->swpinfo)),
+ (far_ackid << 24) |
+ (near_ackid << 8) | near_ackid);
}
rd_err:
- rio_read_config_32(rdev,
- rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(pnum),
- &err_status);
+ rio_read_config_32(rdev, RIO_DEV_PORT_N_ERR_STS_CSR(rdev, pnum),
+ &err_status);
pr_debug("RIO_EM: SP%d_ERR_STS_CSR=0x%08x\n", pnum, err_status);
}

- if ((err_status & RIO_PORT_N_ERR_STS_PW_INP_ES) && nextdev) {
+ if ((err_status & RIO_PORT_N_ERR_STS_INP_ES) && nextdev) {
pr_debug("RIO_EM: servicing Input Error-Stopped state\n");
rio_get_input_status(nextdev,
RIO_GET_PORT_NUM(nextdev->swpinfo), NULL);
udelay(50);

- rio_read_config_32(rdev,
- rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(pnum),
- &err_status);
+ rio_read_config_32(rdev, RIO_DEV_PORT_N_ERR_STS_CSR(rdev, pnum),
+ &err_status);
pr_debug("RIO_EM: SP%d_ERR_STS_CSR=0x%08x\n", pnum, err_status);
}

- return (err_status & (RIO_PORT_N_ERR_STS_PW_OUT_ES |
- RIO_PORT_N_ERR_STS_PW_INP_ES)) ? 1 : 0;
+ return (err_status & (RIO_PORT_N_ERR_STS_OUT_ES |
+ RIO_PORT_N_ERR_STS_INP_ES)) ? 1 : 0;
}

/**
@@ -1257,9 +1267,8 @@ int rio_inb_pwrite_handler(struct rio_mport *mport, union rio_pw_msg *pw_msg)
if (rdev->rswitch->ops && rdev->rswitch->ops->em_handle)
rdev->rswitch->ops->em_handle(rdev, portnum);

- rio_read_config_32(rdev,
- rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(portnum),
- &err_status);
+ rio_read_config_32(rdev, RIO_DEV_PORT_N_ERR_STS_CSR(rdev, portnum),
+ &err_status);
pr_debug("RIO_PW: SP%d_ERR_STS_CSR=0x%08x\n", portnum, err_status);

if (err_status & RIO_PORT_N_ERR_STS_PORT_OK) {
@@ -1276,8 +1285,8 @@ int rio_inb_pwrite_handler(struct rio_mport *mport, union rio_pw_msg *pw_msg)
* Depending on the link partner state, two attempts
* may be needed for successful recovery.
*/
- if (err_status & (RIO_PORT_N_ERR_STS_PW_OUT_ES |
- RIO_PORT_N_ERR_STS_PW_INP_ES)) {
+ if (err_status & (RIO_PORT_N_ERR_STS_OUT_ES |
+ RIO_PORT_N_ERR_STS_INP_ES)) {
if (rio_clr_err_stopped(rdev, portnum, err_status))
rio_clr_err_stopped(rdev, portnum, 0);
}
@@ -1287,10 +1296,18 @@ int rio_inb_pwrite_handler(struct rio_mport *mport, union rio_pw_msg *pw_msg)
rdev->rswitch->port_ok &= ~(1 << portnum);
rio_set_port_lockout(rdev, portnum, 1);

+ if (rdev->phys_rmap == 1) {
rio_write_config_32(rdev,
- rdev->phys_efptr +
- RIO_PORT_N_ACK_STS_CSR(portnum),
+ RIO_DEV_PORT_N_ACK_STS_CSR(rdev, portnum),
RIO_PORT_N_ACK_CLEAR);
+ } else {
+ rio_write_config_32(rdev,
+ RIO_DEV_PORT_N_OB_ACK_CSR(rdev, portnum),
+ RIO_PORT_N_OB_ACK_CLEAR);
+ rio_write_config_32(rdev,
+ RIO_DEV_PORT_N_IB_ACK_CSR(rdev, portnum),
+ 0);
+ }

/* Schedule Extraction Service */
pr_debug("RIO_PW: Device Extraction on [%s]-P%d\n",
@@ -1319,9 +1336,8 @@ int rio_inb_pwrite_handler(struct rio_mport *mport, union rio_pw_msg *pw_msg)
}

/* Clear remaining error bits and Port-Write Pending bit */
- rio_write_config_32(rdev,
- rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(portnum),
- err_status);
+ rio_write_config_32(rdev, RIO_DEV_PORT_N_ERR_STS_CSR(rdev, portnum),
+ err_status);

return 0;
}
@@ -1372,20 +1388,7 @@ EXPORT_SYMBOL_GPL(rio_mport_get_efb);
* Tell if a device supports a given RapidIO capability.
* Returns the offset of the requested extended feature
* block within the device's RIO configuration space or
- * 0 in case the device does not support it. Possible
- * values for @ftr:
- *
- * %RIO_EFB_PAR_EP_ID LP/LVDS EP Devices
- *
- * %RIO_EFB_PAR_EP_REC_ID LP/LVDS EP Recovery Devices
- *
- * %RIO_EFB_PAR_EP_FREE_ID LP/LVDS EP Free Devices
- *
- * %RIO_EFB_SER_EP_ID LP/Serial EP Devices
- *
- * %RIO_EFB_SER_EP_REC_ID LP/Serial EP Recovery Devices
- *
- * %RIO_EFB_SER_EP_FREE_ID LP/Serial EP Free Devices
+ * 0 in case the device does not support it.
*/
u32
rio_mport_get_feature(struct rio_mport * port, int local, u16 destid,
diff --git a/drivers/rapidio/rio.h b/drivers/rapidio/rio.h
index 625d09a..9796b3f 100644
--- a/drivers/rapidio/rio.h
+++ b/drivers/rapidio/rio.h
@@ -22,7 +22,7 @@
extern u32 rio_mport_get_feature(struct rio_mport *mport, int local, u16 destid,
u8 hopcount, int ftr);
extern u32 rio_mport_get_physefb(struct rio_mport *port, int local,
- u16 destid, u8 hopcount);
+ u16 destid, u8 hopcount, u32 *rmap);
extern u32 rio_mport_get_efb(struct rio_mport *port, int local, u16 destid,
u8 hopcount, u32 from);
extern int rio_mport_chk_dev_access(struct rio_mport *mport, u16 destid,
diff --git a/drivers/rapidio/switches/tsi57x.c b/drivers/rapidio/switches/tsi57x.c
index 42c8b01..2700d15 100644
--- a/drivers/rapidio/switches/tsi57x.c
+++ b/drivers/rapidio/switches/tsi57x.c
@@ -175,12 +175,10 @@ tsi57x_em_init(struct rio_dev *rdev)

/* Clear all pending interrupts */
rio_read_config_32(rdev,
- rdev->phys_efptr +
- RIO_PORT_N_ERR_STS_CSR(portnum),
+ RIO_DEV_PORT_N_ERR_STS_CSR(rdev, portnum),
&regval);
rio_write_config_32(rdev,
- rdev->phys_efptr +
- RIO_PORT_N_ERR_STS_CSR(portnum),
+ RIO_DEV_PORT_N_ERR_STS_CSR(rdev, portnum),
regval & 0x07120214);

rio_read_config_32(rdev,
@@ -198,7 +196,7 @@ tsi57x_em_init(struct rio_dev *rdev)

/* Skip next (odd) port if the current port is in x4 mode */
rio_read_config_32(rdev,
- rdev->phys_efptr + RIO_PORT_N_CTL_CSR(portnum),
+ RIO_DEV_PORT_N_CTL_CSR(rdev, portnum),
&regval);
if ((regval & RIO_PORT_N_CTL_PWIDTH) == RIO_PORT_N_CTL_PWIDTH_4)
portnum++;
@@ -221,23 +219,23 @@ tsi57x_em_handler(struct rio_dev *rdev, u8 portnum)
u32 regval;

rio_read_config_32(rdev,
- rdev->phys_efptr + RIO_PORT_N_ERR_STS_CSR(portnum),
+ RIO_DEV_PORT_N_ERR_STS_CSR(rdev, portnum),
&err_status);

if ((err_status & RIO_PORT_N_ERR_STS_PORT_OK) &&
- (err_status & (RIO_PORT_N_ERR_STS_PW_OUT_ES |
- RIO_PORT_N_ERR_STS_PW_INP_ES))) {
+ (err_status & (RIO_PORT_N_ERR_STS_OUT_ES |
+ RIO_PORT_N_ERR_STS_INP_ES))) {
/* Remove any queued packets by locking/unlocking port */
rio_read_config_32(rdev,
- rdev->phys_efptr + RIO_PORT_N_CTL_CSR(portnum),
+ RIO_DEV_PORT_N_CTL_CSR(rdev, portnum),
&regval);
if (!(regval & RIO_PORT_N_CTL_LOCKOUT)) {
rio_write_config_32(rdev,
- rdev->phys_efptr + RIO_PORT_N_CTL_CSR(portnum),
+ RIO_DEV_PORT_N_CTL_CSR(rdev, portnum),
regval | RIO_PORT_N_CTL_LOCKOUT);
udelay(50);
rio_write_config_32(rdev,
- rdev->phys_efptr + RIO_PORT_N_CTL_CSR(portnum),
+ RIO_DEV_PORT_N_CTL_CSR(rdev, portnum),
regval);
}

@@ -245,7 +243,7 @@ tsi57x_em_handler(struct rio_dev *rdev, u8 portnum)
* valid bit
*/
rio_read_config_32(rdev,
- rdev->phys_efptr + RIO_PORT_N_MNT_RSP_CSR(portnum),
+ RIO_DEV_PORT_N_MNT_RSP_CSR(rdev, portnum),
&regval);

/* Send a Packet-Not-Accepted/Link-Request-Input-Status control
@@ -259,8 +257,8 @@ tsi57x_em_handler(struct rio_dev *rdev, u8 portnum)
while (checkcount--) {
udelay(50);
rio_read_config_32(rdev,
- rdev->phys_efptr +
- RIO_PORT_N_MNT_RSP_CSR(portnum),
+ RIO_DEV_PORT_N_MNT_RSP_CSR(rdev,
+ portnum),
&regval);
if (regval & RIO_PORT_N_MNT_RSP_RVAL)
goto exit_es;
diff --git a/include/linux/rio.h b/include/linux/rio.h
index f7ec35b..37b95c4 100644
--- a/include/linux/rio.h
+++ b/include/linux/rio.h
@@ -163,6 +163,7 @@ enum rio_device_state {
* @dst_ops: Destination operation capabilities
* @comp_tag: RIO component tag
* @phys_efptr: RIO device extended features pointer
+ * @phys_rmap: LP-Serial Register Map Type (1 or 2)
* @em_efptr: RIO Error Management features pointer
* @dma_mask: Mask of bits of RIO address this device implements
* @driver: Driver claiming this device
@@ -193,6 +194,7 @@ struct rio_dev {
u32 dst_ops;
u32 comp_tag;
u32 phys_efptr;
+ u32 phys_rmap;
u32 em_efptr;
u64 dma_mask;
struct rio_driver *driver; /* RIO driver claiming this device */
@@ -237,11 +239,6 @@ struct rio_dbell {
void *dev_id;
};

-enum rio_phy_type {
- RIO_PHY_PARALLEL,
- RIO_PHY_SERIAL,
-};
-
/**
* struct rio_mport - RIO master port info
* @dbells: List of doorbell events
@@ -259,8 +256,8 @@ enum rio_phy_type {
* @id: Port ID, unique among all ports
* @index: Port index, unique among all port interfaces of the same type
* @sys_size: RapidIO common transport system size
- * @phy_type: RapidIO phy type
* @phys_efptr: RIO port extended features pointer
+ * @phys_rmap: LP-Serial EFB Register Mapping type (1 or 2).
* @name: Port name string
* @dev: device structure associated with an mport
* @priv: Master port private data
@@ -289,8 +286,8 @@ struct rio_mport {
* 0 - Small size. 256 devices.
* 1 - Large size, 65536 devices.
*/
- enum rio_phy_type phy_type; /* RapidIO phy type */
u32 phys_efptr;
+ u32 phys_rmap;
unsigned char name[RIO_MAX_MPORT_NAME];
struct device dev;
void *priv; /* Master port private data */
diff --git a/include/linux/rio_regs.h b/include/linux/rio_regs.h
index 1063ae3..40c04ef 100644
--- a/include/linux/rio_regs.h
+++ b/include/linux/rio_regs.h
@@ -42,9 +42,11 @@
#define RIO_PEF_INB_MBOX2 0x00200000 /* [II, <= 1.2] Mailbox 2 */
#define RIO_PEF_INB_MBOX3 0x00100000 /* [II, <= 1.2] Mailbox 3 */
#define RIO_PEF_INB_DOORBELL 0x00080000 /* [II, <= 1.2] Doorbells */
+#define RIO_PEF_DEV32 0x00001000 /* [III] PE supports Common TRansport Dev32 */
#define RIO_PEF_EXT_RT 0x00000200 /* [III, 1.3] Extended route table support */
#define RIO_PEF_STD_RT 0x00000100 /* [III, 1.3] Standard route table support */
-#define RIO_PEF_CTLS 0x00000010 /* [III] CTLS */
+#define RIO_PEF_CTLS 0x00000010 /* [III] Common Transport Large System (< rev.3) */
+#define RIO_PEF_DEV16 0x00000010 /* [III] PE Supports Common Transport Dev16 (rev.3) */
#define RIO_PEF_EXT_FEATURES 0x00000008 /* [I] EFT_PTR valid */
#define RIO_PEF_ADDR_66 0x00000004 /* [I] 66 bits */
#define RIO_PEF_ADDR_50 0x00000002 /* [I] 50 bits */
@@ -194,70 +196,101 @@
#define RIO_GET_BLOCK_ID(x) (x & RIO_EFB_ID_MASK)

/* Extended Feature Block IDs */
-#define RIO_EFB_PAR_EP_ID 0x0001 /* [IV] LP/LVDS EP Devices */
-#define RIO_EFB_PAR_EP_REC_ID 0x0002 /* [IV] LP/LVDS EP Recovery Devices */
-#define RIO_EFB_PAR_EP_FREE_ID 0x0003 /* [IV] LP/LVDS EP Free Devices */
-#define RIO_EFB_SER_EP_ID_V13P 0x0001 /* [VI] LP/Serial EP Devices, RapidIO Spec ver 1.3 and above */
-#define RIO_EFB_SER_EP_REC_ID_V13P 0x0002 /* [VI] LP/Serial EP Recovery Devices, RapidIO Spec ver 1.3 and above */
-#define RIO_EFB_SER_EP_FREE_ID_V13P 0x0003 /* [VI] LP/Serial EP Free Devices, RapidIO Spec ver 1.3 and above */
-#define RIO_EFB_SER_EP_ID 0x0004 /* [VI] LP/Serial EP Devices */
-#define RIO_EFB_SER_EP_REC_ID 0x0005 /* [VI] LP/Serial EP Recovery Devices */
-#define RIO_EFB_SER_EP_FREE_ID 0x0006 /* [VI] LP/Serial EP Free Devices */
-#define RIO_EFB_SER_EP_FREC_ID 0x0009 /* [VI] LP/Serial EP Free Recovery Devices */
+#define RIO_EFB_SER_EP_M1_ID 0x0001 /* [VI] LP-Serial EP Devices, Map I */
+#define RIO_EFB_SER_EP_SW_M1_ID 0x0002 /* [VI] LP-Serial EP w SW Recovery Devices, Map I */
+#define RIO_EFB_SER_EPF_M1_ID 0x0003 /* [VI] LP-Serial EP Free Devices, Map I */
+#define RIO_EFB_SER_EP_ID 0x0004 /* [VI] LP-Serial EP Devices, RIO 1.2 */
+#define RIO_EFB_SER_EP_REC_ID 0x0005 /* [VI] LP-Serial EP w SW Recovery Devices, RIO 1.2 */
+#define RIO_EFB_SER_EP_FREE_ID 0x0006 /* [VI] LP-Serial EP Free Devices, RIO 1.2 */
#define RIO_EFB_ERR_MGMNT 0x0007 /* [VIII] Error Management Extensions */
+#define RIO_EFB_SER_EPF_SW_M1_ID 0x0009 /* [VI] LP-Serial EP Free w SW Recovery Devices, Map I */
+#define RIO_EFB_SW_ROUTING_TBL 0x000E /* [III] Switch Routing Table Block */
+#define RIO_EFB_SER_EP_M2_ID 0x0011 /* [VI] LP-Serial EP Devices, Map II */
+#define RIO_EFB_SER_EP_SW_M2_ID 0x0012 /* [VI] LP-Serial EP w SW Recovery Devices, Map II */
+#define RIO_EFB_SER_EPF_M2_ID 0x0013 /* [VI] LP-Serial EP Free Devices, Map II */
+#define RIO_EFB_ERR_MGMNT_HS 0x0017 /* [VIII] Error Management Extensions, Hot-Swap only */
+#define RIO_EFB_SER_EPF_SW_M2_ID 0x0019 /* [VI] LP-Serial EP Free w SW Recovery Devices, Map II */

/*
- * Physical 8/16 LP-LVDS
- * ID=0x0001, Generic End Point Devices
- * ID=0x0002, Generic End Point Devices, software assisted recovery option
- * ID=0x0003, Generic End Point Free Devices
- *
- * Physical LP-Serial
- * ID=0x0004, Generic End Point Devices
- * ID=0x0005, Generic End Point Devices, software assisted recovery option
- * ID=0x0006, Generic End Point Free Devices
+ * Physical LP-Serial Registers Definitions
+ * Parameters in register macros:
+ * n - port number, m - Register Map Type (1 or 2)
*/
#define RIO_PORT_MNT_HEADER 0x0000
#define RIO_PORT_REQ_CTL_CSR 0x0020
-#define RIO_PORT_RSP_CTL_CSR 0x0024 /* 0x0001/0x0002 */
-#define RIO_PORT_LINKTO_CTL_CSR 0x0020 /* Serial */
-#define RIO_PORT_RSPTO_CTL_CSR 0x0024 /* Serial */
+#define RIO_PORT_RSP_CTL_CSR 0x0024
+#define RIO_PORT_LINKTO_CTL_CSR 0x0020
+#define RIO_PORT_RSPTO_CTL_CSR 0x0024
#define RIO_PORT_GEN_CTL_CSR 0x003c
#define RIO_PORT_GEN_HOST 0x80000000
#define RIO_PORT_GEN_MASTER 0x40000000
#define RIO_PORT_GEN_DISCOVERED 0x20000000
-#define RIO_PORT_N_MNT_REQ_CSR(x) (0x0040 + x*0x20) /* 0x0002 */
+#define RIO_PORT_N_MNT_REQ_CSR(n, m) (0x40 + (n) * (0x20 * (m)))
#define RIO_MNT_REQ_CMD_RD 0x03 /* Reset-device command */
#define RIO_MNT_REQ_CMD_IS 0x04 /* Input-status command */
-#define RIO_PORT_N_MNT_RSP_CSR(x) (0x0044 + x*0x20) /* 0x0002 */
+#define RIO_PORT_N_MNT_RSP_CSR(n, m) (0x44 + (n) * (0x20 * (m)))
#define RIO_PORT_N_MNT_RSP_RVAL 0x80000000 /* Response Valid */
#define RIO_PORT_N_MNT_RSP_ASTAT 0x000007e0 /* ackID Status */
#define RIO_PORT_N_MNT_RSP_LSTAT 0x0000001f /* Link Status */
-#define RIO_PORT_N_ACK_STS_CSR(x) (0x0048 + x*0x20) /* 0x0002 */
+#define RIO_PORT_N_ACK_STS_CSR(n) (0x48 + (n) * 0x20) /* Only in RM-I */
#define RIO_PORT_N_ACK_CLEAR 0x80000000
#define RIO_PORT_N_ACK_INBOUND 0x3f000000
#define RIO_PORT_N_ACK_OUTSTAND 0x00003f00
#define RIO_PORT_N_ACK_OUTBOUND 0x0000003f
-#define RIO_PORT_N_CTL2_CSR(x) (0x0054 + x*0x20)
+#define RIO_PORT_N_CTL2_CSR(n, m) (0x54 + (n) * (0x20 * (m)))
#define RIO_PORT_N_CTL2_SEL_BAUD 0xf0000000
-#define RIO_PORT_N_ERR_STS_CSR(x) (0x0058 + x*0x20)
-#define RIO_PORT_N_ERR_STS_PW_OUT_ES 0x00010000 /* Output Error-stopped */
-#define RIO_PORT_N_ERR_STS_PW_INP_ES 0x00000100 /* Input Error-stopped */
+#define RIO_PORT_N_ERR_STS_CSR(n, m) (0x58 + (n) * (0x20 * (m)))
+#define RIO_PORT_N_ERR_STS_OUT_ES 0x00010000 /* Output Error-stopped */
+#define RIO_PORT_N_ERR_STS_INP_ES 0x00000100 /* Input Error-stopped */
#define RIO_PORT_N_ERR_STS_PW_PEND 0x00000010 /* Port-Write Pending */
+#define RIO_PORT_N_ERR_STS_PORT_UA 0x00000008 /* Port Unavailable */
#define RIO_PORT_N_ERR_STS_PORT_ERR 0x00000004
#define RIO_PORT_N_ERR_STS_PORT_OK 0x00000002
#define RIO_PORT_N_ERR_STS_PORT_UNINIT 0x00000001
-#define RIO_PORT_N_CTL_CSR(x) (0x005c + x*0x20)
+#define RIO_PORT_N_CTL_CSR(n, m) (0x5c + (n) * (0x20 * (m)))
#define RIO_PORT_N_CTL_PWIDTH 0xc0000000
#define RIO_PORT_N_CTL_PWIDTH_1 0x00000000
#define RIO_PORT_N_CTL_PWIDTH_4 0x40000000
#define RIO_PORT_N_CTL_IPW 0x38000000 /* Initialized Port Width */
#define RIO_PORT_N_CTL_P_TYP_SER 0x00000001
#define RIO_PORT_N_CTL_LOCKOUT 0x00000002
-#define RIO_PORT_N_CTL_EN_RX_SER 0x00200000
-#define RIO_PORT_N_CTL_EN_TX_SER 0x00400000
-#define RIO_PORT_N_CTL_EN_RX_PAR 0x08000000
-#define RIO_PORT_N_CTL_EN_TX_PAR 0x40000000
+#define RIO_PORT_N_CTL_EN_RX 0x00200000
+#define RIO_PORT_N_CTL_EN_TX 0x00400000
+#define RIO_PORT_N_OB_ACK_CSR(n) (0x60 + (n) * 0x40) /* Only in RM-II */
+#define RIO_PORT_N_OB_ACK_CLEAR 0x80000000
+#define RIO_PORT_N_OB_ACK_OUTSTD 0x00fff000
+#define RIO_PORT_N_OB_ACK_OUTBND 0x00000fff
+#define RIO_PORT_N_IB_ACK_CSR(n) (0x64 + (n) * 0x40) /* Only in RM-II */
+#define RIO_PORT_N_IB_ACK_INBND 0x00000fff
+
+/*
+ * Device-based helper macros for serial port register access.
+ * d - pointer to rapidio device object, n - port number
+ */
+
+#define RIO_DEV_PORT_N_MNT_REQ_CSR(d, n) \
+ (d->phys_efptr + RIO_PORT_N_MNT_REQ_CSR(n, d->phys_rmap))
+
+#define RIO_DEV_PORT_N_MNT_RSP_CSR(d, n) \
+ (d->phys_efptr + RIO_PORT_N_MNT_RSP_CSR(n, d->phys_rmap))
+
+#define RIO_DEV_PORT_N_ACK_STS_CSR(d, n) \
+ (d->phys_efptr + RIO_PORT_N_ACK_STS_CSR(n))
+
+#define RIO_DEV_PORT_N_CTL2_CSR(d, n) \
+ (d->phys_efptr + RIO_PORT_N_CTL2_CSR(n, d->phys_rmap))
+
+#define RIO_DEV_PORT_N_ERR_STS_CSR(d, n) \
+ (d->phys_efptr + RIO_PORT_N_ERR_STS_CSR(n, d->phys_rmap))
+
+#define RIO_DEV_PORT_N_CTL_CSR(d, n) \
+ (d->phys_efptr + RIO_PORT_N_CTL_CSR(n, d->phys_rmap))
+
+#define RIO_DEV_PORT_N_OB_ACK_CSR(d, n) \
+ (d->phys_efptr + RIO_PORT_N_OB_ACK_CSR(n))
+
+#define RIO_DEV_PORT_N_IB_ACK_CSR(d, n) \
+ (d->phys_efptr + RIO_PORT_N_IB_ACK_CSR(n))

/*
* Error Management Extensions (RapidIO 1.3+, Part 8)
@@ -268,6 +301,7 @@
/* General EM Registers (Common for all Ports) */

#define RIO_EM_EFB_HEADER 0x000 /* Error Management Extensions Block Header */
+#define RIO_EM_EMHS_CAR 0x004 /* EM Functionality CAR */
#define RIO_EM_LTL_ERR_DETECT 0x008 /* Logical/Transport Layer Error Detect CSR */
#define RIO_EM_LTL_ERR_EN 0x00c /* Logical/Transport Layer Error Enable CSR */
#define REM_LTL_ERR_ILLTRAN 0x08000000 /* Illegal Transaction decode */
@@ -278,15 +312,33 @@
#define RIO_EM_LTL_ADDR_CAP 0x014 /* Logical/Transport Layer Address Capture CSR */
#define RIO_EM_LTL_DEVID_CAP 0x018 /* Logical/Transport Layer Device ID Capture CSR */
#define RIO_EM_LTL_CTRL_CAP 0x01c /* Logical/Transport Layer Control Capture CSR */
+#define RIO_EM_LTL_DID32_CAP 0x020 /* Logical/Transport Layer Dev32 DestID Capture CSR */
+#define RIO_EM_LTL_SID32_CAP 0x024 /* Logical/Transport Layer Dev32 source ID Capture CSR */
#define RIO_EM_PW_TGT_DEVID 0x028 /* Port-write Target deviceID CSR */
+#define RIO_EM_PW_TGT_DEVID_D16M 0xff000000 /* Port-write Target DID16 MSB */
+#define RIO_EM_PW_TGT_DEVID_D8 0x00ff0000 /* Port-write Target DID16 LSB or DID8 */
+#define RIO_EM_PW_TGT_DEVID_DEV16 0x00008000 /* Port-write Target DID16 LSB or DID8 */
+#define RIO_EM_PW_TGT_DEVID_DEV32 0x00004000 /* Port-write Target DID16 LSB or DID8 */
#define RIO_EM_PKT_TTL 0x02c /* Packet Time-to-live CSR */
+#define RIO_EM_PKT_TTL_VAL 0xffff0000 /* Packet Time-to-live value */
+#define RIO_EM_PW_TGT32_DEVID 0x030 /* Port-write Dev32 Target deviceID CSR */
+#define RIO_EM_PW_TX_CTRL 0x034 /* Port-write Transmission Control CSR */
+#define RIO_EM_PW_TX_CTRL_PW_DIS 0x00000001 /* Port-write Transmission Disable bit */

/* Per-Port EM Registers */

#define RIO_EM_PN_ERR_DETECT(x) (0x040 + x*0x40) /* Port N Error Detect CSR */
#define REM_PED_IMPL_SPEC 0x80000000
+#define REM_PED_LINK_OK2U 0x40000000 /* Link OK to Uninit transition */
+#define REM_PED_LINK_UPDA 0x20000000 /* Link Uninit Packet Discard Active */
+#define REM_PED_LINK_U2OK 0x10000000 /* Link Uninit to OK transition */
#define REM_PED_LINK_TO 0x00000001
+
#define RIO_EM_PN_ERRRATE_EN(x) (0x044 + x*0x40) /* Port N Error Rate Enable CSR */
+#define RIO_EM_PN_ERRRATE_EN_OK2U 0x40000000 /* Enable notification for OK2U */
+#define RIO_EM_PN_ERRRATE_EN_UPDA 0x20000000 /* Enable notification for UPDA */
+#define RIO_EM_PN_ERRRATE_EN_U2OK 0x10000000 /* Enable notification for U2OK */
+
#define RIO_EM_PN_ATTRIB_CAP(x) (0x048 + x*0x40) /* Port N Attributes Capture CSR */
#define RIO_EM_PN_PKT_CAP_0(x) (0x04c + x*0x40) /* Port N Packet/Control Symbol Capture 0 CSR */
#define RIO_EM_PN_PKT_CAP_1(x) (0x050 + x*0x40) /* Port N Packet Capture 1 CSR */
@@ -294,5 +346,50 @@
#define RIO_EM_PN_PKT_CAP_3(x) (0x058 + x*0x40) /* Port N Packet Capture 3 CSR */
#define RIO_EM_PN_ERRRATE(x) (0x068 + x*0x40) /* Port N Error Rate CSR */
#define RIO_EM_PN_ERRRATE_TR(x) (0x06c + x*0x40) /* Port N Error Rate Threshold CSR */
+#define RIO_EM_PN_LINK_UDT(x) (0x070 + x*0x40) /* Port N Link Uninit Discard Timer CSR */
+#define RIO_EM_PN_LINK_UDT_TO 0xffffff00 /* Link Uninit Timeout value */
+
+/*
+ * Switch Routing Table Register Block ID=0x000E (RapidIO 3.0+, part 3)
+ * Register offsets are defined from beginning of the block.
+ */
+
+/* Broadcast Routing Table Control CSR */
+#define RIO_BC_RT_CTL_CSR 0x020
+#define RIO_RT_CTL_THREE_LVL 0x80000000
+#define RIO_RT_CTL_DEV32_RT_CTRL 0x40000000
+#define RIO_RT_CTL_MC_MASK_SZ 0x03000000 /* 3.0+ Part 11: Multicast */
+
+/* Broadcast Level 0 Info CSR */
+#define RIO_BC_RT_LVL0_INFO_CSR 0x030
+#define RIO_RT_L0I_NUM_GR 0xff000000
+#define RIO_RT_L0I_GR_PTR 0x00fffc00
+
+/* Broadcast Level 1 Info CSR */
+#define RIO_BC_RT_LVL1_INFO_CSR 0x034
+#define RIO_RT_L1I_NUM_GR 0xff000000
+#define RIO_RT_L1I_GR_PTR 0x00fffc00
+
+/* Broadcast Level 2 Info CSR */
+#define RIO_BC_RT_LVL2_INFO_CSR 0x038
+#define RIO_RT_L2I_NUM_GR 0xff000000
+#define RIO_RT_L2I_GR_PTR 0x00fffc00
+
+/* Per-Port Routing Table registers.
+ * Register fields defined in the broadcast section above are
+ * applicable to the corresponding registers below.
+ */
+#define RIO_SPx_RT_CTL_CSR(x) (0x040 + (0x20 * x))
+#define RIO_SPx_RT_LVL0_INFO_CSR(x) (0x50 + (0x20 * x))
+#define RIO_SPx_RT_LVL1_INFO_CSR(x) (0x54 + (0x20 * x))
+#define RIO_SPx_RT_LVL2_INFO_CSR(x) (0x58 + (0x20 * x))
+
+/* Register Formats for Routing Table Group entry.
+ * Register offsets are calculated using GR_PTR field in the corresponding
+ * table Level_N and group/entry numbers (see RapidIO 3.0+ Part 3).
+ */
+#define RIO_RT_Ln_ENTRY_IMPL_DEF 0xf0000000
+#define RIO_RT_Ln_ENTRY_RTE_VAL 0x000003ff
+#define RIO_RT_ENTRY_DROP_PKT 0x300

#endif /* LINUX_RIO_REGS_H */
--
1.7.8.4
\
 
 \ /
  Last update: 2016-07-21 21:01    [W:0.116 / U:1.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site