lkml.org 
[lkml]   [2016]   [Jul]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v3 3/6] binding-doc: usb: usb-device: add optional properties for power sequence
    Date
    Add optional properties for power sequence.

    Signed-off-by: Peter Chen <peter.chen@nxp.com>
    ---
    Documentation/devicetree/bindings/usb/usb-device.txt | 10 +++++++++-
    1 file changed, 9 insertions(+), 1 deletion(-)

    diff --git a/Documentation/devicetree/bindings/usb/usb-device.txt b/Documentation/devicetree/bindings/usb/usb-device.txt
    index 1c35e7b..3661dd2 100644
    --- a/Documentation/devicetree/bindings/usb/usb-device.txt
    +++ b/Documentation/devicetree/bindings/usb/usb-device.txt
    @@ -13,6 +13,10 @@ Required properties:
    - reg: the port number which this device is connecting to, the range
    is 1-31.

    +Optional properties:
    +power sequence properties, see
    +Documentation/devicetree/bindings/power/pwrseq/pwrseq-generic.txt for detail
    +
    Example:

    &usb1 {
    @@ -21,8 +25,12 @@ Example:
    #address-cells = <1>;
    #size-cells = <0>;

    - hub: genesys@1 {
    + genesys: hub@1 {
    compatible = "usb5e3,608";
    reg = <1>;
    +
    + clocks = <&clks IMX6SX_CLK_CKO>;
    + reset-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; /* hub reset pin */
    + reset-duration-us = <10>;
    };
    }
    --
    1.9.1
    \
     
     \ /
      Last update: 2016-07-20 12:41    [W:2.505 / U:0.052 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site