lkml.org 
[lkml]   [2016]   [Jul]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCHv8] wlcore: spi: add wl18xx support
Date
> 
> > Add support for using with both wl12xx and wl18xx.
> >
> > - all wilink family needs special init command for entering wspi mode.
> > extra clock cycles should be sent after the spi init command while the
> > cs pin is high.
> > - Use inverted chip select for sending a dummy 4 bytes command that
> > completes the init stage.
> >
> > Signed-off-by: Eyal Reizer <eyalr@ti.com>
> > Acked-by: Rob Herring <robh@kernel.org>
> > ---
> > v1->v2:update device tree bindings configuration
> > v2->v3:revert from manual gpio manipulation. use inverted chip select
> instead
> > for sending the extra init cycle which, achieves the same hardware purpose.
> > update device tree bindings docucmentation accordingly
> > v3->v4: Remove redundant data form binding documentation and fix chip
> select
> > number mismatch in wl1271 example
> > v4->v5: Rebase on top of head of wireless-drivers-next
> > v5->v6: Add ACKs
> > v6->v7: Mail format issues
> > v7->v8: Remove redundant varaible from wlcore_probe_of
>
> I have already applied this patch, it's too late to send a new version.
> Now you need to send a new patch, on top of wireless-drivers-next, which
> removes the redundant variable.
>
Understood. Will submit shortly

Best Regards,
Eyal

\
 
 \ /
  Last update: 2016-07-20 09:41    [W:0.063 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site