lkml.org 
[lkml]   [2016]   [Jul]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] tpm: add driver for cr50 on SPI
On Tue, Jul 19, 2016 at 03:55:27PM +0300, Jarkko Sakkinen wrote:
> On Thu, Jul 14, 2016 at 08:44:44PM -0700, Andrey Pronin wrote:
> > On Thu, Jul 14, 2016 at 09:32:36PM -0600, Jason Gunthorpe wrote:
> > > On Thu, Jul 14, 2016 at 07:20:18PM -0700, Andrey Pronin wrote:
> > >
> > > > +static int cr50_spi_read16(struct tpm_tis_data *data, u32 addr, u16 *result)
> > > > +{
> > > > + int rc;
> > > > +
> > > > + rc = data->phy_ops->read_bytes(data, addr, sizeof(u16), (u8 *)result);
> > > > + if (!rc)
> > > > + *result = le16_to_cpu(*result);
> > > > + return rc;
> > > > +}
> > >
> > > I thought we had core support for this pattern?
> > >
> > > Christophe ?
> > >
> > > Please change this so this code isn't duplicated.
> > >
> > > Jason
> > >
> > Hmm, didn't see the support. Would be great if there is.
> > The pattern itself is copied from tpm_tis_spi as is.
> > read_bytes/write_bytes were de-dup'ed as they used a lot of common code
> > (even more for this driver than for tpm_tis_spi).
> > But as for _readNN/_writeNN, there're only three of these functions,
> > so it din't seem too bad.
>
> If there isn't, please add a separate commit before this that adds an
> inline function to tpm_tis_core.h.
>
tpm_tis_core.h currently has access functions defined like:
static inline int tpm_tis_read16(struct tpm_tis_data *data, u32 addr,
u16 *result)
{
return data->phy_ops->read16(data, addr, result);
}

And it's up to the drivers implementing phy_ops to do (or not)
byte-swapping as necessary before/after IO ops. For example,
tpm_tis.c in its phy_ops->read16 simply does ioread16(), while
tpm_tis_spi.c (and cr50_spi.c) does phy_ops->read_bytes()
followed by le16_to_cpu().

Still, I can create add'l inline functions:
static inline int tpm_tis_read_le16(struct tpm_tis_data *data,
u32 addr, u16 *result)
{
int rc;

rc = data->phy_ops->read_bytes(data, addr,
sizeof(u16), (u8 *)result);
if (!rc)
*result = le16_to_cpu(*result);
return rc;
}
and re-use them both in cr50_spi.c and tpm_tis_spi.c

The only two things that bother me with such approach are
(1) whatever names I pick for the new set of functions, they
will be similar to and thus might be confused with the
original tpm_tis_read/writeXX;
(2) these functions are phy-specific, so possibly it's better
to create tpm_tis_spi.h and put them there with proper
name prefixes. And then use in tpm_tis_spi and cr50_spi.

Any preferences on what I should better do?

Andrey

\
 
 \ /
  Last update: 2016-07-20 03:01    [W:0.130 / U:0.300 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site