lkml.org 
[lkml]   [2016]   [Jul]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v0 10/10] arm: orion5x: Configure Netgear WNR854T network port LEDs
Date
The default bootloader leaves the LEDs orange, and the 88E1121R driver
applies it's own inappropriate configuration. Configure as per manual,
i.e. orange = 100 / green = 1000 / blink = activity

Signed-off-by: Jamie Lentin <jm@lentin.co.uk>
---
arch/arm/boot/dts/orion5x-netgear-wnr854t.dts | 45 +++++++++++++++++++++++++++
1 file changed, 45 insertions(+)

diff --git a/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts b/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts
index a8e89d8..635b396 100644
--- a/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts
+++ b/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts
@@ -81,16 +81,19 @@
port@0 {
reg = <0>;
label = "lan3";
+ phy-handle = <&lan3phy>;
};

port@1 {
reg = <1>;
label = "lan4";
+ phy-handle = <&lan4phy>;
};

port@2 {
reg = <2>;
label = "wan";
+ phy-handle = <&wanphy>;
};

port@3 {
@@ -101,11 +104,13 @@
port@5 {
reg = <5>;
label = "lan1";
+ phy-handle = <&lan1phy>;
};

port@7 {
reg = <7>;
label = "lan2";
+ phy-handle = <&lan2phy>;
};
};
};
@@ -148,6 +153,46 @@

&mdio {
status = "okay";
+
+ lan3phy: ethernet-phy@0 {
+ /* Marvell 88E1121R (port 1) */
+ compatible = "ethernet-phy-id0141.0cb0",
+ "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ marvell,reg-init = <3 16 0 0x1777 3 17 0 0x15>;
+ };
+
+ lan4phy: ethernet-phy@1 {
+ /* Marvell 88E1121R (port 2) */
+ compatible = "ethernet-phy-id0141.0cb0",
+ "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ marvell,reg-init = <3 16 0 0x1777 3 17 0 0x15>;
+ };
+
+ wanphy: ethernet-phy@2 {
+ /* Marvell 88E1121R (port 1) */
+ compatible = "ethernet-phy-id0141.0cb0",
+ "ethernet-phy-ieee802.3-c22";
+ reg = <2>;
+ marvell,reg-init = <3 16 0 0x1777 3 17 0 0x15>;
+ };
+
+ lan1phy: ethernet-phy@5 {
+ /* Marvell 88E1112 */
+ compatible = "ethernet-phy-id0141.0cb0",
+ "ethernet-phy-ieee802.3-c22";
+ reg = <5>;
+ marvell,reg-init = <3 16 0 0x1777 3 17 0 0x15>;
+ };
+
+ lan2phy: ethernet-phy@7 {
+ /* Marvell 88E1112 */
+ compatible = "ethernet-phy-id0141.0cb0",
+ "ethernet-phy-ieee802.3-c22";
+ reg = <7>;
+ marvell,reg-init = <3 16 0 0x1777 3 17 0 0x15>;
+ };
};

&eth {
--
2.8.1
\
 
 \ /
  Last update: 2016-07-16 17:41    [W:0.459 / U:0.616 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site