lkml.org 
[lkml]   [2016]   [Jul]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 03/10] Documentation: dt: socfpga: Add Arria10 USB EDAC binding
Date
From: Thor Thayer <tthayer@opensource.altera.com>

Add the device tree bindings needed to support the Altera USB
FIFO buffer EDAC on the Arria10 chip.

Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
---
.../bindings/arm/altera/socfpga-eccmgr.txt | 15 +++++++++++++++
1 file changed, 15 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt
index ad8245b..3ffeb12 100644
--- a/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt
+++ b/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt
@@ -106,6 +106,14 @@ Required Properties:
- interrupts : Should be single bit error interrupt, then double bit error
interrupt, in this order.

+USB FIFO ECC
+Required Properties:
+- compatible : Should be "altr,socfpga-usb-ecc"
+- reg : Address and size for ECC block registers.
+- altr,ecc-parent : phandle to parent USB node.
+- interrupts : Should be single bit error interrupt, then double bit error
+ interrupt, in this order.
+
Example:

eccmgr: eccmgr@ffd06000 {
@@ -179,5 +187,12 @@ Example:
altr,ecc-parent = <&pdma>;
interrupts = <10 IRQ_TYPE_LEVEL_HIGH>,
<42 IRQ_TYPE_LEVEL_HIGH>;
+
+ usb0-ecc@ff8c8800 {
+ compatible = "altr,socfpga-usb-ecc";
+ reg = <0xff8c8800 0x400>;
+ altr,ecc-parent = <&usb0>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
+ <34 IRQ_TYPE_LEVEL_HIGH>;
};
};
--
1.7.9.5
\
 
 \ /
  Last update: 2016-07-14 19:01    [W:0.375 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site