lkml.org 
[lkml]   [2016]   [Jul]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] pwm: twl: Reliably disable TWL6030 PWMs
From
Date
On 03/29/16 21:55, Paul Kocialkowski wrote:
> The current TWL6030 code for the TWL PWM driver does not reliably disable the
> PWM output, as tested with LEDs. The previous commit to that driver introduced
> that regression.
>
> However, it does make sense to disable the PWM clock after resetting the PWM,
> but for some obscure reason, doing it all at once simply doesn't work.
>
> The TWL6030 datasheet mentions that PWMs have to be disabled in two distinct
> steps. However, clearing the clock enable bit in a second step (after issuing a
> reset first) does not work.
>
> The only approach that works is the one that was in place before the previous
> commit to the driver. It consists in enabling the PWM clock after issuing a
> reset. This is what TI kernel trees and production code seem to be using.
>
> However, adding an extra step to disable the PWM clock seems to work reliably,
> despite looking quite odd.

Unfortunately I don't have board to test, but based on the documentation and
your explanation, this is the correct way.
Thank you for debugging and fixing it!

Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>

>
> Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
> ---
> drivers/pwm/pwm-twl.c | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>
> diff --git a/drivers/pwm/pwm-twl.c b/drivers/pwm/pwm-twl.c
> index 04f7672..7a993b0 100644
> --- a/drivers/pwm/pwm-twl.c
> +++ b/drivers/pwm/pwm-twl.c
> @@ -269,6 +269,22 @@ static void twl6030_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
> goto out;
> }
>
> + val |= TWL6030_PWM_TOGGLE(pwm->hwpwm, TWL6030_PWMXEN);
> +
> + ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_TOGGLE3_REG);
> + if (ret < 0) {
> + dev_err(chip->dev, "%s: Failed to disable PWM\n", pwm->label);
> + goto out;
> + }
> +
> + val &= ~TWL6030_PWM_TOGGLE(pwm->hwpwm, TWL6030_PWMXEN);
> +
> + ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, val, TWL6030_TOGGLE3_REG);
> + if (ret < 0) {
> + dev_err(chip->dev, "%s: Failed to disable PWM\n", pwm->label);
> + goto out;
> + }
> +
> twl->twl6030_toggle3 = val;
> out:
> mutex_unlock(&twl->mutex);
>


--
Péter

\
 
 \ /
  Last update: 2016-07-12 16:01    [W:3.145 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site