lkml.org 
[lkml]   [2016]   [Jul]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v12 1/2] Documentation: DT: dma: Add Xilinx zynqmp dma device tree binding documentation
Date
Device-tree binding documentation for Xilinx zynqmp dma engine
used in Zynq UltraScale+ MPSoC.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Punnaiah Choudary Kalluri <punnaia@xilinx.com>
Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com>
---
Changes in v12:
- None.
Changes in v11:
- None.
Changes in v10:
- Added Rob Acked-by in the commit message.
Changs in v9:
- Removed include sg runtime configuration parameter
from the binding doc as suggested by Lars.
Changes in v8:
- Removed all the software runtime configuration parameters
from the binding doc as suggested by the Lars.
Changes in v7:
- None.
Changes in v6:
- Removed desc-axi-cache/dst-axi-cache/src-axi-cache properties
from the binding doc as it allow broken combinations when dma-coherent
is set as suggested by Rob.
- Fixed minor comments given by Rob related coding(lower case DT node name).
Changes in v5:
- Use dma-coherent flag for coherent transfers as suggested by rob.
- Removed unnecessary properties from binding doc as suggested by Rob.
Changes in v4:
- None
Changes in v3:
- None
Changes in v2:
- None.

.../devicetree/bindings/dma/xilinx/zynqmp_dma.txt | 27 ++++++++++++++++++++
1 files changed, 27 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/dma/xilinx/zynqmp_dma.txt

diff --git a/Documentation/devicetree/bindings/dma/xilinx/zynqmp_dma.txt b/Documentation/devicetree/bindings/dma/xilinx/zynqmp_dma.txt
new file mode 100644
index 0000000..a784cdd
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/xilinx/zynqmp_dma.txt
@@ -0,0 +1,27 @@
+Xilinx ZynqMP DMA engine, it does support memory to memory transfers,
+memory to device and device to memory transfers. It also has flow
+control and rate control support for slave/peripheral dma access.
+
+Required properties:
+- compatible : Should be "xlnx,zynqmp-dma-1.0"
+- reg : Memory map for gdma/adma module access.
+- interrupt-parent : Interrupt controller the interrupt is routed through
+- interrupts : Should contain DMA channel interrupt.
+- xlnx,bus-width : Axi buswidth in bits. Should contain 128 or 64
+- clock-names : List of input clocks "clk_main", "clk_apb"
+ (see clock bindings for details)
+
+Optional properties:
+- dma-coherent : Present if dma operations are coherent.
+
+Example:
+++++++++
+fpd_dma_chan1: dma@fd500000 {
+ compatible = "xlnx,zynqmp-dma-1.0";
+ reg = <0x0 0xFD500000 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 117 4>;
+ clock-names = "clk_main", "clk_apb";
+ xlnx,bus-width = <128>;
+ dma-coherent;
+};
--
1.7.1
\
 
 \ /
  Last update: 2016-07-01 14:21    [W:0.078 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site