lkml.org 
[lkml]   [2016]   [Jun]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 1/3] dt/bindings: display: Add DT bindings for Mali Display Processors.
Date
Add DT bindings documentation for the Mali Display Processor. The bindings
describe the Mali DP500, DP550 and DP650 processors from ARM Ltd.

Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>

Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
---
.../devicetree/bindings/display/arm,malidp.txt | 65 ++++++++++++++++++++++
1 file changed, 65 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/arm,malidp.txt

diff --git a/Documentation/devicetree/bindings/display/arm,malidp.txt b/Documentation/devicetree/bindings/display/arm,malidp.txt
new file mode 100644
index 0000000..2f78709
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/arm,malidp.txt
@@ -0,0 +1,65 @@
+ARM Mali-DP
+
+The following bindings apply to a family of Display Processors sold as
+licensable IP by ARM Ltd. The bindings describe the Mali DP500, DP550 and
+DP650 processors that offer multiple composition layers, support for
+rotation and scaling output.
+
+Required properties:
+ - compatible: should be one of
+ "arm,mali-dp500"
+ "arm,mali-dp550"
+ "arm,mali-dp650"
+ depending on the particular implementation present in the hardware
+ - reg: Physical base address and size of the block of registers used by
+ the processor.
+ - interrupts: Interrupt list, as defined in ../interrupt-controller/interrupts.txt,
+ interrupt client nodes.
+ - interrupt-names: name of the engine inside the processor that will
+ use the corresponding interrupt. Should be one of "DE" or "SE".
+ - clocks: A list of phandle + clock-specifier pairs, one for each entry
+ in 'clock-names'
+ - clock-names: A list of clock names. It should contain:
+ - "pclk": for the APB interface clock
+ - "aclk": for the AXI interface clock
+ - "mclk": for the main processor clock
+ - "pxlclk": for the pixel clock feeding the output PLL of the processor.
+ - arm,malidp-output-port-lines: Array of u8 values describing the number
+ of output lines per channel (R, G and B).
+
+Required sub-nodes:
+ - port: The Mali DP connection to an encoder input port. The connection
+ is modelled using the OF graph bindings specified in
+ Documentation/devicetree/bindings/graph.txt
+
+Optional properties:
+ - memory-region: phandle to a node describing memory (see
+ Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt)
+ to be used for the framebuffer; if not present, the framebuffer may
+ be located anywhere in memory.
+
+
+Example:
+
+/ {
+ ...
+
+ dp0: malidp@6f200000 {
+ compatible = "arm,mali-dp650";
+ reg = <0 0x6f200000 0 0x20000>;
+ memory-region = <&display_reserved>;
+ interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>,
+ <0 168 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "DE", "SE";
+ clocks = <&oscclk2>, <&fpgaosc0>, <&fpgaosc1>, <&fpgaosc1>;
+ clock-names = "pxlclk", "mclk", "aclk", "pclk";
+ arm,malidp-output-port-lines = /bits/ 8 <8 8 8>;
+ port {
+ dp0_output: endpoint {
+ remote-endpoint = <&tda998x_2_input>;
+ };
+ };
+ };
+
+ ...
+};
--
2.8.2
\
 
 \ /
  Last update: 2016-06-09 18:41    [W:0.064 / U:0.316 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site