lkml.org 
[lkml]   [2016]   [Jun]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v7] input: tablet: add Pegasus Notetaker tablet driver
From
Date
On Wed, 2016-06-01 at 14:55 +0200, Martin Kepplinger wrote:

> It's *really* fun to use as an input tablet though! So let's support this
> for everybody.

Nice job, but a few issues are left. I'll comment in the code.


> +static void pegasus_close(struct input_dev *dev)
> +{
> + struct pegasus *pegasus = input_get_drvdata(dev);
> + int autopm_error;
> +
> + autopm_error = usb_autopm_get_interface(pegasus->intf);

There is no need for this.

> + usb_kill_urb(pegasus->irq);
> + cancel_work_sync(&pegasus->init);
> +
> + if (!autopm_error)
> + usb_autopm_put_interface(pegasus->intf);
> +}
> +
> +static int pegasus_probe(struct usb_interface *intf,
> + const struct usb_device_id *id)
> +{
> + struct usb_device *dev = interface_to_usbdev(intf);
> + struct usb_endpoint_descriptor *endpoint;
> + struct pegasus *pegasus;
> + struct input_dev *input_dev;
> + int error;
> + int pipe, maxp;
> +
> + /* We control interface 0 */
> + if (intf->cur_altsetting->desc.bInterfaceNumber == 1)
> + return -ENODEV;
> +
> + /* Sanity check that the device has an endpoint */
> + if (intf->altsetting[0].desc.bNumEndpoints < 1) {
> + dev_err(&intf->dev, "Invalid number of endpoints\n");
> + return -EINVAL;
> + }
> + endpoint = &intf->cur_altsetting->endpoint[0].desc;
> +
> + pegasus = kzalloc(sizeof(*pegasus), GFP_KERNEL);
> + input_dev = input_allocate_device();
> + if (!pegasus || !input_dev) {
> + error = -ENOMEM;
> + goto err_free_mem;
> + }
> +
> + pegasus->usbdev = dev;
> + pegasus->dev = input_dev;
> + pegasus->intf = intf;
> +
> + pegasus->data = usb_alloc_coherent(dev, endpoint->wMaxPacketSize,
> + GFP_KERNEL, &pegasus->data_dma);
> + if (!pegasus->data) {
> + error = -ENOMEM;
> + goto err_free_mem;
> + }
> +
> + pegasus->irq = usb_alloc_urb(0, GFP_KERNEL);
> + if (!pegasus->irq) {
> + error = -ENOMEM;
> + goto err_free_dma;
> + }
> +
> + pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress);
> + maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe));
> + pegasus->data_len = maxp;
> +
> + usb_fill_int_urb(pegasus->irq, dev, pipe, pegasus->data, maxp,
> + pegasus_irq, pegasus, endpoint->bInterval);
> +
> + pegasus->irq->transfer_dma = pegasus->data_dma;
> + pegasus->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
> +
> + if (dev->manufacturer)
> + strlcpy(pegasus->name, dev->manufacturer,
> + sizeof(pegasus->name));
> +
> + if (dev->product) {
> + if (dev->manufacturer)
> + strlcat(pegasus->name, " ", sizeof(pegasus->name));
> + strlcat(pegasus->name, dev->product, sizeof(pegasus->name));
> + }
> +
> + if (!strlen(pegasus->name))
> + snprintf(pegasus->name, sizeof(pegasus->name),
> + "USB Pegasus Device %04x:%04x",
> + le16_to_cpu(dev->descriptor.idVendor),
> + le16_to_cpu(dev->descriptor.idProduct));
> +
> + usb_make_path(dev, pegasus->phys, sizeof(pegasus->phys));
> + strlcat(pegasus->phys, "/input0", sizeof(pegasus->phys));
> +
> + INIT_WORK(&pegasus->init, pegasus_init);
> +
> + usb_set_intfdata(intf, pegasus);
> +
> + input_dev->name = pegasus->name;
> + input_dev->phys = pegasus->phys;
> + usb_to_input_id(dev, &input_dev->id);
> + input_dev->dev.parent = &intf->dev;
> +
> + input_set_drvdata(input_dev, pegasus);
> +
> + input_dev->open = pegasus_open;
> + input_dev->close = pegasus_close;
> +
> + __set_bit(EV_ABS, input_dev->evbit);
> + __set_bit(EV_KEY, input_dev->evbit);
> +
> + __set_bit(ABS_X, input_dev->absbit);
> + __set_bit(ABS_Y, input_dev->absbit);
> +
> + __set_bit(BTN_TOUCH, input_dev->keybit);
> + __set_bit(BTN_RIGHT, input_dev->keybit);
> + __set_bit(BTN_TOOL_PEN, input_dev->keybit);
> +
> + __set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
> + __set_bit(INPUT_PROP_POINTER, input_dev->propbit);
> +
> + input_set_abs_params(input_dev, ABS_X, -1500, 1500, 8, 0);
> + input_set_abs_params(input_dev, ABS_Y, 1600, 3000, 8, 0);
> +
> + pegasus_set_mode(pegasus, PEN_MODE_XY, NOTETAKER_LED_MOUSE);

If you need to do this here. It is also needed in reset_resume()

> + error = input_register_device(pegasus->dev);
> + if (error)
> + goto err_free_urb;
> +
> + return 0;
> +
> +err_free_urb:
> + usb_free_urb(pegasus->irq);
> +err_free_dma:
> + usb_free_coherent(dev, pegasus->data_len,
> + pegasus->data, pegasus->data_dma);
> +err_free_mem:
> + input_free_device(input_dev);
> + kfree(pegasus);
> + usb_set_intfdata(intf, NULL);
> +
> + return error;
> +}
> +
> +static void pegasus_disconnect(struct usb_interface *intf)
> +{
> + struct pegasus *pegasus = usb_get_intfdata(intf);
> +
> + input_unregister_device(pegasus->dev);
> +
> + usb_free_urb(pegasus->irq);
> + usb_free_coherent(interface_to_usbdev(intf),
> + pegasus->data_len, pegasus->data,
> + pegasus->data_dma);
> + kfree(pegasus);
> + usb_set_intfdata(intf, NULL);
> +}
> +
> +static int pegasus_suspend(struct usb_interface *intf, pm_message_t message)
> +{
> + struct pegasus *pegasus = usb_get_intfdata(intf);
> +
> + mutex_lock(&pegasus->dev->mutex);
> + usb_kill_urb(pegasus->irq);

You must also stop the scheduled work.

> + mutex_unlock(&pegasus->dev->mutex);
> +
> + return 0;
> +}
> +
> +static int pegasus_resume(struct usb_interface *intf)
> +{
> + struct pegasus *pegasus = usb_get_intfdata(intf);
> + int retval = 0;
> +
> + mutex_lock(&pegasus->dev->mutex);
> + if (pegasus->dev->users && usb_submit_urb(pegasus->irq, GFP_NOIO) < 0)
> + retval = -EIO;
> + mutex_unlock(&pegasus->dev->mutex);
> +
> + return retval;
> +}
> +
> +static int pegasus_reset_resume(struct usb_interface *intf)
> +{

Either the mode must be set on fresh hardware, or this is unnecessary.

> + return pegasus_resume(intf);
> +}

HTH
Oliver


\
 
 \ /
  Last update: 2016-06-09 17:41    [W:0.501 / U:0.216 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site