lkml.org 
[lkml]   [2016]   [Jun]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 1/2] max8903: adds support for initiation via device tree.
Hi,

Thanks for your contribution. Few comments below:

On Thu, Jun 2, 2016 at 8:44 AM, <chris@lapa.com.au> wrote:
> From: Chris Lapa <chris@lapa.com.au>
>
> This commit also adds requesting gpio's via devm_gpio_request() to ensure
> the gpio is available for usage by the driver.
>
> Signed-off-by: Chris Lapa <chris@lapa.com.au>
> ---
> .../devicetree/bindings/power/max8903-charger.txt | 28 ++
> drivers/power/max8903_charger.c | 281 ++++++++++++++++-----
> 2 files changed, 250 insertions(+), 59 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/power/max8903-charger.txt

Please put the bindings documentation in separate, first patch.

>
> diff --git a/Documentation/devicetree/bindings/power/max8903-charger.txt b/Documentation/devicetree/bindings/power/max8903-charger.txt
> new file mode 100644
> index 0000000..7207731
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/max8903-charger.txt
> @@ -0,0 +1,28 @@
> +Maxim Semiconductor MAX8903 Battery Charger bindings
> +
> +Required properties:
> +- compatible: "max8903-charger" for MAX8903 Battery Charger

Needs a 'maxim,' prefix.

> +- dc_valid:
> + - dok: DC power OK pin
> +- usb_valid:
> + - uok: USB power OK pin

I don't understand the explanation of them - dok/uok. What do you want
to say here?

> +
> +Optional properties:
> +- cen: Charge enable pin
> +- chg: Charger status pin
> +- flt: Fault pin
> +- dcm: Current limit mode setting (DC or USB)
> +- usus: USB suspend pin

Each gpio should be suffixed with '-gpios' (see
Documentation/devicetree/bindings/gpio/gpio.txt).

> +
> +
> +Example:
> +
> + max8903-charger {
> + compatible = "max8903-charger";
> + dok = <&gpio2 3 GPIO_ACTIVE_LOW>;
> + flt = <&gpio2 2 GPIO_ACTIVE_LOW>;
> + chg = <&gpio3 15 GPIO_ACTIVE_LOW>;
> + cen = <&gpio2 5 GPIO_ACTIVE_LOW>;
> + dc_valid;
> + status = "okay";
> + };
> diff --git a/drivers/power/max8903_charger.c b/drivers/power/max8903_charger.c
> index 17876ca..1989c10 100644
> --- a/drivers/power/max8903_charger.c
> +++ b/drivers/power/max8903_charger.c
> @@ -23,13 +23,16 @@
> #include <linux/gpio.h>
> #include <linux/interrupt.h>
> #include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/of_gpio.h>
> #include <linux/slab.h>
> #include <linux/power_supply.h>
> #include <linux/platform_device.h>
> #include <linux/power/max8903_charger.h>
>
> struct max8903_data {
> - struct max8903_pdata pdata;
> + struct max8903_pdata *pdata;
> struct device *dev;
> struct power_supply *psy;
> struct power_supply_desc psy_desc;
> @@ -53,8 +56,8 @@ static int max8903_get_property(struct power_supply *psy,
> switch (psp) {
> case POWER_SUPPLY_PROP_STATUS:
> val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
> - if (data->pdata.chg) {
> - if (gpio_get_value(data->pdata.chg) == 0)
> + if (data->pdata->chg) {
> + if (gpio_get_value(data->pdata->chg) == 0)
> val->intval = POWER_SUPPLY_STATUS_CHARGING;
> else if (data->usb_in || data->ta_in)
> val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
> @@ -75,13 +78,14 @@ static int max8903_get_property(struct power_supply *psy,
> default:
> return -EINVAL;
> }
> +
> return 0;
> }
>
> static irqreturn_t max8903_dcin(int irq, void *_data)
> {
> struct max8903_data *data = _data;
> - struct max8903_pdata *pdata = &data->pdata;
> + struct max8903_pdata *pdata = data->pdata;
> bool ta_in;
> enum power_supply_type old_type;
>
> @@ -122,7 +126,7 @@ static irqreturn_t max8903_dcin(int irq, void *_data)
> static irqreturn_t max8903_usbin(int irq, void *_data)
> {
> struct max8903_data *data = _data;
> - struct max8903_pdata *pdata = &data->pdata;
> + struct max8903_pdata *pdata = data->pdata;
> bool usb_in;
> enum power_supply_type old_type;
>
> @@ -161,7 +165,7 @@ static irqreturn_t max8903_usbin(int irq, void *_data)
> static irqreturn_t max8903_fault(int irq, void *_data)
> {
> struct max8903_data *data = _data;
> - struct max8903_pdata *pdata = &data->pdata;
> + struct max8903_pdata *pdata = data->pdata;
> bool fault;
>
> fault = gpio_get_value(pdata->flt) ? false : true;
> @@ -179,34 +183,135 @@ static irqreturn_t max8903_fault(int irq, void *_data)
> return IRQ_HANDLED;
> }
>
> +static struct max8903_pdata *max8903_parse_dt_data(
> + struct device *dev)
> +{
> + struct device_node *of_node = dev->of_node;
> + struct max8903_pdata *pdata = NULL;
> +
> + if (!of_node) {
> + return pdata;
> + }

Run a scripts/checkpatch.pl. In general the {} are not needed for
single statements.

> +
> + pdata = devm_kzalloc(dev, sizeof(struct max8903_pdata),
> + GFP_KERNEL);
> + if (!pdata) {
> + return pdata;

ditto

> + }
> +
> + if (of_get_property(of_node, "dc_valid", NULL)) {
> + pdata->dc_valid = true;
> + }
> +
> + if (of_get_property(of_node, "usb_valid", NULL)) {
> + pdata->usb_valid = true;
> + }
> +
> + pdata->cen = of_get_named_gpio(of_node, "cen", 0);
> + if (!gpio_is_valid(pdata->cen)) {
> + pdata->cen = 0;
> + }
> +
> + pdata->chg = of_get_named_gpio(of_node, "chg", 0);
> + if (!gpio_is_valid(pdata->chg)) {
> + pdata->chg = 0;
> + }
> +
> + pdata->flt = of_get_named_gpio(of_node, "flt", 0);
> + if (!gpio_is_valid(pdata->flt)) {
> + pdata->flt = 0;
> + }
> +
> + pdata->usus = of_get_named_gpio(of_node, "usus", 0);
> + if (!gpio_is_valid(pdata->usus)) {
> + pdata->usus = 0;
> + }
> +
> + pdata->dcm = of_get_named_gpio(of_node, "dcm", 0);
> + if (!gpio_is_valid(pdata->dcm)) {
> + pdata->dcm = 0;
> + }
> +
> + pdata->dok = of_get_named_gpio(of_node, "dok", 0);
> + if (!gpio_is_valid(pdata->dok)) {
> + pdata->dok = 0;
> + }
> +
> + pdata->uok = of_get_named_gpio(of_node, "uok", 0);
> + if (!gpio_is_valid(pdata->uok)) {
> + pdata->uok = 0;
> + }
> +
> + return pdata;
> +}
> +
> static int max8903_probe(struct platform_device *pdev)
> {
> - struct max8903_data *data;
> + struct max8903_data *charger;
> struct device *dev = &pdev->dev;
> - struct max8903_pdata *pdata = pdev->dev.platform_data;
> struct power_supply_config psy_cfg = {};
> int ret = 0;
> int gpio;
> int ta_in = 0;
> int usb_in = 0;
>
> - data = devm_kzalloc(dev, sizeof(struct max8903_data), GFP_KERNEL);
> - if (data == NULL) {
> + charger = devm_kzalloc(dev, sizeof(struct max8903_data), GFP_KERNEL);
> + if (charger == NULL) {
> dev_err(dev, "Cannot allocate memory.\n");

In a separate patch - you can get rid of error message.

I didn't perform a thorough review. First fix some easy ones. :)

Best regards,
Krzysztof

\
 
 \ /
  Last update: 2016-06-09 13:21    [W:0.281 / U:0.468 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site