lkml.org 
[lkml]   [2016]   [Jun]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/3] mtd: nand: sunxi: Support ECC maximization
Date
Setup the maximum ECC config when NAND_ECC_MAXIMIZE is set.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
---
drivers/mtd/nand/sunxi_nand.c | 29 +++++++++++++++++++++++++++++
1 file changed, 29 insertions(+)

diff --git a/drivers/mtd/nand/sunxi_nand.c b/drivers/mtd/nand/sunxi_nand.c
index 8dfcb65..21dad0b 100644
--- a/drivers/mtd/nand/sunxi_nand.c
+++ b/drivers/mtd/nand/sunxi_nand.c
@@ -1814,6 +1814,35 @@ static int sunxi_nand_hw_common_ecc_ctrl_init(struct mtd_info *mtd,
if (!data)
return -ENOMEM;

+ if (ecc->options & NAND_ECC_MAXIMIZE) {
+ int bytes;
+
+ ecc->size = 1024;
+ nsectors = mtd->writesize / ecc->size;
+
+ /* Reserve 2 bytes for the BBM */
+ bytes = (mtd->oobsize - 2) / nsectors;
+
+ /* 4 non-ECC bytes are added before each ECC bytes section */
+ bytes -= 4;
+
+ /* and bytes has to be even. */
+ if (bytes % 2)
+ bytes--;
+
+ ecc->strength = bytes * 8 / fls(8 * ecc->size);
+
+ for (i = 0; i < ARRAY_SIZE(strengths); i++) {
+ if (strengths[i] > ecc->strength)
+ break;
+ }
+
+ if (!i)
+ ecc->strength = 0;
+ else
+ ecc->strength = strengths[i - 1];
+ }
+
if (ecc->size != 512 && ecc->size != 1024)
return -EINVAL;

--
2.7.4
\
 
 \ /
  Last update: 2016-06-08 17:21    [W:0.044 / U:0.696 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site