lkml.org 
[lkml]   [2016]   [Jun]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC PATCH 1/4] Documentation: mmc: add description for new caps
Date
Let's add some basic description for cap-no-sdio,
cap-no-sd and cap-no-mmc.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>

---

Documentation/devicetree/bindings/mmc/mmc.txt | 3 +++
1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt
index ecc007a..e16d42b 100644
--- a/Documentation/devicetree/bindings/mmc/mmc.txt
+++ b/Documentation/devicetree/bindings/mmc/mmc.txt
@@ -39,6 +39,9 @@ Optional properties:
- cap-power-off-card: powering off the card is safe
- cap-mmc-hw-reset: eMMC hardware reset is supported
- cap-sdio-irq: enable SDIO IRQ signalling on this interface
+- cap-no-sdio: skip sending sdio cmd during initialization
+- cap-no-sd: skip sending sd cmd during initialization
+- cap-no-mmc: skip sending mmc cmd during initialization
- full-pwr-cycle: full power cycle of the card is supported
- mmc-ddr-1_8v: eMMC high-speed DDR mode(1.8V I/O) is supported
- mmc-ddr-1_2v: eMMC high-speed DDR mode(1.2V I/O) is supported
--
2.3.7

\
 
 \ /
  Last update: 2016-06-08 10:41    [W:0.103 / U:0.208 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site