Messages in this thread Patch in this message | | | From | Chen-Yu Tsai <> | Subject | [PATCH] ARM: dts: sun8i-h3: sinovoip-bpi-m2-plus: Fix LED and switch labels | Date | Wed, 8 Jun 2016 15:36:26 +0800 |
| |
The switch is clearly labeled "power" on the board.
The LED is red, and is lit by default through an external pull up. Label it as "pwr" even though there is no explicit marking.
Signed-off-by: Chen-Yu Tsai <wens@csie.org> ---
Hi Maxime,
This patch fixes 2 copy paste errors in the bpi-m2+ dts that slipped through. Can you squash it into my original patch?
Thanks ChenYu
--- arch/arm/boot/dts/sun8i-h3-sinovoip-bpi-m2-plus.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/sun8i-h3-sinovoip-bpi-m2-plus.dts b/arch/arm/boot/dts/sun8i-h3-sinovoip-bpi-m2-plus.dts index 8a19b4b44f1f..8387c458d615 100644 --- a/arch/arm/boot/dts/sun8i-h3-sinovoip-bpi-m2-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-sinovoip-bpi-m2-plus.dts @@ -67,7 +67,7 @@ pinctrl-0 = <&pwr_led_bpi_m2p>; pwr_led { - label = "orangepi:green:pwr"; + label = "bpi-m2+:red:pwr"; gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */ default-state = "on"; }; @@ -79,7 +79,7 @@ pinctrl-0 = <&sw_r_bpi_m2p>; sw4 { - label = "sw4"; + label = "power"; linux,code = <BTN_0>; gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; }; -- 2.8.1
| |