lkml.org 
[lkml]   [2016]   [Jun]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[RFC PATCH v2 00/15] ACPI IORT ARM SMMU v3 support
Date
This RFC patch series is v2 of a previous posting:

https://lkml.org/lkml/2016/4/14/702

v1 -> v2:
- Rebased on top of dependencies series [1][2][3](v4.7-rc1)
- Removed IOMMU fwnode generalization
- Implemented ARM SMMU v3 ACPI probing instead of ARM SMMU v2
owing to patch series dependencies [1]
- Moved platform device creation logic to IORT code to
generalize its usage for ARM SMMU v1-v2-v3 components
- Removed reliance on ACPI early device probing
- Created IORT specific iommu_xlate() translation hook leaving
OF code unchanged according to v1 reviews

The ACPI IORT table provides information that allows instantiating
ARM SMMU devices and carrying out id mappings between components on
ARM based systems (devices, IOMMUs, interrupt controllers).

http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Remapping_Table.pdf

Building on basic IORT support, available through [2]:

this patchset enables ARM SMMU v3 support on ACPI systems.

Most of the code is aimed at building the required generic ACPI
infrastructure to create and enable IOMMU components and to bring
the IOMMU infrastructure for ACPI on par with DT, which is going to
make future ARM SMMU components easier to integrate.

PATCH (1-2) fix compile warning/errors in [2]

PATCH (3) rework ARM64 IOMMU bus notifier to attach dma_ops.

PATCH (4) provides IORT support for registering IOMMU components.

PATCH (5) adds IORT based look-up for named components.

PATCH (6) improve IORT identifiers mapping API to make it work across
all possible IORT components.

PATCH (7) provides an IORT function to detect existence of specific type
of IORT components.

PATCH (8) refactors the ARM SMMU v3 driver so that the init functions are
split in a way that groups together code that probes through DT
and code that carries out HW registers FW agnostic probing, in
preparation for adding the ACPI probing path.

PATCH (9) rework ARM SMMU v3 platform driver registration to make it work on
ACPI systems.

PATCH (10) creates the kernel infrastructure required to create ARM SMMU
platform devices for IORT nodes.

PATCH (11) Building on patch (10), it adds ARM SMMU v3 IORT IOMMU operations
to create and probe ARM SMMU v3 components.

PATCH (12) implements the of_dma_configure() API in ACPI world -
acpi_dma_configure() - and patches PCI and ACPI core code to start
making use of it.

PATCH (13) provides IORT infrastructure to carry out IOMMU configuration
for devices and hook it up to the previously introduced ACPI
DMA configure API.

PATCH (14) define a function to look-up platform devices through their
respective IORT nodes stored in platform_data. This patch is
somewhat controversial and is provided as an initial solution
to the problem pending further discussions.

PATCH (15) provides code to carry out ACPI IORT based device identifiers
translation for ARM SMMU v3 components.

This patchset is built on top and depends on these three patch series:

[1] R.Murphy "Generic DT bindings for PCI and ARM SMMU v3"
http://marc.info/?l=linux-arm-kernel&m=146497432413816&w=2

[2] T.Nowicki "Introduce ACPI world to ITS irqchip" v5
http://marc.info/?l=linux-acpi&m=146469369703684&w=2

[3] T.Nowicki "Support for ARM64 ACPI based PCI host controller" v8
http://marc.info/?l=linux-acpi&m=146462129816292&w=2

and is provided for early review/testing purposes here:

git://git.kernel.org/pub/scm/linux/kernel/git/lpieralisi/linux.git acpi/iort-smmu-v2

Tested on FVP models for ARM SMMU v3 probing path.

Lorenzo Pieralisi (15):
drivers: acpi: iort: fix struct pci_dev compiler warnings
drivers: irqchip: its: fix its_acpi_probe() prototype
arm64: mm: change IOMMU notifier action to attach DMA ops
drivers: acpi: iort: add support for IOMMU registration
drivers: acpi: iort: add support for named component look-up
drivers: acpi: iort: enhance device identifiers mappings
drivers: acpi: iort: add node match function
drivers: acpi: iort: add support for ARM SMMU platform devices
creation
drivers: iommu: arm-smmu-v3: split probe functions into DT/generic
portions
drivers: iommu: arm-smmu-v3: enable ACPI driver initialization
drivers: iommu: arm-smmu-v3: add IORT iommu configuration
drivers: acpi: implement acpi_dma_configure
drivers: acpi: iort: introduce iort_iommu_configure
drivers: acpi: iort: add function to retrieve IOMMU platform devices
drivers: iommu: arm-smmu-v3: allow ACPI based streamid translation

arch/arm64/mm/dma-mapping.c | 2 +-
drivers/acpi/glue.c | 4 +-
drivers/acpi/iort.c | 361 ++++++++++++++++++++++++++++++++++++++-
drivers/acpi/scan.c | 29 ++++
drivers/iommu/arm-smmu-v3.c | 235 ++++++++++++++++++++++---
drivers/irqchip/irq-gic-v3-its.c | 2 +-
drivers/pci/probe.c | 3 +-
include/acpi/acpi_bus.h | 2 +
include/linux/acpi.h | 5 +
include/linux/iort.h | 43 +++++
10 files changed, 652 insertions(+), 34 deletions(-)

--
2.6.4

\
 
 \ /
  Last update: 2016-06-07 16:01    [W:1.218 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site