lkml.org 
[lkml]   [2016]   [Jun]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH] dmaengine: dmatest: Add support for scatter-gather DMA mode
Date
Hi Vinod,

> >
> > +static unsigned int sg_sources = 1;
> > +module_param(sg_sources, uint, S_IRUGO | S_IWUSR);
> > +MODULE_PARM_DESC(sg_sources,
>
> sg_buffers rather?

Ok sure will fix...

>
> > + "Number of scatter gather buffers (default: 1)");
>
> blank line please

Ok

>
> > +static unsigned int dmatest = 1;
> > +module_param(dmatest, uint, S_IRUGO | S_IWUSR);
> > +MODULE_PARM_DESC(dmatest,
> > + "dmatest 0-memcpy 1-slave_sg (default: 1)");
>
> dmatest? What does this mean!

To differentiate b/w the memcpy and slave_sg transfers using this dmatest
Sysfs entry.

>
> > static unsigned int xor_sources = 3;
> > module_param(xor_sources, uint, S_IRUGO | S_IWUSR);
> > MODULE_PARM_DESC(xor_sources, @@ -431,6 +439,8 @@ static int
> > dmatest_func(void *data)
> > dev = chan->device;
> > if (thread->type == DMA_MEMCPY)
> > src_cnt = dst_cnt = 1;
> > + else if (thread->type == DMA_SG)
> > + src_cnt = dst_cnt = sg_sources;
> > else if (thread->type == DMA_XOR) {
> > /* force odd to ensure dst = src */
> > src_cnt = min_odd(params->xor_sources | 1, dev->max_xor);
> @@ -485,6
> > +495,8 @@ static int dmatest_func(void *data)
> > dma_addr_t *dsts;
> > unsigned int src_off, dst_off, len;
> > u8 align = 0;
> > + struct scatterlist tx_sg[src_cnt];
> > + struct scatterlist rx_sg[src_cnt];
> >
> > total_tests++;
> >
> > @@ -577,10 +589,21 @@ static int dmatest_func(void *data)
> > um->bidi_cnt++;
> > }
> >
> > + sg_init_table(tx_sg, src_cnt);
> > + sg_init_table(rx_sg, dst_cnt);
>
> why dst_cnt here wheras you used src_cnt to create the list!

dst_cnt is used in prep_dma_sg will use dst_cnt to created list for rx buffers
Will fix this in v2.

>
> > + for (i = 0; i < src_cnt; i++) {
> > + sg_dma_address(&rx_sg[i]) = srcs[i];
> > + sg_dma_address(&tx_sg[i]) = dsts[i] + dst_off;
> > + sg_dma_len(&tx_sg[i]) = len;
> > + sg_dma_len(&rx_sg[i]) = len;
> > + }
> > if (thread->type == DMA_MEMCPY)
> > tx = dev->device_prep_dma_memcpy(chan,
> > dsts[0] + dst_off,
> > srcs[0], len, flags);
> > + else if (thread->type == DMA_SG)
> > + tx = dev->device_prep_dma_sg(chan, tx_sg,
> > + dst_cnt, rx_sg, src_cnt, flags);
>
> again dst_cnt

Will fix in v2.

>
> > else if (thread->type == DMA_XOR)
> > tx = dev->device_prep_dma_xor(chan,
> > dsts[0] + dst_off,
> > @@ -748,6 +771,8 @@ static int dmatest_add_threads(struct dmatest_info
> > *info,
> >
> > if (type == DMA_MEMCPY)
> > op = "copy";
> > + else if (type == DMA_SG)
> > + op = "sg";
> > else if (type == DMA_XOR)
> > op = "xor";
> > else if (type == DMA_PQ)
> > @@ -802,8 +827,16 @@ static int dmatest_add_channel(struct dmatest_info
> *info,
> > INIT_LIST_HEAD(&dtc->threads);
> >
> > if (dma_has_cap(DMA_MEMCPY, dma_dev->cap_mask)) {
> > - cnt = dmatest_add_threads(info, dtc, DMA_MEMCPY);
> > - thread_count += cnt > 0 ? cnt : 0;
> > + if (dmatest == 0) {
> > + cnt = dmatest_add_threads(info, dtc, DMA_MEMCPY);
> > + thread_count += cnt > 0 ? cnt : 0;
> > + }
> > + }
>
> blank line

Ok sure will fix in v2...

Thanks,
Kedar.

>
> --
> ~Vinod

\
 
 \ /
  Last update: 2016-06-07 08:21    [W:0.061 / U:0.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site