lkml.org 
[lkml]   [2016]   [Jun]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 5/5] mfd: rn5t618: register restart handler
Date
Use the PMIC's repower capability for reboots. Register a restart
handler with use a default priority of 128.

Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
---
drivers/mfd/rn5t618.c | 40 ++++++++++++++++++++++++++++++++++------
1 file changed, 34 insertions(+), 6 deletions(-)

diff --git a/drivers/mfd/rn5t618.c b/drivers/mfd/rn5t618.c
index d9b4d40..6bc0863 100644
--- a/drivers/mfd/rn5t618.c
+++ b/drivers/mfd/rn5t618.c
@@ -12,11 +12,13 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/

+#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/mfd/core.h>
#include <linux/mfd/rn5t618.h>
#include <linux/module.h>
#include <linux/of_device.h>
+#include <linux/reboot.h>
#include <linux/regmap.h>

static const struct mfd_cell rn5t618_cells[] = {
@@ -50,17 +52,34 @@ static const struct regmap_config rn5t618_regmap_config = {
};

static struct rn5t618 *rn5t618_pm_power_off;
+static struct notifier_block rn5t618_restart_handler;

-static void rn5t618_power_off(void)
+static void rn5t618_trigger_poweroff_sequence(bool repower)
{
/* disable automatic repower-on */
regmap_update_bits(rn5t618_pm_power_off->regmap, RN5T618_REPCNT,
- RN5T618_REPCNT_REPWRON, 0);
+ RN5T618_REPCNT_REPWRON, repower);
/* start power-off sequence */
regmap_update_bits(rn5t618_pm_power_off->regmap, RN5T618_SLPCNT,
RN5T618_SLPCNT_SWPWROFF, RN5T618_SLPCNT_SWPWROFF);
}

+static void rn5t618_power_off(void)
+{
+ rn5t618_trigger_poweroff_sequence(false);
+}
+
+static int rn5t618_restart(struct notifier_block *this,
+ unsigned long mode, void *cmd)
+{
+ rn5t618_trigger_poweroff_sequence(true);
+
+ mdelay(10);
+
+ return NOTIFY_DONE;
+}
+
+
static const struct of_device_id rn5t618_of_match[] = {
{ .compatible = "ricoh,rn5t567", .data = (void *)RN5T567 },
{ .compatible = "ricoh,rn5t618", .data = (void *)RN5T618 },
@@ -103,13 +122,22 @@ static int rn5t618_i2c_probe(struct i2c_client *i2c,
return ret;
}

+ rn5t618_pm_power_off = priv;
if (of_device_is_system_power_controller(i2c->dev.of_node)) {
- if (!pm_power_off) {
- rn5t618_pm_power_off = priv;
+ if (!pm_power_off)
pm_power_off = rn5t618_power_off;
- } else {
+ else
dev_err(&i2c->dev, "Failed to set poweroff capability, already defined\n");
- }
+ }
+
+ rn5t618_restart_handler.notifier_call = rn5t618_restart;
+ rn5t618_restart_handler.priority = 128;
+
+ ret = register_restart_handler(&rn5t618_restart_handler);
+ if (ret) {
+ dev_err(&i2c->dev, "%s: cannot register restart handler, %d\n",
+ __func__, ret);
+ return ret;
}

return 0;
--
2.8.3
\
 
 \ /
  Last update: 2016-06-08 03:21    [W:0.244 / U:0.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site