lkml.org 
[lkml]   [2016]   [Jun]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 5/5] usb: dwc3: rockchip: add devicetree bindings documentation
Dear Heiko,

On 06/30/2016 08:15 PM, Heiko Stuebner wrote:
> Hi William,
>
> Am Donnerstag, 30. Juni 2016, 19:16:40 schrieb William Wu:
>> This patch adds the devicetree documentation required for Rockchip
>> USB3.0 core wrapper consisting of USB3.0 IP from Synopsys.
>>
>> It supports DRD mode, and could operate in device mode (SS, HS, FS)
>> and host mode (SS, HS, FS, LS).
>>
>> Signed-off-by: William Wu <william.wu@rock-chips.com>
>> ---
>> Changes in v5:
>> - rename clock-names, and remove unnecessary clocks (Heiko)
>>
>> Changes in v4:
>> - modify commit log, and add phy documentation location (Sergei)
>>
>> Changes in v3:
>> - add dwc3 address (balbi)
>>
>> Changes in v2:
>> - add rockchip,dwc3.txt to Documentation/devicetree/bindings/ (balbi,
>> Brian)
>>
>> .../devicetree/bindings/usb/rockchip,dwc3.txt | 40
>> ++++++++++++++++++++++ 1 file changed, 40 insertions(+)
>> create mode 100644
>> Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
>>
>> diff --git a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
>> b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt new file mode
>> 100644
>> index 0000000..9c85e19
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
>> @@ -0,0 +1,40 @@
>> +Rockchip SuperSpeed DWC3 USB SoC controller
>> +
>> +Required properties:
>> +- compatible: should contain "rockchip,rk3399-dwc3" for rk3399 SoC
>> +- clocks: A list of phandle + clock-specifier pairs for the
>> + clocks listed in clock-names
>> +- clock-names: Should contain the following:
>> + "ref_clk" Controller reference clk, have to be 24 MHz
>> + "suspend_clk" Controller suspend clk, have to be 24 MHz or 32 KHz
>> + "bus_clk_otg0"Master/Core clock, have to be >= 62.5 MHz for SS
>> + operation and >= 60MHz for HS operation
> why is it called "bus_clk_otg0" not just simply "bus_clk". As far as I
> understand it (and see it in the TRM), you have two dwc3 controllers
> (otg0 and otg1) and clock-names are always meant from the perspective of
> the individual ip-block. So a devicetree would have:
>
> usbdrd3_0: usb@fe800000 {
> compatible = "rockchip,rk3399-dwc3";
> clocks = <&cru SCLK_USB3OTG0_REF>, <&cru SCLK_USB3OTG0_SUSPEND>,
> <&cru ACLK_USB3OTG0>, <&cru ACLK_USB3_GRF>;
> clock-names = "ref_clk", "suspend_clk",
> "bus_clk", "grf_clk";
> ...
> };
>
> usbdrd3_1: usb@fe900000 {
> compatible = "rockchip,rk3399-dwc3";
> clocks = <&cru SCLK_USB3OTG1_REF>, <&cru SCLK_USB3OTG1_SUSPEND>,
> <&cru ACLK_USB3OTG1>, <&cru ACLK_USB3_GRF>;
> clock-names = "ref_clk", "suspend_clk",
> "bus_clk", "grf_clk";
> ...
> };
>
>
> The rest looks really nice now.
Ah, it looks very goog to me. I'll fix it immediately.
Thank you very much!
>
>
> Heiko
>
>> + "grf_clk" Controller grf clk
>> +
>> +Required child node:
>> +A child node must exist to represent the core DWC3 IP block. The name of
>> +the node is not important. The content of the node is defined in
>> dwc3.txt. +
>> +Phy documentation is provided in the following places:
>> +Documentation/devicetree/bindings/phy/rockchip,dwc3-usb-phy.txt
>> +
>> +Example device nodes:
>> +
>> + usbdrd3_0: usb@fe800000 {
>> + compatible = "rockchip,rk3399-dwc3";
>> + clocks = <&cru SCLK_USB3OTG0_REF>, <&cru SCLK_USB3OTG0_SUSPEND>,
>> + <&cru ACLK_USB3OTG0>, <&cru ACLK_USB3_GRF>;
>> + clock-names = "ref_clk", "suspend_clk",
>> + "bus_clk_otg0", "grf_clk";
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> + ranges;
>> + status = "disabled";
>> + usbdrd_dwc3_0: dwc3@fe800000 {
>> + compatible = "snps,dwc3";
>> + reg = <0x0 0xfe800000 0x0 0x100000>;
>> + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
>> + dr_mode = "otg";
>> + status = "disabled";
>> + };
>> + };
>> --
>> 1.9.1
>
>
>


\
 
 \ /
  Last update: 2016-07-01 04:21    [W:0.560 / U:0.376 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site