lkml.org 
[lkml]   [2016]   [Jun]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: modules: add ro_after_init support
+++ Rusty Russell [29/06/16 10:38 +0930]:
>Jessica Yu <jeyu@redhat.com> writes:
>> Add ro_after_init support for modules by adding a new page-aligned section
>> in the module layout (after rodata) for ro_after_init data and enabling RO
>> protection for that section after module init runs.
>>
>> Signed-off-by: Jessica Yu <jeyu@redhat.com>
>
>I would prefer a "bool after_init" flag to module_enable_ro(). It's
>more explicit.

Sure thing, I was just initially worried about the
module_{enable,disable}_ro() asymmetry. :)

>Exposing the flags via uapi looks like a wart, but it's kind of a
>feature, since we don't *unset* it in any section; userspace may want to
>know about it.

Hm, I'm still unsure about this. I'm starting to think it might be a
bit overkill to expose SHF_RO_AFTER_INIT through uapi (although that
is where all the other SHF_* flags are defined) SHF_RO_AFTER_INIT
would technically be used only internally in the kernel (i.e. module
loader), and it'd also be considered a non-standard flag, using a bit
from SHF_MASKOS (OS-specific range). What do you think?

>If you could re-spin, that would be great.

Once I figure out where to put SHF_RO_AFTER_INIT, I'll send a v2.

Thanks for the review!
Jessica

>
>> ---
>> include/linux/module.h | 2 ++
>> include/uapi/linux/elf.h | 1 +
>> kernel/module.c | 73 +++++++++++++++++++++++++++++++++++++++++-------
>> 3 files changed, 66 insertions(+), 10 deletions(-)
>>
>> diff --git a/include/linux/module.h b/include/linux/module.h
>> index f777164..a698d23 100644
>> --- a/include/linux/module.h
>> +++ b/include/linux/module.h
>> @@ -311,6 +311,8 @@ struct module_layout {
>> unsigned int text_size;
>> /* Size of RO section of the module (text+rodata) */
>> unsigned int ro_size;
>> + /* Size of RO after init section */
>> + unsigned int ro_after_init_size;
>>
>> #ifdef CONFIG_MODULES_TREE_LOOKUP
>> struct mod_tree_node mtn;
>> diff --git a/include/uapi/linux/elf.h b/include/uapi/linux/elf.h
>> index cb4a72f..70b172ba 100644
>> --- a/include/uapi/linux/elf.h
>> +++ b/include/uapi/linux/elf.h
>> @@ -286,6 +286,7 @@ typedef struct elf64_phdr {
>> #define SHF_ALLOC 0x2
>> #define SHF_EXECINSTR 0x4
>> #define SHF_RELA_LIVEPATCH 0x00100000
>> +#define SHF_RO_AFTER_INIT 0x00200000
>> #define SHF_MASKPROC 0xf0000000
>>
>> /* special section indexes */
>> diff --git a/kernel/module.c b/kernel/module.c
>> index 7f21ab2..055bf6f 100644
>> --- a/kernel/module.c
>> +++ b/kernel/module.c
>> @@ -1857,10 +1857,11 @@ static void mod_sysfs_teardown(struct module *mod)
>> * from modification and any data from execution.
>> *
>> * General layout of module is:
>> - * [text] [read-only-data] [writable data]
>> - * text_size -----^ ^ ^
>> - * ro_size ------------------------| |
>> - * size -------------------------------------------|
>> + * [text] [read-only-data] [ro-after-init] [writable data]
>> + * text_size -----^ ^ ^ ^
>> + * ro_size ------------------------| | |
>> + * ro_after_init_size -----------------------------| |
>> + * size -----------------------------------------------------------|
>> *
>> * These values are always page-aligned (as is base)
>> */
>> @@ -1883,14 +1884,24 @@ static void frob_rodata(const struct module_layout *layout,
>> (layout->ro_size - layout->text_size) >> PAGE_SHIFT);
>> }
>>
>> +static void frob_ro_after_init(const struct module_layout *layout,
>> + int (*set_memory)(unsigned long start, int num_pages))
>> +{
>> + BUG_ON((unsigned long)layout->base & (PAGE_SIZE-1));
>> + BUG_ON((unsigned long)layout->ro_size & (PAGE_SIZE-1));
>> + BUG_ON((unsigned long)layout->ro_after_init_size & (PAGE_SIZE-1));
>> + set_memory((unsigned long)layout->base + layout->ro_size,
>> + (layout->ro_after_init_size - layout->ro_size) >> PAGE_SHIFT);
>> +}
>> +
>> static void frob_writable_data(const struct module_layout *layout,
>> int (*set_memory)(unsigned long start, int num_pages))
>> {
>> BUG_ON((unsigned long)layout->base & (PAGE_SIZE-1));
>> - BUG_ON((unsigned long)layout->ro_size & (PAGE_SIZE-1));
>> + BUG_ON((unsigned long)layout->ro_after_init_size & (PAGE_SIZE-1));
>> BUG_ON((unsigned long)layout->size & (PAGE_SIZE-1));
>> - set_memory((unsigned long)layout->base + layout->ro_size,
>> - (layout->size - layout->ro_size) >> PAGE_SHIFT);
>> + set_memory((unsigned long)layout->base + layout->ro_after_init_size,
>> + (layout->size - layout->ro_after_init_size) >> PAGE_SHIFT);
>> }
>>
>> /* livepatching wants to disable read-only so it can frob module. */
>> @@ -1898,6 +1909,7 @@ void module_disable_ro(const struct module *mod)
>> {
>> frob_text(&mod->core_layout, set_memory_rw);
>> frob_rodata(&mod->core_layout, set_memory_rw);
>> + frob_ro_after_init(&mod->core_layout, set_memory_rw);
>> frob_text(&mod->init_layout, set_memory_rw);
>> frob_rodata(&mod->init_layout, set_memory_rw);
>> }
>> @@ -1908,11 +1920,16 @@ void module_enable_ro(const struct module *mod)
>> frob_rodata(&mod->core_layout, set_memory_ro);
>> frob_text(&mod->init_layout, set_memory_ro);
>> frob_rodata(&mod->init_layout, set_memory_ro);
>> +
>> + /* after init */
>> + if (mod->state == MODULE_STATE_LIVE)
>> + frob_ro_after_init(&mod->core_layout, set_memory_ro);
>> }
>>
>> static void module_enable_nx(const struct module *mod)
>> {
>> frob_rodata(&mod->core_layout, set_memory_nx);
>> + frob_ro_after_init(&mod->core_layout, set_memory_nx);
>> frob_writable_data(&mod->core_layout, set_memory_nx);
>> frob_rodata(&mod->init_layout, set_memory_nx);
>> frob_writable_data(&mod->init_layout, set_memory_nx);
>> @@ -1921,6 +1938,7 @@ static void module_enable_nx(const struct module *mod)
>> static void module_disable_nx(const struct module *mod)
>> {
>> frob_rodata(&mod->core_layout, set_memory_x);
>> + frob_ro_after_init(&mod->core_layout, set_memory_x);
>> frob_writable_data(&mod->core_layout, set_memory_x);
>> frob_rodata(&mod->init_layout, set_memory_x);
>> frob_writable_data(&mod->init_layout, set_memory_x);
>> @@ -1963,6 +1981,8 @@ static void disable_ro_nx(const struct module_layout *layout)
>> frob_text(layout, set_memory_rw);
>> frob_rodata(layout, set_memory_rw);
>> frob_rodata(layout, set_memory_x);
>> + frob_ro_after_init(layout, set_memory_rw);
>> + frob_ro_after_init(layout, set_memory_x);
>> frob_writable_data(layout, set_memory_x);
>> }
>>
>> @@ -2305,6 +2325,7 @@ static void layout_sections(struct module *mod, struct load_info *info)
>> * finder in the two loops below */
>> { SHF_EXECINSTR | SHF_ALLOC, ARCH_SHF_SMALL },
>> { SHF_ALLOC, SHF_WRITE | ARCH_SHF_SMALL },
>> + { SHF_RO_AFTER_INIT | SHF_ALLOC, ARCH_SHF_SMALL },
>> { SHF_WRITE | SHF_ALLOC, ARCH_SHF_SMALL },
>> { ARCH_SHF_SMALL | SHF_ALLOC, 0 }
>> };
>> @@ -2336,7 +2357,11 @@ static void layout_sections(struct module *mod, struct load_info *info)
>> mod->core_layout.size = debug_align(mod->core_layout.size);
>> mod->core_layout.ro_size = mod->core_layout.size;
>> break;
>> - case 3: /* whole core */
>> + case 2: /* RO after init */
>> + mod->core_layout.size = debug_align(mod->core_layout.size);
>> + mod->core_layout.ro_after_init_size = mod->core_layout.size;
>> + break;
>> + case 4: /* whole core */
>> mod->core_layout.size = debug_align(mod->core_layout.size);
>> break;
>> }
>> @@ -2366,7 +2391,14 @@ static void layout_sections(struct module *mod, struct load_info *info)
>> mod->init_layout.size = debug_align(mod->init_layout.size);
>> mod->init_layout.ro_size = mod->init_layout.size;
>> break;
>> - case 3: /* whole init */
>> + case 2:
>> + /*
>> + * RO after init doesn't apply to init_layout (only
>> + * core_layout), so it just takes the value of ro_size.
>> + */
>> + mod->init_layout.ro_after_init_size = mod->init_layout.ro_size;
>> + break;
>> + case 4: /* whole init */
>> mod->init_layout.size = debug_align(mod->init_layout.size);
>> break;
>> }
>> @@ -3172,6 +3204,7 @@ static struct module *layout_and_allocate(struct load_info *info, int flags)
>> {
>> /* Module within temporary copy. */
>> struct module *mod;
>> + unsigned int ndx;
>> int err;
>>
>> mod = setup_load_info(info, flags);
>> @@ -3191,6 +3224,15 @@ static struct module *layout_and_allocate(struct load_info *info, int flags)
>> /* We will do a special allocation for per-cpu sections later. */
>> info->sechdrs[info->index.pcpu].sh_flags &= ~(unsigned long)SHF_ALLOC;
>>
>> + /*
>> + * Mark ro_after_init section with SHF_RO_AFTER_INIT so that
>> + * layout_sections() can put it in the right place.
>> + * Note: ro_after_init sections also have SHF_{WRITE,ALLOC} set.
>> + */
>> + ndx = find_sec(info, ".data..ro_after_init");
>> + if (ndx)
>> + info->sechdrs[ndx].sh_flags |= SHF_RO_AFTER_INIT;
>> +
>> /* Determine total sizes, and put offsets in sh_entsize. For now
>> this is done generically; there doesn't appear to be any
>> special cases for the architectures. */
>> @@ -3357,12 +3399,19 @@ static noinline int do_init_module(struct module *mod)
>> /* Switch to core kallsyms now init is done: kallsyms may be walking! */
>> rcu_assign_pointer(mod->kallsyms, &mod->core_kallsyms);
>> #endif
>> + /*
>> + * RO and NX regions should already be protected at this point,
>> + * so the below module_enable_ro() call enables additional RO
>> + * protection for the ro_after_init section only.
>> + */
>> + module_enable_ro(mod);
>> mod_tree_remove_init(mod);
>> disable_ro_nx(&mod->init_layout);
>> module_arch_freeing_init(mod);
>> mod->init_layout.base = NULL;
>> mod->init_layout.size = 0;
>> mod->init_layout.ro_size = 0;
>> + mod->init_layout.ro_after_init_size = 0;
>> mod->init_layout.text_size = 0;
>> /*
>> * We want to free module_init, but be aware that kallsyms may be
>> @@ -3454,7 +3503,11 @@ static int complete_formation(struct module *mod, struct load_info *info)
>> /* This relies on module_mutex for list integrity. */
>> module_bug_finalize(info->hdr, info->sechdrs, mod);
>>
>> - /* Set RO and NX regions */
>> + /*
>> + * Set RO and NX regions. Since module is not LIVE yet,
>> + * the ro_after_init section will remain RW until after
>> + * do_one_initcall().
>> + */
>> module_enable_ro(mod);
>> module_enable_nx(mod);
>>
>> --
>> 2.4.3

\
 
 \ /
  Last update: 2016-06-30 00:01    [W:0.123 / U:0.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site