Messages in this thread | | | Date | Tue, 28 Jun 2016 15:56:33 -0500 | From | Rob Herring <> | Subject | Re: [PATCH 2/6] ARM: dts: nuc900: Add nuc970 dts files |
| |
On Sat, Jun 25, 2016 at 06:37:18PM +0800, Wan Zongshun wrote: > This patch is to add dts support for nuc970 platform. > > Signed-off-by: Wan Zongshun <mcuos.com@gmail.com> > --- > .../devicetree/bindings/arm/nuvoton/nuc970.txt | 30 +++ > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/nuc970-evb.dts | 20 ++ > arch/arm/boot/dts/nuc970.dtsi | 93 ++++++++ > include/dt-bindings/clock/nuc970-clock.h | 233 +++++++++++++++++++++ > 5 files changed, 377 insertions(+) > create mode 100644 Documentation/devicetree/bindings/arm/nuvoton/nuc970.txt > create mode 100644 arch/arm/boot/dts/nuc970-evb.dts > create mode 100644 arch/arm/boot/dts/nuc970.dtsi > create mode 100644 include/dt-bindings/clock/nuc970-clock.h > > diff --git a/Documentation/devicetree/bindings/arm/nuvoton/nuc970.txt b/Documentation/devicetree/bindings/arm/nuvoton/nuc970.txt > new file mode 100644 > index 0000000..df8637a > --- /dev/null > +++ b/Documentation/devicetree/bindings/arm/nuvoton/nuc970.txt > @@ -0,0 +1,30 @@ > +Nuvoton NUC970 SoC platform Device Tree Bindings > +------------------------------------------ > + > +Boards with the NUC970 SoC shall have the following properties: > + > +Root node required properties: > +- compatible: Should be "nuvoton,nuc970evb", "nuvoton,nuc970" > + > +Timer required properties:
This should go in bindings/timer/
> +- compatible: Should be "nuvoton,tmr"
Needs an SoC specific compatible string
> +- reg: Should contain registers location and length > +- interrupts: hwirq is direct mapping to irq number > +- clocks: phandle to input clock. > + > +Clock required properties:
This should go in bindings/clock/
> +- compatible: Should be "nuvoton,clk"
SoC specific...
> +- reg: Should contain registers location and length > + > +Interrupt-controller required properties
And so on...
> +- compatible: Should be "nuvoton,aic" > +- reg: Should contain registers location and length > +- interrupt-cells: set to 1 > + > +GCR register required properties: > +- compatible: Should be "nuvoton,gcr" > +- reg: Should contain registers location and length > + > +Uart required properties: > +- compatible: Should be "nuvoton,nuc970-uart" > +- reg: Should contain registers location and length
| |