lkml.org 
[lkml]   [2016]   [Jun]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 5/5] mfd: rn5t618: register restart handler
On Mon, 27 Jun 2016, Stefan Agner wrote:

> Use the PMIC's repower capability for reboots. Register a restart
> handler and use a slightly elevated priority of 192 since the PMIC
> has suprior reset capability (causing a system wide reset).
>
> Signed-off-by: Stefan Agner <stefan@agner.ch>
> Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> ---
> drivers/mfd/rn5t618.c | 43 +++++++++++++++++++++++++++++++++++++------
> 1 file changed, 37 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/mfd/rn5t618.c b/drivers/mfd/rn5t618.c
> index 1831740..b3ca6df 100644
> --- a/drivers/mfd/rn5t618.c
> +++ b/drivers/mfd/rn5t618.c
> @@ -12,11 +12,13 @@
> * along with this program. If not, see <http://www.gnu.org/licenses/>.
> */
>
> +#include <linux/delay.h>
> #include <linux/i2c.h>
> #include <linux/mfd/core.h>
> #include <linux/mfd/rn5t618.h>
> #include <linux/module.h>
> #include <linux/of_device.h>
> +#include <linux/reboot.h>
> #include <linux/regmap.h>
>
> static const struct mfd_cell rn5t618_cells[] = {
> @@ -50,17 +52,38 @@ static const struct regmap_config rn5t618_regmap_config = {
> };
>
> static struct rn5t618 *rn5t618_pm_power_off;
> +static struct notifier_block rn5t618_restart_handler;
>
> -static void rn5t618_power_off(void)
> +static void rn5t618_trigger_poweroff_sequence(bool repower)
> {
> /* disable automatic repower-on */
> regmap_update_bits(rn5t618_pm_power_off->regmap, RN5T618_REPCNT,
> - RN5T618_REPCNT_REPWRON, 0);
> + RN5T618_REPCNT_REPWRON,
> + repower ? RN5T618_REPCNT_REPWRON : 0);
> /* start power-off sequence */
> regmap_update_bits(rn5t618_pm_power_off->regmap, RN5T618_SLPCNT,
> RN5T618_SLPCNT_SWPWROFF, RN5T618_SLPCNT_SWPWROFF);
> }
>
> +static void rn5t618_power_off(void)
> +{
> + rn5t618_trigger_poweroff_sequence(false);
> +}
> +
> +static int rn5t618_restart(struct notifier_block *this,
> + unsigned long mode, void *cmd)
> +{
> + rn5t618_trigger_poweroff_sequence(true);
> +
> + /*
> + * Repower factor detection on PMIC side is not instant. 1ms
> + * proved to be enouth time until reset takes effect.

Spell check.

Please fix this, add all the Acks you received and resubmit the set.

Acked-by: Lee Jones <lee.jones@linaro.org>

> + */
> + mdelay(1);
> +
> + return NOTIFY_DONE;
> +}
> +
> static const struct of_device_id rn5t618_of_match[] = {
> { .compatible = "ricoh,rn5t567", .data = (void *)RN5T567 },
> { .compatible = "ricoh,rn5t618", .data = (void *)RN5T618 },
> @@ -102,13 +125,21 @@ static int rn5t618_i2c_probe(struct i2c_client *i2c,
> return ret;
> }
>
> + rn5t618_pm_power_off = priv;
> if (of_device_is_system_power_controller(i2c->dev.of_node)) {
> - if (!pm_power_off) {
> - rn5t618_pm_power_off = priv;
> + if (!pm_power_off)
> pm_power_off = rn5t618_power_off;
> - } else {
> + else
> dev_warn(&i2c->dev, "Poweroff callback already assigned\n");
> - }
> + }
> +
> + rn5t618_restart_handler.notifier_call = rn5t618_restart;
> + rn5t618_restart_handler.priority = 192;
> +
> + ret = register_restart_handler(&rn5t618_restart_handler);
> + if (ret) {
> + dev_err(&i2c->dev, "cannot register restart handler, %d\n", ret);
> + return ret;
> }
>
> return 0;

--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

\
 
 \ /
  Last update: 2016-06-28 14:41    [W:2.353 / U:1.240 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site