lkml.org 
[lkml]   [2016]   [Jun]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 7/7] doc: bindings: act8945a-charger: Update properties
Date
Due the driver improvements, update the properties,
- Remove "active-semi,check-battery-temperature" property.
- Add the properties, "active-semi,irq_gpio"
and "active-semi,lbo-gpios".

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
---

Documentation/devicetree/bindings/power/act8945a-charger.txt | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/power/act8945a-charger.txt b/Documentation/devicetree/bindings/power/act8945a-charger.txt
index bea254c..d7cf05b 100644
--- a/Documentation/devicetree/bindings/power/act8945a-charger.txt
+++ b/Documentation/devicetree/bindings/power/act8945a-charger.txt
@@ -4,10 +4,12 @@ Required properties:
- compatible: "active-semi,act8945a", please refer to ../mfd/act8945a.txt.
- active-semi,chglev-gpios: charge current level phandle with args
as described in ../gpio/gpio.txt.
+ - active-semi,irq_gpios: specify the charger interrupt input phanle
+ with args as as described in ../gpio/gpio.txt.
+ - active-semi,lbo-gpios: specify the low battery voltage detect phandle
+ with args as as described in ../gpio/gpio.txt.

Optional properties:
- - active-semi,check-battery-temperature: boolean to check the battery
- temperature or not.
- active-semi,input-voltage-threshold-microvolt: unit: mV;
Specifies the charger's input over-voltage threshold value;
The value can be: 6600, 7000, 7500, 8000; default: 6600
--
2.7.4
\
 
 \ /
  Last update: 2016-06-24 10:21    [W:0.086 / U:0.484 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site