Messages in this thread Patch in this message | | | From | megous@megous ... | Subject | [PATCH v2 03/14] dt-bindings: document sun8i_ths - H3 thermal sensor driver | Date | Sat, 25 Jun 2016 05:45:00 +0200 |
| |
From: Ondrej Jirman <megous@megous.com>
This patch adds the binding documentation for the sun8i_ths driver. This is a driver for thermal sensor found in Allwinner H3 SoC.
Signed-off-by: Ondřej Jirman <megous@megous.com> --- .../devicetree/bindings/thermal/sun8i-ths.txt | 26 ++++++++++++++++++++++ 1 file changed, 26 insertions(+) create mode 100644 Documentation/devicetree/bindings/thermal/sun8i-ths.txt
diff --git a/Documentation/devicetree/bindings/thermal/sun8i-ths.txt b/Documentation/devicetree/bindings/thermal/sun8i-ths.txt new file mode 100644 index 0000000..76859d4 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/sun8i-ths.txt @@ -0,0 +1,26 @@ +* Thermal sensor driver for Allwinner H3 SoC + +Required properties: +- compatible : "allwinner,sun8i-h3-ths" +- reg : Address range of the thermal sensor registers and of the calibration + data +- resets : Must contain phandles to reset controls matching the entries + of the names +- reset-names : Must include the name "ahb" +- clocks : Must contain phandles to clock controls matching the entries + of the names +- clock-names : Must contain "ahb" for the bus gate and "ths" for the THS + clock + +Example: +ths: ths@01c25000 { + #thermal-sensor-cells = <0>; + compatible = "allwinner,sun8i-h3-ths"; + reg = <0x01c25000 0x400>, + <0x01c14234 0x4>; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + resets = <&bus_rst 136>; + reset-names = "ahb"; + clocks = <&bus_gates 72>, <&ths_clk>; + clock-names = "ahb", "ths"; +}; -- 2.9.0
| |