lkml.org 
[lkml]   [2016]   [Jun]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v5 2/2] [media] atmel-isc: DT binding for Image Sensor Controller driver
From
Date


On 6/24/2016 15:35, Boris Brezillon wrote:
> On Fri, 24 Jun 2016 13:54:09 +0800
> "Wu, Songjun" <songjun.wu@atmel.com> wrote:
>
>> Hi Rob,
>>
>> Thank you for your comments.
>>
>> On 6/20/2016 21:25, Rob Herring wrote:
>>> On Fri, Jun 17, 2016 at 04:57:14PM +0800, Songjun Wu wrote:
>>>> DT binding documentation for ISC driver.
>>>>
>>>> Signed-off-by: Songjun Wu <songjun.wu@atmel.com>
>>>> ---
>>>>
>>>> Changes in v5:
>>>> - Add clock names.
>>>>
>>>> Changes in v4:
>>>> - Remove the isc clock nodes.
>>>>
>>>> Changes in v3:
>>>> - Remove the 'atmel,sensor-preferred'.
>>>> - Modify the isc clock node according to the Rob's remarks.
>>>>
>>>> Changes in v2:
>>>> - Remove the unit address of the endpoint.
>>>> - Add the unit address to the clock node.
>>>> - Avoid using underscores in node names.
>>>> - Drop the "0x" in the unit address of the i2c node.
>>>> - Modify the description of 'atmel,sensor-preferred'.
>>>> - Add the description for the ISC internal clock.
>>>>
>>>> .../devicetree/bindings/media/atmel-isc.txt | 64 ++++++++++++++++++++++
>>>> 1 file changed, 64 insertions(+)
>>>> create mode 100644 Documentation/devicetree/bindings/media/atmel-isc.txt
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/media/atmel-isc.txt b/Documentation/devicetree/bindings/media/atmel-isc.txt
>>>> new file mode 100644
>>>> index 0000000..9558a77
>>>> --- /dev/null
>>>> +++ b/Documentation/devicetree/bindings/media/atmel-isc.txt
>>>> @@ -0,0 +1,64 @@
>>>> +Atmel Image Sensor Controller (ISC)
>>>> +----------------------------------------------
>>>> +
>>>> +Required properties for ISC:
>>>> +- compatible
>>>> + Must be "atmel,sama5d2-isc".
>>>> +- reg
>>>> + Physical base address and length of the registers set for the device.
>>>> +- interrupts
>>>> + Should contain IRQ line for the ISC.
>>>> +- clocks
>>>> + List of clock specifiers, corresponding to entries in
>>>> + the clock-names property;
>>>> + Please refer to clock-bindings.txt.
>>>> +- clock-names
>>>> + Required elements: "hclock".
>>>
>>> What about the 2 other clocks in the example?
>>>
>> The other clocks is optional, not required.
>> Do you have any suggestion?
>
> Just add a second look at the sama5d2 and iscck gck are not optional.
> What we call optional clocks are clocks that are not necessarily
> required depending on the IP revision or external clocks that are board
> dependent. This is not the case here: iscck and gck are internal to the
> SoC, and are always available. Whether you want to use them or not is a
> different question, and should not be encoded in the clocks/clock-names
> properties.
>
> To sum-up, define those 3 clocks as required and document their names.
>
Thank you for your suggestion.

\
 
 \ /
  Last update: 2016-06-24 11:41    [W:0.052 / U:0.748 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site