lkml.org 
[lkml]   [2016]   [Jun]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    SubjectRe: [PATCH v8 2/3] CMDQ: Mediatek CMDQ driver
    From
    Date
    Hi, HS:

    On Mon, 2016-05-30 at 11:19 +0800, HS Liao wrote:
    > This patch is first version of Mediatek Command Queue(CMDQ) driver. The
    > CMDQ is used to help read/write registers with critical time limitation,
    > such as updating display configuration during the vblank. It controls
    > Global Command Engine (GCE) hardware to achieve this requirement.
    > Currently, CMDQ only supports display related hardwares, but we expect
    > it can be extended to other hardwares for future requirements.
    >
    > Signed-off-by: HS Liao <hs.liao@mediatek.com>
    > Signed-off-by: CK Hu <ck.hu@mediatek.com>
    > ---
    > drivers/soc/mediatek/Kconfig | 10 +
    > drivers/soc/mediatek/Makefile | 1 +
    > drivers/soc/mediatek/mtk-cmdq.c | 943 ++++++++++++++++++++++++++++++++++++++++
    > include/soc/mediatek/cmdq.h | 197 +++++++++
    > 4 files changed, 1151 insertions(+)
    > create mode 100644 drivers/soc/mediatek/mtk-cmdq.c
    > create mode 100644 include/soc/mediatek/cmdq.h

    [...]

    > +
    > +/* events for CMDQ and display */
    > +enum cmdq_event {
    > + /* Display start of frame(SOF) events */
    > + CMDQ_EVENT_DISP_OVL0_SOF = 11,
    > + CMDQ_EVENT_DISP_OVL1_SOF = 12,
    > + CMDQ_EVENT_DISP_RDMA0_SOF = 13,
    > + CMDQ_EVENT_DISP_RDMA1_SOF = 14,
    > + CMDQ_EVENT_DISP_RDMA2_SOF = 15,
    > + CMDQ_EVENT_DISP_WDMA0_SOF = 16,
    > + CMDQ_EVENT_DISP_WDMA1_SOF = 17,
    > + /* Display end of frame(EOF) events */
    > + CMDQ_EVENT_DISP_OVL0_EOF = 39,
    > + CMDQ_EVENT_DISP_OVL1_EOF = 40,
    > + CMDQ_EVENT_DISP_RDMA0_EOF = 41,
    > + CMDQ_EVENT_DISP_RDMA1_EOF = 42,
    > + CMDQ_EVENT_DISP_RDMA2_EOF = 43,
    > + CMDQ_EVENT_DISP_WDMA0_EOF = 44,
    > + CMDQ_EVENT_DISP_WDMA1_EOF = 45,
    > + /* Mutex end of frame(EOF) events */
    > + CMDQ_EVENT_MUTEX0_STREAM_EOF = 53,
    > + CMDQ_EVENT_MUTEX1_STREAM_EOF = 54,
    > + CMDQ_EVENT_MUTEX2_STREAM_EOF = 55,
    > + CMDQ_EVENT_MUTEX3_STREAM_EOF = 56,
    > + CMDQ_EVENT_MUTEX4_STREAM_EOF = 57,
    > + /* Display underrun events */
    > + CMDQ_EVENT_DISP_RDMA0_UNDERRUN = 63,
    > + CMDQ_EVENT_DISP_RDMA1_UNDERRUN = 64,
    > + CMDQ_EVENT_DISP_RDMA2_UNDERRUN = 65,
    > + /* Keep this at the end of HW events */
    > + CMDQ_MAX_HW_EVENT_COUNT = 260,
    > +};

    The value of these symbol is just the GCE-HW-defined value. I think it's
    not appropriate to expose HW-defined value to client. For another SoC
    GCE HW, these definition may change.

    One way to solve this problem is to translate symbol to value
    internally. But these events looks like interrupt and the value may vary
    by each SoC, to prevent driver modified frequently, it's better to place
    the value definition in device tree. It may looks like:

    mmsys: clock-controller@14000000 {
    compatible = "mediatek,mt8173-mmsys";
    mediatek,gce = <&gce>;
    gce-events = <53 54>;
    gce-event-names = "MUTEX0_EOF","MUTEX1_EOF";
    }

    For cmdq driver, you just need modify interface from

    int cmdq_rec_wfe(struct cmdq_rec *rec, enum cmdq_event event)
    int cmdq_rec_clear_event(struct cmdq_rec *rec, enum cmdq_event event)

    to

    int cmdq_rec_wfe(struct cmdq_rec *rec, u32 event)
    int cmdq_rec_clear_event(struct cmdq_rec *rec, u32 event)

    Regards,
    CK


    \
     
     \ /
      Last update: 2016-06-23 08:41    [W:4.236 / U:0.824 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site