lkml.org 
[lkml]   [2016]   [Jun]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/2] leds: ncp5623: Add device tree binding documentation
From
Date
Hi Rob,

Le 21. 06. 16 à 23:52, Rob Herring a écrit :
> On Tue, Jun 21, 2016 at 09:29:13AM +0200, Florian Vaussard wrote:
>> Add device tree binding documentation for On Semiconductor NCP5623 I2C
>> LED driver. The driver can independently control the PWM of the 3
>> channels with 32 levels of intensity.
>>
>> The current delivered by the current source can be controlled using the
>> led-max-microamp property. In order to control this value, it is also
>> necessary to know the current on the Iref pin, hence the
>> onnn,led-iref-microamp property. It is usually set using an external
>> bias resistor, following Iref = Vref/Rbias with Vref=0.6V.
>>
>> Signed-off-by: Florian Vaussard <florian.vaussard@heig-vd.ch>
>> ---
>> .../devicetree/bindings/leds/leds-ncp5623.txt | 44 ++++++++++++++++++++++
>> 1 file changed, 44 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/leds/leds-ncp5623.txt
>>
>> diff --git a/Documentation/devicetree/bindings/leds/leds-ncp5623.txt b/Documentation/devicetree/bindings/leds/leds-ncp5623.txt
>> new file mode 100644
>> index 0000000..0dc8345
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/leds/leds-ncp5623.txt
>> @@ -0,0 +1,44 @@
>> +* ON Semiconductor - NCP5623 3-Channel LED Driver
>> +
>> +The NCP5623 is a 3-channel I2C LED driver. The brightness of each
>> +channel can be independently set using 32 levels. Each LED is represented
>> +as a sub-node of the device.
>> +
>> +Required properties:
>> + - compatible: Should be "onnn,ncp5623"
>> + - reg: I2C slave address (fixed to 0x38)
>> + - #address-cells: must be 1
>> + - #size-cells: must be 0
>> + - onnn,led-iref-microamp: Current on the Iref pin in microampere
>> + - led-max-microamp: Desired maximum current for each LED in microampere
>> + (maximum 30000uA)
>> +
>> +LED sub-node properties:
>> + - reg : LED channel number (0..2)
>> + - For other LED properties see:
>> + Documentation/devicetree/bindings/leds/common.txt
>> +
>> +Example:
>> +
>> +led1: ncp5623@38 {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + compatible = "onnn,ncp5623";
>> + reg = <0x38>;
>> +
>> + led1_r@0 {
>
> Don't use underscores in node names.
>

Sorry for the mistake, I will fix.

Thanks for the review,
Florian

\
 
 \ /
  Last update: 2016-06-22 09:01    [W:0.094 / U:0.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site