lkml.org 
[lkml]   [2016]   [Jun]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2] mmc: core: Only change mode if mmc_select_bus_width() is successful.
On 8 June 2016 at 12:27, Peter Griffin <peter.griffin@linaro.org> wrote:
> mmc_select_bus_width() returns bus width (4 or 8) on success or
> zero if unsupported. So only change mode if setting the bus width
> is successful.
>
> Fixes f741494 mmc: fix mmc mode selection for HS-DDR and higher
> Fixes: 287980e (remove lots of IS_ERR_VALUE abuses)
>
> Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
> Cc: Chen-Yu Tsai <wens@csie.org>
> Cc: Arnd Bergmann <arnd@arndb.de>
>

Thanks, applied for next! Updated the changelog to remove the "fixes"
tags and the Cc, as those shouldn't be relevant.

Kind regards
Uffe

> ---
>
> v2: Rebase on v4.7-rc2 which includes a fix from Chen-Yu and update
> commit message.
> ---
> drivers/mmc/core/mmc.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
> index 5d438ad..aafb73d 100644
> --- a/drivers/mmc/core/mmc.c
> +++ b/drivers/mmc/core/mmc.c
> @@ -1276,7 +1276,7 @@ static int mmc_select_hs200(struct mmc_card *card)
> * switch to HS200 mode if bus width is set successfully.
> */
> err = mmc_select_bus_width(card);
> - if (err >= 0) {
> + if (err > 0) {
> val = EXT_CSD_TIMING_HS200 |
> card->drive_strength << EXT_CSD_DRV_STR_SHIFT;
> err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
> @@ -1583,7 +1583,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
> } else if (mmc_card_hs(card)) {
> /* Select the desired bus width optionally */
> err = mmc_select_bus_width(card);
> - if (err >= 0) {
> + if (err > 0) {
> err = mmc_select_hs_ddr(card);
> if (err)
> goto free_card;
> --
> 1.9.1
>

\
 
 \ /
  Last update: 2016-06-22 18:01    [W:0.399 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site