lkml.org 
[lkml]   [2016]   [Jun]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [PATCH v3 1/7] max8903: adds documentation for device tree bindings.
    On Fri, Jun 17, 2016 at 03:00:20PM +1000, Chris Lapa wrote:
    > From: Chris Lapa <chris@lapa.com.au>
    >
    > Signed-off-by: Chris Lapa <chris@lapa.com.au>
    > ---
    > .../devicetree/bindings/power/max8903-charger.txt | 25 ++++++++++++++++++++++
    > 1 file changed, 25 insertions(+)
    > create mode 100644 Documentation/devicetree/bindings/power/max8903-charger.txt
    >
    > diff --git a/Documentation/devicetree/bindings/power/max8903-charger.txt b/Documentation/devicetree/bindings/power/max8903-charger.txt
    > new file mode 100644
    > index 0000000..aea1dd2a
    > --- /dev/null
    > +++ b/Documentation/devicetree/bindings/power/max8903-charger.txt
    > @@ -0,0 +1,25 @@
    > +Maxim Semiconductor MAX8903 Battery Charger bindings
    > +
    > +Required properties:
    > +- compatible: "maxim,max8903-charger" for MAX8903 Battery Charger

    Drop "charger" as that is implied by the chip.

    > +- dok-gpios: Valid DC power has been detected, optional if uok-gpios is provided
    > +- uok-gpios: Valid USB power has been detected, optional if dok-gpios is provided
    > +
    > +Optional properties:
    > +- cen-gpios: Charge enable pin
    > +- chg-gpios: Charger status pin
    > +- flt-gpios: Fault pin
    > +- dcm-gpios: Current limit mode setting (DC or USB)
    > +- usus-gpios: USB suspend pin

    Need to state direction and active state for all of these.

    \
     
     \ /
      Last update: 2016-06-20 16:01    [W:4.021 / U:0.076 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site