lkml.org 
[lkml]   [2016]   [Jun]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v2 08/11] Documentation: phy: Let the rockchip eMMC PHY get an exported card clock
Date
Am Montag, 13. Juni 2016, 16:04:32 schrieb Douglas Anderson:
> As of an earlier change in this series ("Documentation: mmc:
> sdhci-of-arasan: Add ability to export card clock") the SDHCI driver
> used on Rockchip SoCs can now expose its clock. Let's now specify that
> the PHY can use it.
>
> Letting the PHY get access to this clock means it can adjust
> phyctrl_frqsel field appropriately. Although the Rockchip PHY appears
> slightly different than the reference Arasan one, you can see that the
> Arasan datasheet [1] had it defined as:
> Select the frequency range of DLL operation:
> 3b'000 => 200MHz to 170 MHz
> 3b'001 => 170MHz to 140 MHz
> 3b'010 => 140MHz to 110 MHz
> 3b'011 => 110MHz to 80MHz
> 3b'100 => 80MHz to 50 MHz
> 3b'101 => 275Mhz to 250MHz
> 3b'110 => 250MHz to 225MHz
> 3b'111 => 225MHz to 200MHz
>
> On the Rockchip version of the PHY we have less granularity but the idea
> is the same.
>
> [1]: https://arasan.com/wp-content/media/eMMC-5-1-Total-Solution_Rev-1-3.pdf
>
> Signed-off-by: Douglas Anderson <dianders@chromium.org>

Reviewed-by: Heiko Stuebner <heiko@sntech.de>

\
 
 \ /
  Last update: 2016-06-19 00:41    [W:0.104 / U:10.740 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site