lkml.org 
[lkml]   [2016]   [Jun]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] i2c: qup: Cleared the error bits in ISR
> We run the command i2cdetect for address 0x3 to 0x77. The QUP generates
> write error for address 0x3 to 0x7 apart from other bus errors since
> these are reserved addresses. I was getting the crash in non DMA mode
> and BAM hang in DMA mode before putting the fix.
>
> Also we have connected the I2C TPM and run the following script
> overnight for both DMA and Non DMA mode. The script checks for
> all transfer length and we are generating multiple NACK and
> Non NACK error before each valid transfer.
>
> a=1
>
> while [ $a -lt 4096 ]
> do
> echo $a
> i2cdetect -y -a -r 0 0x03 0x77
> tpm-manager get_random $a
> i2cdetect -y -a -r 1 0x03 0x77
> a=`expr $a + 1`
> done

So, what is the outcome of this discussion?

[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2016-06-18 19:21    [W:0.054 / U:0.800 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site