Messages in this thread Patch in this message | | | From | Srinivas Kandagatla <> | Subject | [PATCH 15/16] arm64: dts: msm8996: add sdc2 pinctrl | Date | Fri, 17 Jun 2016 16:14:12 +0100 |
| |
This patch adds pinctrl required for sdhci for external sd card controller.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> --- arch/arm64/boot/dts/qcom/msm8996-pins.dtsi | 48 ++++++++++++++++++++++++++++++ 1 file changed, 48 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi index 551707a..6599404 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996-pins.dtsi @@ -252,4 +252,52 @@ bias-pull-down; }; }; + + sdc2_clk_on: sdc2_clk_on { + config { + pins = "sdc2_clk"; + bias-disable; /* NO pull */ + drive-strength = <16>; /* 16 MA */ + }; + }; + + sdc2_clk_off: sdc2_clk_off { + config { + pins = "sdc2_clk"; + bias-disable; /* NO pull */ + drive-strength = <2>; /* 2 MA */ + }; + }; + + sdc2_cmd_on: sdc2_cmd_on { + config { + pins = "sdc2_cmd"; + bias-pull-up; /* pull up */ + drive-strength = <10>; /* 10 MA */ + }; + }; + + sdc2_cmd_off: sdc2_cmd_off { + config { + pins = "sdc2_cmd"; + bias-pull-up; /* pull up */ + drive-strength = <2>; /* 2 MA */ + }; + }; + + sdc2_data_on: sdc2_data_on { + config { + pins = "sdc2_data"; + bias-pull-up; /* pull up */ + drive-strength = <10>; /* 10 MA */ + }; + }; + + sdc2_data_off: sdc2_data_off { + config { + pins = "sdc2_data"; + bias-pull-up; /* pull up */ + drive-strength = <2>; /* 2 MA */ + }; + }; }; -- 2.7.4
| |