lkml.org 
[lkml]   [2016]   [Jun]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v3 1/2] Documentation: bindings: add dt doc for Rockchip PCIe controller
Date
On Thursday, June 16, 2016 9:50:21 AM CEST Shawn Lin wrote:

> + reset-names = "core", "mgmt", "mgmt-sticky", "pipe";
> + phys = <&pcie_phy>;
> + phy-names = "pcie-phy";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pcie_clkreq>;
> + #interrupt-cells = <1>;
> + interrupt-controller;
> + interrupt-map-mask = <0 0 0 7>;
> + interrupt-map = <0 0 0 1 &pcie0 1>,
> + <0 0 0 2 &pcie0 2>,
> + <0 0 0 3 &pcie0 3>,
> + <0 0 0 4 &pcie0 4>;
> +};
>

One thing that came up in the review of the new Marvell PCIe driver is that it's
most likely invalid for a device node to have both "interrupt-controller"
and "interrupt-map" properties. I originally thought this was a nice way to
handle embedded irqchips within the PCIe host, but it only really works
by coincidence with the current kernel, and only as long as the hwirq number
of the irqchip matches the integer representation of the irq line in the root
bridge (which it does in the example above).

For that driver we concluded that it would be less of a hack to have the
irqchip as a child node of the PCIe host after all (just not with
device_type="pci" of course), and that makes the translation work as
expected.

Arnd

\
 
 \ /
  Last update: 2016-06-16 09:41    [W:0.057 / U:0.272 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site