lkml.org 
[lkml]   [2016]   [Jun]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [v3,1/2] b43: Remove unused phy_a code
Date
Michael Büsch <m@bues.ch> writes:

> On Thu, 16 Jun 2016 15:23:37 +0000 (UTC)
> Kalle Valo <kvalo@codeaurora.org> wrote:
>
>> Guenter Roeck <linux@roeck-us.net> wrote:
>> > gcc-6 reports the following error with -Werror=unused-const-variable.
>> >
>> > drivers/net/wireless/broadcom/b43/phy_a.c:576:40: error:
>> > 'b43_phyops_a' defined but not used
>> >
>> > Per Michael Büsch: "All a-phy code is usused", so remove it all,
>> > and move the remaining Type-G initialization code into phy_g.c.
>> >
>> > Reported-by: Fengguang Wu <fengguang.wu@intel.com> [0-day test robot]
>> > Cc: Michael Büsch <m@bues.ch>
>> > Signed-off-by: Guenter Roeck <linux@roeck-us.net>
>>
>> Thanks, 2 patches applied to wireless-drivers-next.git:
>>
>> 9791333a840f b43: Remove unused phy_a code
>> afdfdc481ea9 b43: Completely remove support for phy_a
>
> Did anybody test this on any hardware? I think this should be tested
> on some G-PHY hardware, before it goes to Linus.

Larry tested these:

"These two patches have been tested on a BCM4318."

https://patchwork.kernel.org/patch/9154719/

--
Kalle Valo

\
 
 \ /
  Last update: 2016-06-16 18:41    [W:0.078 / U:1.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site