lkml.org 
[lkml]   [2016]   [Jun]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCHv4 07/48] thermal: core: move passive attr to tz->device.groups
From
Date
On 一, 2016-05-30 at 23:18 -0700, Eduardo Valentin wrote:
> This patch moves the passive attribute to tz->device.groups. Moving
> the
> passive attribute also requires a .is_visible() callback
> implementation
> for its attribute group.
>
> The logic behind the visibility of passive attribute is kept the
> same.
> We only expose the passive attribute if the thermal driver has
> exposed
> at least one passive trip point.
>
No, the passive attribute is only present for zones in which the
passive cooling policy is not supported by native thermal driver.

> Cc: Zhang Rui <rui.zhang@intel.com>
> Cc: linux-pm@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
> ---
>  drivers/thermal/thermal_core.c | 42
> +++++++++++++++++++++++++++++++++---------
>  1 file changed, 33 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/thermal/thermal_core.c
> b/drivers/thermal/thermal_core.c
> index 19fea9e..efc190c 100644
> --- a/drivers/thermal/thermal_core.c
> +++ b/drivers/thermal/thermal_core.c
> @@ -1056,9 +1056,42 @@ static struct attribute_group
> thermal_zone_mode_attribute_group = {
>   .is_visible = thermal_zone_mode_is_visible,
>  };
>  
> +/* We expose passive only if passive trips are present */
> +static struct attribute *thermal_zone_passive_attrs[] = {
> + &dev_attr_passive.attr,
> + NULL,
> +};
> +
> +static umode_t thermal_zone_passive_is_visible(struct kobject *kobj,
> +        struct attribute
> *attr,
> +        int attrno)
> +{
> + struct device *dev = container_of(kobj, struct device,
> kobj);
> + struct thermal_zone_device *tz;
> + enum thermal_trip_type trip_type;
> + int count;
> +
> + tz = container_of(dev, struct thermal_zone_device, device);
> +
> + for (count = 0; count < tz->trips; count++) {
> + tz->ops->get_trip_type(tz, count, &trip_type);
> +
> + if (trip_type == THERMAL_TRIP_PASSIVE)
> + return attr->mode;
we should
return 0;
> + }
> +
> + return 0;
and
return attr->mode;

thanks,
rui
> +}
> +
> +static struct attribute_group thermal_zone_passive_attribute_group =
> {
> + .attrs = thermal_zone_passive_attrs,
> + .is_visible = thermal_zone_passive_is_visible,
> +};
> +
>  static const struct attribute_group *thermal_zone_attribute_groups[]
> = {
>   &thermal_zone_attribute_group,
>   &thermal_zone_mode_attribute_group,
> + &thermal_zone_passive_attribute_group,
>   NULL
>  };
>  
> @@ -1843,7 +1876,6 @@ struct thermal_zone_device
> *thermal_zone_device_register(const char *type,
>   int trip_temp;
>   int result;
>   int count;
> - int passive = 0;
>   struct thermal_governor *governor;
>  
>   if (!type || strlen(type) == 0)
> @@ -1904,8 +1936,6 @@ struct thermal_zone_device
> *thermal_zone_device_register(const char *type,
>   for (count = 0; count < trips; count++) {
>   if (tz->ops->get_trip_type(tz, count, &trip_type))
>   set_bit(count, &tz->trips_disabled);
> - if (trip_type == THERMAL_TRIP_PASSIVE)
> - passive = 1;
>   if (tz->ops->get_trip_temp(tz, count, &trip_temp))
>   set_bit(count, &tz->trips_disabled);
>   /* Check for bogus trip points */
> @@ -1913,12 +1943,6 @@ struct thermal_zone_device
> *thermal_zone_device_register(const char *type,
>   set_bit(count, &tz->trips_disabled);
>   }
>  
> - if (!passive) {
> - result = device_create_file(&tz->device,
> &dev_attr_passive);
> - if (result)
> - goto unregister;
> - }
> -
>   /* Update 'this' zone's governor information */
>   mutex_lock(&thermal_governor_lock);
>  

\
 
 \ /
  Last update: 2016-06-16 06:01    [W:0.206 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site