lkml.org 
[lkml]   [2016]   [Jun]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 4/6] mtd: nand: gpmi: correct bitflip for erased NAND page
On Fri, 10 Jun 2016 12:01:32 -0500
Han Xu <han.xu@nxp.com> wrote:

> i.MX6QP and i.MX7D BCH module integrated a new feature to detect the
> bitflip number for erased NAND page. So for these two platform, set the
> erase threshold to ecc_strength and if bitflip detected, GPMI driver
> will correct the data to all 0xFF.
>
> Signed-off-by: Han Xu <han.xu@nxp.com>
> ---
> drivers/mtd/nand/gpmi-nand/bch-regs.h | 10 ++++++++++
> drivers/mtd/nand/gpmi-nand/gpmi-lib.c | 5 +++++
> drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 27 ++++++++++++++++++++++++++-
> 3 files changed, 41 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mtd/nand/gpmi-nand/bch-regs.h b/drivers/mtd/nand/gpmi-nand/bch-regs.h
> index 228142c..2c44b88 100644
> --- a/drivers/mtd/nand/gpmi-nand/bch-regs.h
> +++ b/drivers/mtd/nand/gpmi-nand/bch-regs.h
> @@ -30,7 +30,13 @@
> #define BM_BCH_CTRL_COMPLETE_IRQ (1 << 0)
>
> #define HW_BCH_STATUS0 0x00000010
> +
> #define HW_BCH_MODE 0x00000020
> +#define BP_BCH_MODE_ERASE_THRESHOLD 0
> +#define BM_BCH_MODE_ERASE_THRESHOLD (0xff << BP_BCH_MODE_ERASE_THRESHOLD)
> +#define BF_BCH_MODE_ERASE_THRESHOLD(v) \
> + (((v) << BP_BCH_MODE_ERASE_THRESHOLD) & BM_BCH_MODE_ERASE_THRESHOLD)
> +
> #define HW_BCH_ENCODEPTR 0x00000030
> #define HW_BCH_DATAPTR 0x00000040
> #define HW_BCH_METAPTR 0x00000050
> @@ -125,4 +131,8 @@
> )
>
> #define HW_BCH_VERSION 0x00000160
> +#define HW_BCH_DEBUG1 0x00000170
> +#define BP_BCH_DEBUG1_ERASED_ZERO_COUNT 0
> +#define BM_BCH_DEBUG1_ERASED_ZERO_COUNT \
> + (0x1ff << BP_BCH_DEBUG1_ERASED_ZERO_COUNT)
> #endif
> diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
> index 358ff5d..0b5666a 100644
> --- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
> +++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
> @@ -298,6 +298,11 @@ int bch_set_geometry(struct gpmi_nand_data *this)
> | BF_BCH_FLASH0LAYOUT1_DATAN_SIZE(block_size, this),
> r->bch_regs + HW_BCH_FLASH0LAYOUT1);
>
> + /* Set erase threshold to ecc_strength for mx6qp and mx7 */
> + if (GPMI_IS_MX6QP(this) || GPMI_IS_MX7(this))
> + writel(BF_BCH_MODE_ERASE_THRESHOLD(ecc_strength),
> + r->bch_regs + HW_BCH_MODE);
> +
> /* Set *all* chip selects to use layout 0. */
> writel(0, r->bch_regs + HW_BCH_LAYOUTSELECT);
>
> diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
> index aedaff3..03bdb4d 100644
> --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
> +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
> @@ -1043,6 +1043,7 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
> {
> struct gpmi_nand_data *this = nand_get_controller_data(chip);
> struct bch_geometry *nfc_geo = &this->bch_geometry;
> + void __iomem *bch_regs = this->resources.bch_regs;
> void *payload_virt;
> dma_addr_t payload_phys;
> void *auxiliary_virt;
> @@ -1051,6 +1052,8 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
> unsigned char *status;
> unsigned int max_bitflips = 0;
> int ret;
> + int bitflips = 0;
> + int bitflip_flag = 0;

Hm, I would choose another name, but I'm not even sure this is really
needed (see below).

>
> dev_dbg(this->dev, "page number is : %d\n", page);
> ret = read_page_prepare(this, buf, nfc_geo->payload_size,
> @@ -1088,8 +1091,20 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
> payload_virt, payload_phys);
>
> for (i = 0; i < nfc_geo->ecc_chunk_count; i++, status++) {
> - if ((*status == STATUS_GOOD) || (*status == STATUS_ERASED))
> + if (*status == STATUS_GOOD)
> + continue;
> + if (*status == STATUS_ERASED) {
> + if (GPMI_IS_MX6QP(this) || GPMI_IS_MX7(this)) {
> + bitflips = readl(bch_regs + HW_BCH_DEBUG1);

You could use ret here or define a flips variable locally to this code
(see what's done for the software correction).

BTW, why not memset-ing the data chunk here (as done for the SW
correction part). This way you wouldn't need the extra bitflips_flag
variable.

> + if (bitflips) {
> + bitflip_flag = 1;
> + max_bitflips = max_t(unsigned int,
> + max_bitflips,
> + bitflips);
> + }
> + }
> continue;
> + }
>
> if (*status == STATUS_UNCORRECTABLE) {
> int eccbits = nfc_geo->ecc_strength * nfc_geo->gf_len;
> @@ -1098,6 +1113,10 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
> int eccbytes;
> int flips;
>
> + /* shortcut for i.MX7 and i.MX6QP */
> + if (GPMI_IS_MX6QP(this) || GPMI_IS_MX7(this))

You should increment mtd->ecc_stats.failed in this case.

> + continue;
> +
> /* Read ECC bytes into our internal raw_buffer */
> offset = nfc_geo->metadata_size * 8;
> offset += ((8 * nfc_geo->ecc_chunk_size) + eccbits) * (i + 1);
> @@ -1182,6 +1201,12 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
> chip->oob_poi[0] = ((uint8_t *) auxiliary_virt)[0];
> }
>
> + /* if bitflip occurred in erased page, change data to all 0xff */
> + if (bitflip_flag) {
> + memset(buf, ~0, nfc_geo->payload_size);
> + memset(chip->oob_poi, ~0, mtd->oobsize);
> + }
> +
> return max_bitflips;
> }
>



--
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

\
 
 \ /
  Last update: 2016-06-14 21:41    [W:0.309 / U:0.216 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site