lkml.org 
[lkml]   [2016]   [Jun]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/3] net: Add MDIO bus driver for the Hisilicon FEMAC
On Mon, Jun 13, 2016 at 02:07:54PM +0800, Dongpo Li wrote:
> This patch adds a separate driver for the MDIO interface of the
> Hisilicon Fast Ethernet MAC.
>
> Reviewed-by: Jiancheng Xue <xuejiancheng@hisilicon.com>
> Signed-off-by: Dongpo Li <lidongpo@hisilicon.com>
> ---
> .../bindings/net/hisilicon-femac-mdio.txt | 22 +++
> drivers/net/phy/Kconfig | 8 +
> drivers/net/phy/Makefile | 1 +
> drivers/net/phy/mdio-hisi-femac.c | 165 +++++++++++++++++++++
> 4 files changed, 196 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/net/hisilicon-femac-mdio.txt
> create mode 100644 drivers/net/phy/mdio-hisi-femac.c
>
> diff --git a/Documentation/devicetree/bindings/net/hisilicon-femac-mdio.txt b/Documentation/devicetree/bindings/net/hisilicon-femac-mdio.txt
> new file mode 100644
> index 0000000..6f46337
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/hisilicon-femac-mdio.txt
> @@ -0,0 +1,22 @@
> +Hisilicon Fast Ethernet MDIO Controller interface
> +
> +Required properties:
> +- compatible: should be "hisilicon,hisi-femac-mdio".
> +- reg: address and length of the register set for the device.
> +- clocks: A phandle to the reference clock for this device.
> +
> +- PHY subnode: inherits from phy binding [1]
> +[1] Documentation/devicetree/bindings/net/phy.txt
> +
> +Example:
> +mdio: mdio@10091100 {
> + compatible = "hisilicon,hisi-femac-mdio";
> + reg = <0x10091100 0x10>;
> + clocks = <&crg HI3518EV200_MDIO_CLK>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + phy0: phy@1 {
> + reg = <1>;
> + };
> +};
> diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
> index 6dad9a9..e257322 100644
> --- a/drivers/net/phy/Kconfig
> +++ b/drivers/net/phy/Kconfig
> @@ -271,6 +271,14 @@ config MDIO_BCM_IPROC
> This module provides a driver for the MDIO busses found in the
> Broadcom iProc SoC's.
>
> +config MDIO_HISI_FEMAC
> + tristate "Hisilicon FEMAC MDIO bus controller"
> + depends on ARCH_HISI
> + depends on HAS_IOMEM && OF_MDIO
> + help
> + This module provides a driver for the MDIO busses found in the
> + Hisilicon SoC that have an Fast Ethernet MAC.
> +
> endif # PHYLIB
>
> config MICREL_KS8995MA
> diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
> index fcdbb92..039c4be 100644
> --- a/drivers/net/phy/Makefile
> +++ b/drivers/net/phy/Makefile
> @@ -44,3 +44,4 @@ obj-$(CONFIG_MDIO_MOXART) += mdio-moxart.o
> obj-$(CONFIG_MDIO_BCM_UNIMAC) += mdio-bcm-unimac.o
> obj-$(CONFIG_MICROCHIP_PHY) += microchip.o
> obj-$(CONFIG_MDIO_BCM_IPROC) += mdio-bcm-iproc.o
> +obj-$(CONFIG_MDIO_HISI_FEMAC) += mdio-hisi-femac.o
> diff --git a/drivers/net/phy/mdio-hisi-femac.c b/drivers/net/phy/mdio-hisi-femac.c
> new file mode 100644
> index 0000000..a9eea61
> --- /dev/null
> +++ b/drivers/net/phy/mdio-hisi-femac.c
> @@ -0,0 +1,165 @@
> +/*
> + * Hisilicon Fast Ethernet MDIO Bus Driver
> + *
> + * Copyright (c) 2016 HiSilicon Technologies Co., Ltd.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/iopoll.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of_address.h>
> +#include <linux/of_mdio.h>
> +#include <linux/platform_device.h>
> +
> +#define MDIO_RWCTRL 0x00
> +#define MDIO_RO_DATA 0x04
> +#define MDIO_WRITE BIT(13)
> +#define MDIO_RW_FINISH BIT(15)
> +#define BIT_PHY_ADDR_OFFSET 8
> +#define BIT_WR_DATA_OFFSET 16
> +
> +struct hisi_femac_mdio_data {
> + struct clk *clk;
> + void __iomem *membase;
> +};
> +

Hi Dongpo

Overall this looks good. Just some minor comments

> +static int hisi_femac_mdio_wait_ready(struct mii_bus *bus)
> +{
> + struct hisi_femac_mdio_data *data = bus->priv;

You could just pass data here. Your read and write functions already
have it.

> + data->clk = devm_clk_get(&pdev->dev, NULL);
> + if (IS_ERR(data->clk)) {
> + ret = -ENODEV;
> + goto err_out_free_mdiobus;
> + }

Return the error which devm_clk_get() gives you.

> +
> + ret = clk_prepare_enable(data->clk);
> + if (ret)
> + goto err_out_free_mdiobus;
> +
> + ret = of_mdiobus_register(bus, np);
> + if (ret)
> + goto err_out_free_mdiobus;

You leave the clock prepared and enabled on error.

Andrew

\
 
 \ /
  Last update: 2016-06-13 16:01    [W:0.140 / U:0.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site