lkml.org 
[lkml]   [2016]   [Jun]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 5/6] dt-bindings: add Sharp LQ123P1JX31 panel binding
On Fri, Jun 10, 2016 at 11:40 AM, Doug Anderson <dianders@chromium.org> wrote:
> Rob,
>
> On Fri, Jun 10, 2016 at 6:42 AM, Rob Herring <robh@kernel.org> wrote:
>> On Wed, Jun 08, 2016 at 07:52:45PM +0800, Yakir Yang wrote:
>>> The Sharp LQ123P1JX31 is an 12.3" 2400x1600 TFT-LCD panel
>>> connected using eDP interfaces.
>>>
>>> Signed-off-by: Yakir Yang <ykk@rock-chips.com>
>>> ---
>>> Changes in v2:
>>> - Add dt-bindings of Sharp LQ123P1JX31 panel in v2
>>>
>>> .../devicetree/bindings/display/panel/sharp,lq123p1jx31.txt | 7 +++++++
>>> 1 file changed, 7 insertions(+)
>>> create mode 100644 Documentation/devicetree/bindings/display/panel/sharp,lq123p1jx31.txt
>>>
>>> diff --git a/Documentation/devicetree/bindings/display/panel/sharp,lq123p1jx31.txt b/Documentation/devicetree/bindings/display/panel/sharp,lq123p1jx31.txt
>>> new file mode 100644
>>> index 0000000..81938c0
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/display/panel/sharp,lq123p1jx31.txt
>>> @@ -0,0 +1,7 @@
>>> +Sharp 12.3" (2400x1600 pixels) TFT LCD panel
>>> +
>>> +Required properties:
>>> +- compatible: should be "sharp,lq123p1jx31,"
>> ^
>> Need to drop the comma.
>
> Thanks for catching!
>
>> No regulators or resets or pwms?
>
> Could be more explicit I guess, but Yakir does say:
>
>> This binding is compatible with the simple-panel binding, which is specified
>> in simple-panel.txt in this directory.
>
> In that document it shows:
>
> Required properties:
> - power-supply: regulator to provide the supply voltage
>
> Optional properties:
> - ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
> - enable-gpios: GPIO pin to enable or disable the panel
> - backlight: phandle of the backlight device attached to the panel

Ah yes, NM.

> In general Yakir's bindings document match a huge chunk of the current
> existing bindings. Do this:
> cd Documentation/devicetree/bindings/display/panel
> grep -C20 "This binding is compatible with the simple-panel" *
>
> You'll find a huge chunk of files which are rather formulaic. It
> might make sense to just have one file and a list of panels which are
> simple panels?

If we're just documenting compatible strings, then maybe so.

Rob

\
 
 \ /
  Last update: 2016-06-10 20:41    [W:0.107 / U:0.596 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site