lkml.org 
[lkml]   [2016]   [May]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v9 5/7] vfio/type1: also check IRQ remapping capability at msi domain
On Wed,  4 May 2016 11:54:16 +0000
Eric Auger <eric.auger@linaro.org> wrote:

> On x86 IRQ remapping is abstracted by the IOMMU. On ARM this is abstracted
> by the msi controller. vfio_safe_irq_domain allows to check whether
> interrupts are "safe" for a given device. They are if the device does
> not use MSI

Are we sure we're not opening a security hole here? An MSI is simply a
DMA write, so really whether or not a device uses MSI is irrelevant.
If it can generate a DMA to the MSI doorbell then we need to be
protected and I think we pretty much need to assume that devices are
DMA capable. Do the MSI domain checks cover this?

> or if the device uses MSI and the msi-parent controller
> supports IRQ remapping.
>
> Then we check at group level if all devices have safe interrupts: if not,
> we only allow the group to be attached if allow_unsafe_interrupts is set.
>
> At this point ARM sMMU still advertises IOMMU_CAP_INTR_REMAP. This is
> changed in next patch.
>
> Signed-off-by: Eric Auger <eric.auger@linaro.org>
>
> ---
> v3 -> v4:
> - rename vfio_msi_parent_irq_remapping_capable into vfio_safe_irq_domain
> and irq_remapping into safe_irq_domains
>
> v2 -> v3:
> - protect vfio_msi_parent_irq_remapping_capable with
> CONFIG_GENERIC_MSI_IRQ_DOMAIN
> ---
> drivers/vfio/vfio_iommu_type1.c | 44 +++++++++++++++++++++++++++++++++++++++--
> 1 file changed, 42 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/vfio/vfio_iommu_type1.c b/drivers/vfio/vfio_iommu_type1.c
> index 4d3a6f1..2fc8197 100644
> --- a/drivers/vfio/vfio_iommu_type1.c
> +++ b/drivers/vfio/vfio_iommu_type1.c
> @@ -37,6 +37,8 @@
> #include <linux/vfio.h>
> #include <linux/workqueue.h>
> #include <linux/msi-iommu.h>
> +#include <linux/irqdomain.h>
> +#include <linux/msi.h>
>
> #define DRIVER_VERSION "0.2"
> #define DRIVER_AUTHOR "Alex Williamson <alex.williamson@redhat.com>"
> @@ -777,6 +779,33 @@ static int vfio_bus_type(struct device *dev, void *data)
> return 0;
> }
>
> +/**
> + * vfio_safe_irq_domain: returns whether the irq domain
> + * the device is attached to is safe with respect to MSI isolation.
> + * If the irq domain is not an MSI domain, we return it is safe.
> + *
> + * @dev: device handle
> + * @data: unused
> + * returns 0 if the irq domain is safe, -1 if not.
> + */
> +static int vfio_safe_irq_domain(struct device *dev, void *data)
> +{
> +#ifdef CONFIG_GENERIC_MSI_IRQ_DOMAIN
> + struct irq_domain *domain;
> + struct msi_domain_info *info;
> +
> + domain = dev_get_msi_domain(dev);
> + if (!domain)
> + return 0;
> +
> + info = msi_get_domain_info(domain);
> +
> + if (!(info->flags & MSI_FLAG_IRQ_REMAPPING))
> + return -1;
> +#endif
> + return 0;
> +}
> +
> static int vfio_iommu_replay(struct vfio_iommu *iommu,
> struct vfio_domain *domain)
> {
> @@ -870,7 +899,7 @@ static int vfio_iommu_type1_attach_group(void *iommu_data,
> struct vfio_group *group, *g;
> struct vfio_domain *domain, *d;
> struct bus_type *bus = NULL;
> - int ret;
> + int ret, safe_irq_domains;
>
> mutex_lock(&iommu->lock);
>
> @@ -893,6 +922,13 @@ static int vfio_iommu_type1_attach_group(void *iommu_data,
>
> group->iommu_group = iommu_group;
>
> + /*
> + * Determine if all the devices of the group have a safe irq domain
> + * with respect to MSI isolation
> + */
> + safe_irq_domains = !iommu_group_for_each_dev(iommu_group, &bus,
> + vfio_safe_irq_domain);
> +
> /* Determine bus_type in order to allocate a domain */
> ret = iommu_group_for_each_dev(iommu_group, &bus, vfio_bus_type);
> if (ret)
> @@ -920,8 +956,12 @@ static int vfio_iommu_type1_attach_group(void *iommu_data,
> INIT_LIST_HEAD(&domain->group_list);
> list_add(&group->next, &domain->group_list);
>
> + /*
> + * to advertise safe interrupts either the IOMMU or the MSI controllers
> + * must support IRQ remapping/interrupt translation
> + */
> if (!allow_unsafe_interrupts &&
> - !iommu_capable(bus, IOMMU_CAP_INTR_REMAP)) {
> + (!iommu_capable(bus, IOMMU_CAP_INTR_REMAP) && !safe_irq_domains)) {
> pr_warn("%s: No interrupt remapping support. Use the module param \"allow_unsafe_interrupts\" to enable VFIO IOMMU support on this platform\n",
> __func__);
> ret = -EPERM;

\
 
 \ /
  Last update: 2016-05-10 01:01    [W:0.215 / U:0.204 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site