lkml.org 
[lkml]   [2016]   [May]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[RFC PATCH net-next 19/20] net: dsa: mv88e6xxx: factorize tag protocol
    Date
    6131 is the only driver to set the tag protocol to DSA_TAG_PROTO_DSA.
    Since it works fine with DSA_TAG_PROTO_EDSA, change its value, like all
    other mv88e6xxx drivers.

    Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
    ---
    drivers/net/dsa/Kconfig | 2 +-
    drivers/net/dsa/mv88e6131.c | 2 +-
    2 files changed, 2 insertions(+), 2 deletions(-)

    diff --git a/drivers/net/dsa/Kconfig b/drivers/net/dsa/Kconfig
    index 4aaadce..7e01dce 100644
    --- a/drivers/net/dsa/Kconfig
    +++ b/drivers/net/dsa/Kconfig
    @@ -17,7 +17,7 @@ config NET_DSA_MV88E6131
    tristate "Marvell 88E6085/6095/6095F/6131 ethernet switch chip support"
    depends on NET_DSA
    select NET_DSA_MV88E6XXX
    - select NET_DSA_TAG_DSA
    + select NET_DSA_TAG_EDSA
    ---help---
    This enables support for the Marvell 88E6085/6095/6095F/6131
    ethernet switch chips.
    diff --git a/drivers/net/dsa/mv88e6131.c b/drivers/net/dsa/mv88e6131.c
    index cf7d710..81640f6 100644
    --- a/drivers/net/dsa/mv88e6131.c
    +++ b/drivers/net/dsa/mv88e6131.c
    @@ -75,7 +75,7 @@ static const char *mv88e6131_drv_probe(struct device *dsa_dev,
    }

    struct dsa_switch_driver mv88e6131_switch_driver = {
    - .tag_protocol = DSA_TAG_PROTO_DSA,
    + .tag_protocol = DSA_TAG_PROTO_EDSA,
    .probe = mv88e6131_drv_probe,
    .setup = mv88e6xxx_setup,
    .set_addr = mv88e6xxx_set_addr,
    --
    2.8.2
    \
     
     \ /
      Last update: 2016-05-06 01:01    [W:2.857 / U:0.124 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site