lkml.org 
[lkml]   [2016]   [May]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 1/2] usb: host: ehci-tegra: Grab the correct UTMI pads reset
On Wed, May 04, 2016 at 04:39:59PM +0200, Thierry Reding wrote:
> From: Thierry Reding <treding@nvidia.com>
>
> There are three EHCI controllers on Tegra SoCs, each with its own reset
> line. However, the first controller contains a set of UTMI configuration
> registers that are shared with its siblings. These registers will only
> be reset as part of the first controller's reset. For proper operation
> it must be ensured that the UTMI configuration registers are reset
> before any of the EHCI controllers are enabled, irrespective of the
> probe order.
>
> Commit a47cc24cd1e5 ("USB: EHCI: tegra: Fix probe order issue leading to
> broken USB") introduced code that ensures the first controller is always
> reset before setting up any of the controllers, and is never again reset
> afterwards.
>
> This code, however, grabs the wrong reset. Each EHCI controller has two
> reset controls attached: 1) the USB controller reset and 2) the UTMI
> pads reset (really the first controller's reset). In order to reset the
> UTMI pads registers the code must grab the second reset, but instead it
> grabbing the first.
>
> Signed-off-by: Thierry Reding <treding@nvidia.com>

Any reason you don't want this backported to stable kernels?

\
 
 \ /
  Last update: 2016-05-04 17:21    [W:0.120 / U:0.728 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site