lkml.org 
[lkml]   [2016]   [May]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3.14 20/20] serial: samsung: Reorder the sequence of clock control when call s3c24xx_serial_set_termios()
Date
3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chanwoo Choi <cw00.choi@samsung.com>

commit b8995f527aac143e83d3900ff39357651ea4e0f6 upstream.

This patch fixes the broken serial log when changing the clock source
of uart device. Before disabling the original clock source, this patch
enables the new clock source to protect the clock off state for a split second.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>

---
drivers/tty/serial/samsung.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -734,6 +734,8 @@ static void s3c24xx_serial_set_termios(s
/* check to see if we need to change clock source */

if (ourport->baudclk != clk) {
+ clk_prepare_enable(clk);
+
s3c24xx_serial_setsource(port, clk_sel);

if (!IS_ERR(ourport->baudclk)) {
@@ -741,8 +743,6 @@ static void s3c24xx_serial_set_termios(s
ourport->baudclk = ERR_PTR(-EINVAL);
}

- clk_prepare_enable(clk);
-
ourport->baudclk = clk;
ourport->baudclk_rate = clk ? clk_get_rate(clk) : 0;
}

\
 
 \ /
  Last update: 2016-05-31 00:21    [W:0.044 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site