lkml.org 
[lkml]   [2016]   [May]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [STLinux Kernel] [PATCH 02/11] drivers: clk: st: Add clock propagation for audio clocks
On Thu, May 26, 2016 at 8:05 AM, loic pallardy <loic.pallardy@st.com> wrote:
>
>
> On 05/26/2016 02:46 PM, Rob Herring wrote:
>>
>> On Thu, May 26, 2016 at 4:49 AM, Gabriel Fernandez
>> <gabriel.fernandez@linaro.org> wrote:
>>>
>>> On 25 May 2016 at 19:24, Rob Herring <robh@kernel.org> wrote:
>>>>
>>>>
>>>> On Wed, May 18, 2016 at 10:41:23AM +0200, Gabriel Fernandez wrote:
>>>>>
>>>>> This patch allows fine tuning of the quads FS for audio clocks
>>>>> accuracy.
>>>>>
>>>>> Signed-off-by: Olivier Bideau <olivier.bideau@st.com>
>>>>> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
>>>>> ---
>>>>> .../devicetree/bindings/clock/st/st,flexgen.txt | 1 +
>>>>> drivers/clk/st/clk-flexgen.c | 24
>>>>> ++++++++++++++++++++++
>>>>> 2 files changed, 25 insertions(+)
>>>>>
>>>>> diff --git a/Documentation/devicetree/bindings/clock/st/st,flexgen.txt
>>>>> b/Documentation/devicetree/bindings/clock/st/st,flexgen.txt
>>>>> index b7ee5c7..15b33c7 100644
>>>>> --- a/Documentation/devicetree/bindings/clock/st/st,flexgen.txt
>>>>> +++ b/Documentation/devicetree/bindings/clock/st/st,flexgen.txt
>>>>> @@ -60,6 +60,7 @@ This binding uses the common clock binding[2].
>>>>> Required properties:
>>>>> - compatible : shall be:
>>>>> "st,flexgen"
>>>>> + "st,stih407-clkgend0", "st,flexgen" (enable clock propagation on
>>>>> parent)
>>>>
>>>>
>>>> What do "d0" and "d2" refer to?
>>>>
>>>> This seems to indicate you have too much clock detail in the DT (with
>>>> individual clocks described) or not enough with genericish compatible
>>>> strings. What happens for the mext clock you need to adjust the flags
>>>> on? You should be able to make these adjustments without DT updates.
>>>> Perhaps you need a wider fixing of clock compatible strings.
>>>>
>>>> Rob
>>>
>>>
>>> Sorry i sent my response in html...
>>>
>>> Hi Rob,
>>>
>>> Thanks for reviewing.
>>>
>>> Can i remove
>>> "
>>> st,stih407-clkgend0" & "
>>> st,stih407-clkgend2" compatible strings and add proprieties instead ?
>>> I only need to activate 2 features and then we can keep generic
>>> compatible strings.
>>
>>
> Hi Rob,
>>
>> That is no different and suffers the same point I raised. It requires
>> updating the DT for any clock configuration change or enhancement.
>>
> Agree with you, DT update is needed as soon as a clock configuration should
> be changed. This is due to STiH clock driver design based on DT description
> of SoC clock tree.
>
> This clock driver was accepted 2 years ago. At the time being there was
> discussion about clock tree description location: driver or DT.
> Bad choice was done for this driver...
>
> If we decide to redesign STiH clock driver using in-driver clock tree
> description, this will modify STiH clock DT nodes description and so break
> DT backward compatibility.
>
> What's from your pov the best option?

You can break it once or every time you need a clock change. I'd go
with the former. Maybe more specific compatible strings throughout
alone would be enough rather than a flag day changing the binding.

Rob

\
 
 \ /
  Last update: 2016-05-26 15:41    [W:0.045 / U:1.688 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site