lkml.org 
[lkml]   [2016]   [May]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v11 3/3] Bluetooth: hci_uart: Support firmware download for Marvell
Date
Hi Marcel,

> > From: Amitkumar Karwar [mailto:akarwar@marvell.com]
> > Sent: Friday, May 06, 2016 9:02 PM
> > To: linux-bluetooth@vger.kernel.org
> > Cc: linux-kernel@vger.kernel.org; Ganapathi Bhat; Amitkumar Karwar
> > Subject: [PATCH v11 3/3] Bluetooth: hci_uart: Support firmware
> > download for Marvell
> >
> > From: Ganapathi Bhat <gbhat@marvell.com>
> >
> > This patch implement firmware download feature for Marvell Bluetooth
> > devices. If firmware is already downloaded, it will skip downloading.
> >
> > Signed-off-by: Ganapathi Bhat <gbhat@marvell.com>
> > Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
> > ---
> > v2: Fixed compilation warning reported by kbuild test robot
> > v3: Addressed review comments from Marcel Holtmann
> > a) Removed vendor specific code from hci_ldisc.c
> > b) Get rid of static forward declaration
> > c) Removed unnecessary heavy nesting
> > d) Git rid of module parameter and global variables
> > e) Add logic to pick right firmware image
> > v4: Addresses review comments from Alan
> > a) Use existing kernel helper APIs instead of writing own.
> > b) Replace mdelay() with msleep()
> > v5: Addresses review comments from Loic Poulain
> > a) Use bt_dev_err/warn/dbg helpers insted of BT_ERR/WARN/DBG
> > b) Used static functions where required and removed forward
> > delcarations
> > c) Edited comments for the function hci_uart_recv_data
> > d) Made HCI_UART_DNLD_FW flag a part of driver private data
> > v6: Addresses review comments from Loic Poulain
> > a) Used skb instead of array to store firmware data during
> download
> > b) Used hci_uart_tx_wakeup and enqueued packets instead of tty
> write
> > c) Used GFP_KERNEL instead of GFP_ATOMIC
> > v7: Edited Kconfig to add dependency for BT_HCIUART_H4. The change
> > resolves
> > errors reported by kbuild test robot.
> > v8: Addressed review comments from Marcel Holtmann
> > a) Removed unnecessary memory allocation failure messages
> > b) Get rid of btmrvl.h header file and add definitions in
> > hci_mrvl.c file
> > v9: Addressed review comments from Marcel Holtmann
> > a) Moved firmware download code from setup to prepare handler.
> > b) Change messages from bt_dev_*->BT_*, as hdev isn't available
> > during firmware
> > download.
> > v10: Addressed review comments from Marcel Holtmann
> > a) Added new callback recv_for_prepare to receive data from device
> > during prepare phase
> > b) Avoided using private flags (HCI_UART_DNLD_FW) as new receive
> > callback is
> > added for the same purpose
> > c) Used kernel API to handle unaligned data
> > d) Moved mrvl_set_baud functionality inside setup callback
> > v11: Write data through ldisc in mrvl_send_ack() instead of directly
> > calling
> > write method(One Thousand Gnomes).
>

Could you please take this patch?

Regards,
Amitkumar

\
 
 \ /
  Last update: 2016-05-23 08:21    [W:0.093 / U:0.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site