lkml.org 
[lkml]   [2016]   [May]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [PATCH V5 0/3] soc/tegra: Add support for IO pads power and voltage control
    Hi Jon/Thierry,

    On Thursday 12 May 2016 05:51 PM, Laxman Dewangan wrote:
    > The IO pins of Tegra SoCs are grouped for common control of IO interface
    > like setting voltage signal levels and power state of the interface. The
    > group is generally referred as IO pads. The power state and voltage control
    > of IO pins can be done at IO pads level.
    >
    > Tegra124 onwards IO pads support the power down state when system is
    > active. The voltage levels on IO pads are auto detected on Tegra124/
    > Tegra132 but it is not in Tegra210. For Tegra210, the SW need to
    > explicitly configure the voltage levels of IO pads
    >
    > This series add the interface for the IO pad power state and voltage
    > configurations. Modifies the client to use new APIs.
    > Register the child devices to provide the client interface to configure
    > IO pads power state and voltage from Device tree.
    >

    Any comment on this series?

    \
     
     \ /
      Last update: 2016-05-19 10:21    [W:4.226 / U:0.072 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site