lkml.org 
[lkml]   [2016]   [May]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC 5/8] usb: phy: msm: move register definitions into driver
Date
The linux/usb/msm_hsusb_hw.h header is now only included
by one file and can be merged into that for simplicity.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
drivers/usb/phy/phy-msm-usb.c | 56 +++++++++++++++++++++++++++++-
include/linux/usb/msm_hsusb_hw.h | 74 ----------------------------------------
2 files changed, 55 insertions(+), 75 deletions(-)
delete mode 100644 include/linux/usb/msm_hsusb_hw.h

diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c
index f559d73fd7bc..ea4ed6c17b00 100644
--- a/drivers/usb/phy/phy-msm-usb.c
+++ b/drivers/usb/phy/phy-msm-usb.c
@@ -46,9 +46,63 @@
#include <linux/usb/ulpi.h>
#include <linux/usb/gadget.h>
#include <linux/usb/hcd.h>
-#include <linux/usb/msm_hsusb_hw.h>
#include <linux/regulator/consumer.h>

+#define USB_AHBBURST (MSM_USB_BASE + 0x0090)
+#define USB_AHBMODE (MSM_USB_BASE + 0x0098)
+#define USB_GENCONFIG_2 (MSM_USB_BASE + 0x00a0)
+#define ULPI_TX_PKT_EN_CLR_FIX BIT(19)
+
+#define USB_CAPLENGTH (MSM_USB_BASE + 0x0100) /* 8 bit */
+
+#define USB_USBCMD (MSM_USB_BASE + 0x0140)
+#define USB_PORTSC (MSM_USB_BASE + 0x0184)
+#define USB_OTGSC (MSM_USB_BASE + 0x01A4)
+#define USB_USBMODE (MSM_USB_BASE + 0x01A8)
+#define USB_PHY_CTRL (MSM_USB_BASE + 0x0240)
+#define USB_PHY_CTRL2 (MSM_USB_BASE + 0x0278)
+
+#define GENCONFIG_2_SESS_VLD_CTRL_EN BIT(7)
+#define USBCMD_SESS_VLD_CTRL BIT(25)
+
+#define USBCMD_RESET 2
+#define USB_USBINTR (MSM_USB_BASE + 0x0148)
+
+#define PORTSC_PHCD (1 << 23) /* phy suspend mode */
+#define PORTSC_PTS_MASK (3 << 30)
+#define PORTSC_PTS_ULPI (2 << 30)
+#define PORTSC_PTS_SERIAL (3 << 30)
+
+#define USB_ULPI_VIEWPORT (MSM_USB_BASE + 0x0170)
+#define ULPI_RUN (1 << 30)
+#define ULPI_WRITE (1 << 29)
+#define ULPI_READ (0 << 29)
+#define ULPI_ADDR(n) (((n) & 255) << 16)
+#define ULPI_DATA(n) ((n) & 255)
+#define ULPI_DATA_READ(n) (((n) >> 8) & 255)
+
+/* synopsys 28nm phy registers */
+#define ULPI_PWR_CLK_MNG_REG 0x88
+#define OTG_COMP_DISABLE BIT(0)
+
+#define ULPI_MISC_A 0x96
+#define ULPI_MISC_A_VBUSVLDEXTSEL BIT(1)
+#define ULPI_MISC_A_VBUSVLDEXT BIT(0)
+
+#define ASYNC_INTR_CTRL (1 << 29) /* Enable async interrupt */
+#define ULPI_STP_CTRL (1 << 30) /* Block communication with PHY */
+#define PHY_RETEN (1 << 1) /* PHY retention enable/disable */
+#define PHY_POR_ASSERT (1 << 0) /* USB2 28nm PHY POR ASSERT */
+
+/* OTG definitions */
+#define OTGSC_INTSTS_MASK (0x7f << 16)
+#define OTGSC_ID (1 << 8)
+#define OTGSC_BSV (1 << 11)
+#define OTGSC_IDIS (1 << 16)
+#define OTGSC_BSVIS (1 << 19)
+#define OTGSC_IDIE (1 << 24)
+#define OTGSC_BSVIE (1 << 27)
+
/**
* OTG control
*
diff --git a/include/linux/usb/msm_hsusb_hw.h b/include/linux/usb/msm_hsusb_hw.h
deleted file mode 100644
index 368e94389bf1..000000000000
--- a/include/linux/usb/msm_hsusb_hw.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * Copyright (C) 2007 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __LINUX_USB_GADGET_MSM72K_UDC_H__
-#define __LINUX_USB_GADGET_MSM72K_UDC_H__
-
-#define USB_AHBBURST (MSM_USB_BASE + 0x0090)
-#define USB_AHBMODE (MSM_USB_BASE + 0x0098)
-#define USB_GENCONFIG_2 (MSM_USB_BASE + 0x00a0)
-#define ULPI_TX_PKT_EN_CLR_FIX BIT(19)
-
-#define USB_CAPLENGTH (MSM_USB_BASE + 0x0100) /* 8 bit */
-
-#define USB_USBCMD (MSM_USB_BASE + 0x0140)
-#define USB_PORTSC (MSM_USB_BASE + 0x0184)
-#define USB_OTGSC (MSM_USB_BASE + 0x01A4)
-#define USB_USBMODE (MSM_USB_BASE + 0x01A8)
-#define USB_PHY_CTRL (MSM_USB_BASE + 0x0240)
-#define USB_PHY_CTRL2 (MSM_USB_BASE + 0x0278)
-
-#define GENCONFIG_2_SESS_VLD_CTRL_EN BIT(7)
-#define USBCMD_SESS_VLD_CTRL BIT(25)
-
-#define USBCMD_RESET 2
-#define USB_USBINTR (MSM_USB_BASE + 0x0148)
-
-#define PORTSC_PHCD (1 << 23) /* phy suspend mode */
-#define PORTSC_PTS_MASK (3 << 30)
-#define PORTSC_PTS_ULPI (2 << 30)
-#define PORTSC_PTS_SERIAL (3 << 30)
-
-#define USB_ULPI_VIEWPORT (MSM_USB_BASE + 0x0170)
-#define ULPI_RUN (1 << 30)
-#define ULPI_WRITE (1 << 29)
-#define ULPI_READ (0 << 29)
-#define ULPI_ADDR(n) (((n) & 255) << 16)
-#define ULPI_DATA(n) ((n) & 255)
-#define ULPI_DATA_READ(n) (((n) >> 8) & 255)
-
-/* synopsys 28nm phy registers */
-#define ULPI_PWR_CLK_MNG_REG 0x88
-#define OTG_COMP_DISABLE BIT(0)
-
-#define ULPI_MISC_A 0x96
-#define ULPI_MISC_A_VBUSVLDEXTSEL BIT(1)
-#define ULPI_MISC_A_VBUSVLDEXT BIT(0)
-
-#define ASYNC_INTR_CTRL (1 << 29) /* Enable async interrupt */
-#define ULPI_STP_CTRL (1 << 30) /* Block communication with PHY */
-#define PHY_RETEN (1 << 1) /* PHY retention enable/disable */
-#define PHY_POR_ASSERT (1 << 0) /* USB2 28nm PHY POR ASSERT */
-
-/* OTG definitions */
-#define OTGSC_INTSTS_MASK (0x7f << 16)
-#define OTGSC_ID (1 << 8)
-#define OTGSC_BSV (1 << 11)
-#define OTGSC_IDIS (1 << 16)
-#define OTGSC_BSVIS (1 << 19)
-#define OTGSC_IDIE (1 << 24)
-#define OTGSC_BSVIE (1 << 27)
-
-#endif /* __LINUX_USB_GADGET_MSM72K_UDC_H__ */
--
2.7.0
\
 
 \ /
  Last update: 2016-05-18 23:41    [W:0.129 / U:0.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site